Browsing by Author "Lin, Tzy-Rong"

Now showing 1 - 20 of 23

Characteristic of UV Plasmonic Nanolasers with Different Spacer Thickness
(2016)
Chou, Yu-Hsun
;
Chou, Bo-Tsun
;
Lin, Sheng-Di
;
Lin, Tzy-Rong
;
Lin, Chien-Chung
We report on plasmonic lasers with ZnO nanowire lying on single-crystalline silver film with different SiO2 thickness spacer. Spacer thickness were optimized to adjust the surface plasmon dispersion curve and resulting different group index.
Cladding Effect on Hybrid Plasmonic Nanowire Cavity at Telecommunication Wavelengths
(2013-05-01)
Cheng, Pi-Ju
;
Weng, Chen-Ya
;
Chang, Shu-Wei
;
Lin, Tzy-Rong
;
Tien, Chung-Hao
In this paper, we investigate the effect of cladding layers on a hybrid plasmonic nanowire cavity. A decent confinement factor and moderate modal loss can be achieved for lasing. Within a certain index range of the cladding layer, the fundamental hybrid plasmonic mode is well confined inside the narrow gain region and becomes the most promising lasing mode. Our results also indicate that the mirror loss can be reduced if the refractive index of the cladding layer is properly chosen. An estimated cold-cavity quality factor of 87, corresponding to a threshold gain of about 1072 cm(-1), is achievable at a cavity length of 10.13 mu m for the lasing mode.
Coupled nanowire-based hybrid plasmonic nanocavities on thin substrates
(2014-11-28)
Cheng, Pi-Ju
;
Chiang, Chih-Kai
;
Chung, Yi-Cheng
;
Tien, Chung-Hao
;
Lin, Tzy-Rong
We theoretically analyze nanowire-based hybrid plasmonic nanocavities on thin substrates at visible wavelengths. In the presence of thin suspended substrates, the hybrid plasmonic modes, formed by the coupling between a metal nanowire and a dielectric nanowire with optical gain, exhibit negligible substrate-mediated characteristics and overlap better with the gain region. Consequently, the confinement factor of the guided hybrid modes is enhanced by more than 42%. However, the presence of significant mirror loss remains the main challenge to lasing. By adding silver coatings with a sufficient thickness range on the two end facets, we show that the reflectivity is substantially enhanced to above 50%. For a coating thickness of 50 nm and cavity length of about 4 mu m, the quality factor is above 100.
Full-Spectrum Analysis of Perovskite-Based Surface Plasmon Nanolasers
(2020-03-29)
Cheng, Pi-Ju
;
Zheng, Qi-Yan
;
Hsu, Chu-Yuan
;
Li, Heng
;
Hong, Kuo-Bin
We systematically studied the characteristics of hybrid perovskite-based surface plasmon nanolasers. If one changes the anion composition of perovskites, the emission wavelength can be easily tuned. We conducted in full-spectrum modeling that featured hybrid perovskite nanowires placed on different SiO2-coated metallic (Au, Ag, and Al) plates. The proposed nanocavities that supported plasmonic gap modes exhibited distinguished properties of nanolasers, such as low-transparency threshold-gain and low lasing threshold. The corresponding experimental results for the MAPbBr(3) nanolaser on Ag revealed the low-threshold operation. These superior features were attributed to enhanced light-matter interaction with strong coupling. Therefore, the proposed scheme, integrated with hybrid perovskite as gain material, provides an excellent platform for nanoscale plasmon lasing in the visible to near-infrared spectra.
Graphene-Loaded Plasmonic Zirconium Nitride and Gold Nanogroove Arrays for Surface-Charge Modifications
(2020-06-26)
Yu, Min-Wen
;
Ishii, Satoshi
;
Ku, Ji-Ren
;
Yang, Jhen-Hong
;
Huang, Chih-Hsiang
Graphene-on-metal (G/M) heterostructures have gained considerable attention in recent years owing to their outstanding optical and electrical properties. In this study, the polarity of graphene doping to different metallic materials underneath graphene is analyzed for applications in surface-charge modifications. Kelvin probe force microscopy clearly reveals the charge-transfer effects of plasmonic zirconium nitride (ZrN) and gold (Au) on the formation of G/M heterostructures. In addition, both ZrN and Au nanogroove arrays are fabricated by focused ion beam to generate surface plasmon resonances. The charge-transfer effects influence the effective permittivities of ZrN and Au surfaces such that opposite plasmonic resonance shifts are demonstrated for the ZrN and Au nanogroove arrays. Our results show that the choice of metallic material is important for achieving a desired charge transfer in the loading of graphene onto metallic materials.
