Evaluation of Cu-bumps with lead-free solders for flip-chip package applications
顯示簡易詮釋資料 統計資料| 欄位 | 內容 | 語言 |
|---|---|---|
dc.citation.epage |
2395 | en_US |
dc.citation.issue |
12 | en_US |
dc.citation.spage |
2392 | en_US |
dc.citation.volume |
86 | en_US |
dc.citation.woscount |
10 | |
dc.contributor.author |
Lin, Kung-Liang | en_US |
dc.contributor.author |
Chang, Edward-Yi | en_US |
dc.contributor.author |
Shih, Lin-Chi | en_US |
dc.contributor.department |
材料科學與工程學系 | zh_TW |
dc.contributor.department |
Department of Materials Science and Engineering | en_US |
dc.date.accessioned |
2014-12-08T15:08:10Z | |
dc.date.available |
2014-12-08T15:08:10Z | |
dc.date.issued |
2009-12-01 | en_US |
dc.description.abstract |
Low cost electroplated Cu-bump with environmental friendly Sn solder was developed for flip-chip applications. The seed layer used was Ti/WN(x)/Ti/Cu where WN(x) was used as the Cu diffusion barrier and Ti was used to enhance the adhesion between bump and the chip pad. Thick negative photoresist (THB JSR-151N) with a high aspect ratio of 2.4 was used for electroplating of copper bump and Sn solder. The Sn solder cap was reflowed at 225 degrees for 6 min at N(2) atmosphere. No wetting phenomenon was observed for the Sn solder as evaluated by energy-dispersed spectroscopy (EDS). The Cu-bump with Ti/WN(x)/Ti/Cu seed layer not only have higher shear force than the Cu-bump with Ti/Cu seed layer but also has higher resistance to fatigue failure than the Au, SnCu, SnAg bumps. (C) 2009 Elsevier B.V. All rights reserved. | en_US |
dc.identifier.doi |
10.1016/j.mee.2009.04.027 | en_US |
dc.identifier.issn |
0167-9317 | en_US |
dc.identifier.journal |
MICROELECTRONIC ENGINEERING | en_US |
dc.identifier.uri |
http://dx.doi.org/10.1016/j.mee.2009.04.027 | en_US |
dc.identifier.uri |
https://ir.lib.nycu.edu.tw/handle/11536/6376 | |
dc.identifier.wosnumber |
WOS:000271846900005 | |
dc.language.iso |
en_US | en_US |
dc.subject |
Copper bump | en_US |
dc.subject |
Lead-free | en_US |
dc.subject |
Electroplating | en_US |
dc.title |
Evaluation of Cu-bumps with lead-free solders for flip-chip package applications | en_US |
dc.type |
Article | en_US |
檔案
- 000271846900005.pdf (442.6 KB, Adobe PDF)
所屬典藏: 期刊論文
引用此條目
Lin, K.-L., Chang, E.-Y., & Shih, L.-C. (2009). Evaluation of Cu-bumps with lead-free solders for flip-chip package applications. MICROELECTRONIC ENGINEERING, 86(12), 2392–2395. https://doi.org/10.1016/j.mee.2009.04.027
引用文字依 APA 第 7 版格式自動產生,使用前請再核對。
分享
永久網址:https://ir.lib.nycu.edu.tw/handle/11536/6376