Browsing by Author "Nien, Yu-Teng"

Now showing 1 - 2 of 2

Methodology of Generating Dual-Cell-Aware Tests
(2017-01-01)
Huang, Yu-Hao
;
Lu, Ching-Ho
;
Wu, Tse-Wei
;
Nien, Yu-Teng
;
Chen, Ying-Yen
This paper introduces a novel fault model, called the dual-cell-aware (DCA) fault model, which targets the short defects locating between two adjacent standard cells placed in the layout. A layout-based methodology is also presented to automatically extract valid DCA faults from targeted designs and cell libraries. The identified DCA faults are outputted in a format that can be applied to a commercial ATPG tool for test generation. The result of ATPG and fault simulation based on industrial designs have demonstrated that the DCA faults cannot be fully covered by the tests of conventional fault models including stuck-at, transition, bridge and cell-aware faults and hence require their own designated tests to detect.
Methodology of Generating Timing-Slack-Based Cell-Aware Tests
(2019-01-01)
Nien, Yu-Teng
;
Wu, Kai-Chiang
;
Lee, Dong-Zhen
;
Chen, Ying-Yen
;
Chen, Po-Lin
In order to reduce DPPM (defect parts per million), cell-aware (CA) methodology was proposed to cover various types of intra-cell defects. The resulting CA faults can be a 1-time-frame (ltf) or 2-time-frame (2tf) fault, and 2tf CA tests were experimentally verified to be capable of catching a significant number of defective parts not covered by other conventional tests. In this paper, we present a novel methodology for generating 2tf CA tests based on timing slack analysis. The proposed 2tf CA fault model, aware of timing slack and named TS, defines a fault (i) on a cell instance basis, and (ii) based on per-instance timing criticality (according to timing slack). More explicitly, for each cell instance with a specific defect injected, we check its output capacitive load and derive the corresponding extra delay. By comparing the extra delay against timing slack of the cell instance, a delay fault can be defined, and according to its severity, the fault can be further classified into small-delay fault or gross-delay fault. In contrast to prior 2tf CA methodology that is on a cell (rather than cell instance) basis and unaware of timing criticality/slack, our methodology can identify "more realistic" faults which really need to be considered, and potentially the cost/effort for testing those 2tf CA faults can be reduced. Experimental results on a set of 28nm industrial designs demonstrate that, due to more realistic fault identification, the numbers of identified small-delay faults and corresponding test patterns to be applied can be reduced by 35.1% and 24.1% respectively, leading to 40.7% reduction in the runtime of ATPG.