High Q/V-m hybrid photonic-plasmonic crystal nanowire cavity at telecommunication wavelengths
(2015-01-01)
Chiang, Chih-Kai
;
Chung, Yi-Cheng
;
Cheng, Pi-Ju
;
Wu, Chien-Wei
;
Chang, Shu-Wei
We haw analyzed a hybrid photonic-plasmonic crystal nanocavity consisting of a silicon grating nanowire adjacent to a metal surface with a gain gap between. The hybrid plasmonic cavity modes are highly confined in the gap due to the coupling of photonic crystal cavity modes and surface plasmonic gap modes. Using the finite-element method, we numerically solve guided modes of the hybrid plasmonic waveguide at a wavelength of 1.55 jim. The modal characteristics such as wave guide confinement factors and modal losses of the fundamental hybrid plasmonic modes are explored as a function of the groove depth at various gap heights. After that, we show the band structure of the hybrid crystal modes, corresponding to a wide band gap of 17.8 THz. To effectively trap the optical modes, we introduce a single defect into the hybrid crystal. At a deep sub-wavelength defect length as small as 180 nm, the resonant mode exhibits a high quality factor of 566.5 and an ultrasmall mode volume of 0.00186 (ln)3 at the resonance wavelength of 1.55 gm. In comparison to the conventional photonic crystal nanowire cavity in the absence of metal surface, the figure of merit QIVm is enormously enhanced around 15 times. The proposed nanocavities open up the opportunities for various applications with strong light-matter interaction such as nanolasers and bio sensors.
High-operation-temperature Aluminum-based SPP Nanolasers
(2016)
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chou, Bo-Tsun
;
Wu, Yen-Mo
;
Shih, Jheng-Hong
Metal-insulator-semiconductor structures has widely adopted in plasmonics lasers. However, we found that the insulator is not necessary if permittivity combination of laser structures is properly designed. Single-mode laser operation was demonstrate in devices without artificial insulator layers. Moreover, the operation temperature can achieve to 353 K.
High-Operation-Temperature Plasmonic Nanolasers on Single-Crystalline Aluminum
(2016-05)
Chou, Yu-Hsun
;
Wu, Yen-Mo
;
Hong, Kuo-Bin
;
Chou, Bo-Tsun
;
Shih, Jheng-Hong
The recent development of plasmonics has overcome the optical diffraction limit and fostered the development of several important components including nanolasers, low-operation-power modulators, and high-speed detectors. In particular, the advent of surface-plasmon-polariton (SPP) nanolasers has enabled the development of coherent emitters approaching the nanoscale. SPP nanolasers widely adopted metal insulator semiconductor structures because the presence of an insulator can prevent large metal loss. However, the insulator is not necessary if permittivity combination of laser structures is properly designed. Here, we experimentally demonstrate a SPP nanolaser with a ZnO nanowire on the as-grown single-crystalline aluminum. The average lasing threshold of this simple structure is 20 MW/cm(2), which is four-times lower than that of structures with additional insulator layers. Furthermore, single-mode laser operation can be sustained at temperatures up to 353 K. Our study represents a major step toward the practical realization of SPP nanolasers.
