Browsing by Author "Hsu, Yu-Chien"

Now showing 1 - 4 of 4

An Organic Hole Transport Layer Enhances the Performance of Colloidal PbSe Quantum Dot Photovoltaic Devices
(2010-10-22)
Kuo, Chih-Yin
;
Su, Ming-Shin
;
Hsu, Yu-Chien
;
Lin, Hui-Ni
;
Wei, Kung-Hwa
A thin poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole transport layer enhances the AM1.5 power conversion efficiency of a PbSe quantum dot (QD)-containing photovoltaic device to 2.4%, from 1.5% for a standard PbSe QD device, a relative increase of 60%. Synchrotron X-ray reflectivity measurements reveal that the roughness of the interfaces between the various layers decreases dramatically in the presence of the PEDOT: PSS layer. In addition, the device life time under continuous simulated AM1.5 irradiation (100 mW cm(-2)), measured in terms of the time required to reach 80% of the normalized efficiency, for the PbSe QD device incorporating the PEDOT:PSS hole transport layer is six times longer than that of the standard PbSe QD device.
An Organic Hole Transport Layer Enhances the Performance of Colloidal PbSe Quantum Dot Photovoltaic Devices
(2010-10-22)
Kuo, Chih-Yin
;
Su, Ming-Shin
;
Hsu, Yu-Chien
;
Lin, Hui-Ni
;
Wei, Kung-Hwa
A thin poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) hole transport layer enhances the AM1.5 power conversion efficiency of a PbSe quantum dot (QD)-containing photovoltaic device to 2.4%, from 1.5% for a standard PbSe QD device, a relative increase of 60%. Synchrotron X-ray reflectivity measurements reveal that the roughness of the interfaces between the various layers decreases dramatically in the presence of the PEDOT: PSS layer. In addition, the device life time under continuous simulated AM1.5 irradiation (100 mW cm(-2)), measured in terms of the time required to reach 80% of the normalized efficiency, for the PbSe QD device incorporating the PEDOT:PSS hole transport layer is six times longer than that of the standard PbSe QD device.
Full-color micro-LED display with high color stability using semipolar (20-21) InGaN LEDs and quantum-dot photoresist
(2020-05-01)
Chen, Sung-Wen Huang
;
Huang, Yu-Ming
;
Singh, Konthoujam James
;
Hsu, Yu-Chien
;
Liou, Fang-Jyun
Red-green-blue (RGB) full-color micro light-emitting diodes (mu-LEDs) fabricated from semipolar (20-21) wafers, with a quantum-dot photoresist color-conversion layer, were demonstrated. The semipolar (20-21) InGaN/GaN mu-LEDs were fabricated on large (4 in.) patterned sapphire substrates by orientation-controlled epitaxy. The semipolar mu-LEDs showed a 3.2 nm peak wavelength shift and a 14.7% efficiency droop under 200 A/cm(2 )injected current density, indicating significant amelioration of the quantum-confined Stark effect. Because of the semipolar mu-LEDs' emission-wavelength stability, the RGB pixel showed little color shift with current density and achieved a wide color gamut (114.4% NTSC space and 85.4% Rec. 2020). (C) 2020 Chinese Laser Press
High-Bandwidth Green Semipolar (20-21) InGaN/GaN Micro Light-Emitting Diodes for Visible Light Communication
(2020-08-19)
Chen, Sung-Wen Huang
;
Huang, Yu-Ming
;
Chang, Yun-Han
;
Lin, Yue
;
Liou, Fang-Jyun
The light-emitting diode (LED) is among promising candidates of light sources in visible light communication (VLC); however, strong internal polarization fields in common c-plane LEDs, especially green LEDs, result in low frequency and limited transmission performance. This study aims to overcome the limited 3-dB bandwidth of long-wavelength InGaN/GaN LEDs. Thus, semipolar (20-21) micro-LEDs (mu LEDs) were fabricated through several improved approaches on epitaxy and chip processes. The mu LED exhibits a 525 nm peak wavelength and good polarization performance. The highest 3-dB bandwidth up to 756 MHz and 1.5 Gbit/s data rate was achieved under a current density of 2.0 kA/cm(2). These results suggest a good transmission capacity of green semipolar (20-21) mu LEDs in VLC applications.