High-Performance Plasmonic Nanolasers with a Nanotrench Defect Cavity for Sensing Applications
(2018-07-01)
Cheng, Pi-Ju
;
Huang, Zhen-Ting
;
Li, Jhu-Hong
;
Chou, Bo-Tsun
;
Chou, Yu-Hsun
Recent developments in small footprint plasmonic nanolasers show promise for active optical sensing with potential applications in various fields, including real-time and label-free biochemical sensing, and gas detection. In this study, we demonstrate a novel hybrid plasmonic crystal nanolaser that features a ZnO nanowire placed on Al grating surfaces with a nanotrench defect nanocavity. The lasing action of gain-assisted defect nanocavity overcomes the ohmic loss parasitically in the plasmonic nanostructures. Therefore, the plasmonic nanolaser exhibits an extremely small mode volume, a narrow linewidth Delta lambda, and a high Purcell factor that can facilitate the strong interaction between light and matter. This can be used as a refractive index sensor and is highly sensitive to local changes in the refractive indices of ambient materials. By careful design, the near-ultraviolet nanolaser sensors have significant sensing performances of glucose solutions, revealing a high sensitivity of 249 nm/RIU and high resolution, with a figure of merit of 1132, at the resonant wavelength of 373 nm.
Metal for Plasmonic Ultraviolet Laser: Al or Ag?
(2017-11-01)
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chung, Yi-Cheng
;
Chang, Chun-Tse
;
Chou, Bo-Tsun
Surface plasmon polariton (SPP) nanolasers have recently emerged as promising candidates for generating a coherent light source in nanophotonic integration circuits. The properties of SPP nanolasers, such as group velocity, mode area, modulation speed, and threshold performance, can be manipulated using a dispersion relation. In this study, we investigated the characteristics of SPP nanolasers operated near and far from the SP frequency. Our results indicated that SPP nanolaser performance can be significantly influenced by manipulating the dispersion relation.
Plasmonic gap mode nanocavities at telecommunication wavelengths
(2014)
Cheng, Pi-Ju
;
Weng, Chen-Ya
;
Chang, Shu-Wei
;
Lin, Tzy-Rong
;
Tien, Chung-Hao
We analyze a plasmonic gap-mode Fabry-Perot nanocavity containing a metallic nanowire. The proper choice of the cladding layer brings about a decent confinement inside the active region for the fundamental and first-order plasmonic gap modes. We numerically extract the reflectivity of the fundamental and first-order mode and obtain the optical field inside the cavity. We also study the dependence of the reflectivity on the thickness of Ag reflectors and show that a decent reflectivity above 90 % is achievable. For such cavities with a cavity length approaching 1.5 pm, a quality factor near 150 and threshold gain lower than 1500 cm-1 are achievable.
Plasmonic gap-mode nanocavities with metallic mirrors in high-index cladding
(2013-06-03)
Cheng, Pi-Ju
;
Weng, Chen-Ya
;
Chang, Shu-Wei
;
Lin, Tzy-Rong
;
Tien, Chung-Hao
We theoretically analyze plasmonic gap-mode nanocavities covered by a thick cladding layer at telecommunication wavelengths. In the presence of high-index cladding materials such as semiconductors, the first-order hybrid gap mode becomes more promising for lasing than the fundamental one. Still, the significant mirror loss remains the main challenge to lasing. Using silver coatings within a decent thickness range at two end facets, we show that the reflectivity is substantially enhanced above 95 %. At a coating thickness of 50 nm and cavity length of 1.51 mu m, the quality factor is about 150, and the threshold gain is lower than 1500 cm(-1). (C) 2013 Optical Society of America
Plasmonic Nanolasers Enhanced by Hybrid Graphene-Insulator-Metal Structures
(2019-08-01)
Li, Heng
;
Li, Jhu-Hong
;
Hong, Kuo-Bin
;
Yu, Min-Wen
;
Chun, Yi-Cheng
Graphene is a two-dimensional (2D) structure that creates a linear relationship between energy and momentum that not only forms massless Dirac fermions with extremely high group velocity but also exhibits a broadband transmission from 300 to 2500 nm that can be applied to many optoelectronic applications, such as solar cells, light-emitting devices, touchscreens, ultrafast photodetectors, and lasers. Although the plasmonic resonance of graphene occurs in the terahertz band, graphene can be combined with a noble metal to provide a versatile platform for supporting surface plasmon waves. In this study, we propose a hybrid graphene-insulator-metal (GIM) structure that can modulate the surface plasmon polariton (SPP) dispersion characteristics and thus influence the performance of plasmonic nanolasers. Compared with values obtained when graphene is not used on an Al template, the propagation length of SPP waves can be increased 2-fold, and the threshold of nanolasers is reduced by 50% when graphene is incorporated on the template. The GIM structure can be further applied in the future to realize electrical control or electrical injection of plasmonic devices through graphene.
Realization of UV Plasmonic Nanolasers With Extremely Small Mode Volume
(2015-11-01)
Chou, Bo-Tsun
;
Chou, Yu-Hsun
;
Chiang, Chih-Kai
;
Wu, Yen-Mo
;
Lin, Tzy-Rong
It is difficult to operate plasmonic nanolasers on silver films in the ultraviolet regime owing to the bending-back effect of surface plasmon dispersion. In this paper, we report on plasmonic lasers comprised of a ZnO nanowire lying on a single-crystalline silver film with a SiO2 spacer layer. The silver can strongly shrink the mode volume, thereby boosting the Purcell factor. Meanwhile, the SiO2 spacer thickness is optimized to adjust the surface plasmon dispersion curve so that the lasing wavelength can be located at a large dispersion region, thereby achieving a large group index of 55, an ultra-small effective mode volume of 3.5 x 10(-3)lambda(3), and low-threshold of 11 MW/cm(2).
Single-crystalline aluminum film for ultraviolet plasmonic nanolasers
(2016-01-27)
Chou, Bo-Tsun
;
Chou, Yu-Hsun
;
Wu, Yen-Mo
;
Chung, Yi-Cheng
;
Hsueh, Wei-Jen
Significant advances have been made in the development of plasmonic devices in the past decade. Plasmonic nanolasers, which display interesting properties, have come to play an important role in biomedicine, chemical sensors, information technology, and optical integrated circuits. However, nanoscale plasmonic devices, particularly those operating in the ultraviolet regime, are extremely sensitive to the metal and interface quality. Thus, these factors have a significant bearing on the development of ultraviolet plasmonic devices. Here, by addressing these material-related issues, we demonstrate a low-threshold, high-characteristic-temperature metal-oxide-semiconductor ZnO nanolaser that operates at room temperature. The template for the ZnO nanowires consists of a flat single-crystalline Al film grown by molecular beam epitaxy and an ultrasmooth Al2O3 spacer layer synthesized by atomic layer deposition. By effectively reducing the surface plasmon scattering and metal intrinsic absorption losses, the high-quality metal film and the sharp interfaces formed between the layers boost the device performance. This work should pave the way for the use of ultraviolet plasmonic nanolasers and related devices in a wider range of applications.
Structural Colors Enabled by Lattice Resonance on Silicon Nitride Metasurfaces
(2020-05-26)
Yang, Jhen-Hong
;
Babicheva, Viktoriia E.
;
Yu, Min-Wen
;
Lu, Tien-Chang
;
Lin, Tzy-Rong
Artificial color pixels based on dielectric Mie resonators are appealing for scientific research as well as practical design. Vivid colors are imperative for displays and imaging. Dielectric metasurface-based artificial pixels are promising candidates for developing flat, flexible, and/or wearable displays. Considering the application feasibility of artificial color pixels, wide color gamuts are crucial for contemporary display technology. To achieve a wide color gamut, ensuring the purity and efficiency of nanostructure resonance peaks in the visible spectrum is necessary for structural color design. Low-loss dielectric materials are suitable for achieving vivid colors with structural color pixels. However, high-order Mie resonances prevent color pixels based on dielectric metasurfaces from efficiently generating highly saturated colors. In particular, fundamental Mie resonances (electric/magnetic dipole) for red can result in not only a strong resonance peak at 650 nm but also high-order Mie resonances at shorter wavelengths, which reduces the saturation of the target color. To address these problems, we fabricated silicon nitride metasurfaces on quartz substrates and applied Rayleigh anomalies at relatively short wavelengths to successfully suppress high-order Mie resonances, thus creating vivid color pixels. We performed numerical design, semianalytic considerations, and experimental proof-of-concept examinations to demonstrate the performance of the silicon nitride metasurfaces. Apart from traditional metasurface designs that involve transmission and reflection modes, we determined that lateral light incidence on silicon nitride metasurfaces can provide vivid colors through long-range dipole interactions; this can thus extend the applications of such surfaces to eyewear displays and guided-wave illumination techniques.
Study of Plasmonic Nanolasers with Graphene-Metal Interaction
(2019-01-01)
Chung, Yi-Cheng
;
Li, Heng
;
Lu, Tien-Chang
;
Chen, Kuo-Ping
;
Lin, Tzy-Rong
The charge transfer effect of the graphene-oxide-metal interface on the performance of plasmonic nanolasers was investigated. The results show that the variation of electron densities of metals can influence the characteristics of surface-plasmon-polariton modes and lead to a significant improvement in the performance of plasmonic nanolasers.
Surface plasmon polariton nanolasers: Coherent light sources for new applications
(2018-11-01)
Chou, Yu-Hsun
;
Chang, Chia-Jui
;
Lin, Tzy-Rong
;
Lu, Tien-Chang
;
光電工程學系
The invention of the Internet and mobile devices has caused tremendous changes in human lives over the past two decades. Information technology has broken through limitations of geospatial space, enabling extremely high-speed data transmission and new types of data services. In recent years, demands for data processing have shown an increasing trend. Furthermore, data generated from internet-related applications such as cloud services and self-driving technology are likely to grow exponentially over the coming years. Currently, data transmission inside integrated circuits mainly relies on metal wires. However, the substantial resistive-capacitive delay and energy loss that are caused by metal wires limit data transmission speeds. Optical interconnection has been regarded as a major solution to efficiently reduce energy consumption and increase data transmission speeds. The size of conventional semiconductor laser devices, which are the key component in optical interconnection, cannot be smaller than the wavelength of light, which is a fundamental physical obstacle to lasers integrating with current electronic integrated circuits in reasonable volumes. To realize optical interconnection, the volume of the laser device must match the existing electronic components. Recently, the use of diffraction-unlimited plasmonic lasers has been successfully demonstrated, and these have great potential in different applications. In this paper, we discuss the recent progress toward surface plasmon polariton lasers and provide practical insights into the challenges in realizing these novel devices.
Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers
(2017-01-03)
Chung, Yi-Cheng
;
Cheng, Pi-Ju
;
Chou, Yu-Hsun
;
Chou, Bo-Tsun
;
Hong, Kuo-Bin
We systematically investigate the effects of surface roughness on the characteristics of ultraviolet zinc oxide plasmonic nanolasers fabricated on aluminium films with two different degrees of surface roughness. We demonstrate that the effective dielectric functions of aluminium interfaces with distinct roughness can be analysed from reflectivity measurements. By considering the scattering losses, including Rayleigh scattering, electron scattering, and grain boundary scattering, we adopt the modified Drude-Lorentz model to describe the scattering effect caused by surface roughness and obtain the effective dielectric functions of different Al samples. The sample with higher surface roughness induces more electron scattering and light scattering for SPP modes, leading to a higher threshold gain for the plasmonic nanolaser. By considering the pumping efficiency, our theoretical analysis shows that diminishing the detrimental optical losses caused by the roughness of the metallic interface could effectively lower (-33.1%) the pumping threshold of the plasmonic nanolasers, which is consistent with the experimental results.
Tuning the Characteristics of Surface Plasmon Polariton Nanolasers by Tailoring the Dispersion Relation
(2017-01-01)
Lu, Tien-Chang
;
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chung, Yi-Cheng
;
Lin, Tzy-Rong
Nanolasers with ultra-compact footprint are able to provide high intensity coherent light, which have various potential applications in high capacity signal processing, biosensing, and sub-wavelength imaging. Among various nanolasers, those lasers with cavities surrounded with metals have shown to have superior light emission properties due to the surface plasmon effect providing better field confinement capability and allowing exotic light-matter interaction. In this talk, we report robust ultraviolet ZnO nanolaser by using silver (Ag) [1] and aluminum (Al) [2] to strongly shrink the mode volume. The nanolasers operated at room temperature and even high temperature (353K) shows several distinct features including an extremely small mode volume, large Purcell factor and group index. Comparison of characteristics between Ag-and Al-based will also be made.