DSpace Repository :: Browsing by Issue Date

Item

管管作品兩首

(1976-08-01)

管管

Item

管管作品兩首

(1976-08-01)

管管

Item

管管作品兩首

(1976-08-01)

管管

Item

管管作品兩首

(1976-08-01)

管管

Item

蟋蟀夫婦

(1976-08-17)

管管

Item

為了鳥聲

(1976-08-17)

管管

Item

對面山上的五隻燈

(1976-09-19)

管管

Item

管管作品七首

(1976-10-01)

管管

Item

管管作品七首

(1976-10-01)

管管

Item

管管作品七首

(1976-10-01)

管管

Item

管管作品七首

(1976-10-01)

管管

Item

管管作品七首

(1976-10-01)

管管

Item

多種用途之電子化輸入輸出系統

(1976-12)

朱四明

;

Shy-Ming Ju

本文提供一個由萬用鍵盤，輸入輸出控制單元、及點列掃描輸出裝置構成之多種用途輸入輸出系統，以利點子化之資料登錄、處理、及表報。輸入輸出資料可為中文、外文字母、特殊符號、或三者之混和。輸入時，操作員將中文字依簡單之法則分解成字元序，然後由鍵盤以字元鍵按入；外文字母及特殊符號則直接以符號鍵按入。輸入控制單元對按入之鍵碼採相應之措施，並將字元鍵碼序或符號鍵碼轉換成固定長度之字碼，然後累積於應用程式指定之輸入緩衝區，一俟整行之資料由鍵盤輸入完畢，引起該輸入行動之應用程式即可由輸入緩衝區取得以字碼方式表示之輸入資料也。輸出時，文字及符號資料均由應用程式以字碼之方式置於輸出緩衝區，然後輸出控制單元將之轉換成字形點矩陣，並置放於字形輸出處。此時若輸出工具為逐字式之點陣印刷機或螢幕顯示器，則該字形可立即被印出或顯現。或輸出工具為逐列式之點陣印刷機，則俟整行之字形已全部置放妥當後始成排印出。印出之字體可事先選擇，一行字之大小更可由程式任意放大，並可以直式或橫式印行。字與字間，行與行間之距離亦可由程式任意調整。本系統擬涵蓋之中文字為8,532字，外加256個符號（包括外文字母、阿拉伯數字、標點符號、以及特殊符號等），由於本系統容許操作員由鍵盤造字或設符號，故實際能涵蓋之中文字及符號當不止此數。

Item

哥氏空間上運算子之弱緊緻性

(1976-12)

郭滄海

;

Tsang-Hai Kuo

Weak compactness of operators on Grothenaieck spaces is investigated.If Y is a Banach space satisfying one of the following properties : (a)the unit ball of Y* is weak* sequentially compact;(b) Y=C(K) with K a countably compact scattered space; ( c) Y is an L-space; then every bounded linear operator from a Grothendieck space into Y is weakly compact.

Item

廣義高氏測度之垂直與對等

(1976-12)

韋金昌

;

Kim-Chheng Ouy

Let {Xt|tεT}be a stochastic process defined on a measurable space (Ω,F)Let P and Q be two measures induced by {Xt|tεT}. It is known [3] that if both P and Q are Gaussian, then Pand Q are either perpendicular or equivalent. It will be shown that under certain conditions, such a dichotomy can be extended to the case where P and Q are generalized Gaussian.

Item

新中文字根集合的設計

(1976-12)

杜敏文

;

Min-Wen Du

本文敘述如何設計用以作電算機中文輸入輸出的一組新字根。該組字根設計目標有二。即一，最多只要用四個字根即可單一區分每個中文字。二，使由字根組合出來的字能較為美觀。我們增加了一些新字根，同時使用字根變形的方法以達到這兩個目標。

Item

伯氏曲率張量為零的凱氏複流型

(1976-12)

余文能

;

Wen-Neng Yu

Item

X頻帶雙飄移高低高矽衝渡二極體之準靜態設計規範

(1976-12)

張懋中

;

陳茂傑

;

Mau-Chung Chang

;

Mao-Chieh Chen

A modified quasi-static model is developed to optimize the power efficiency of double-drift X-band Lo-Hi-Lo IMPATT diodes. We take the ionization rates and scattering-limited velocities for electrons and holes to be not equal at an operation temperature of 150 ℃, and let the carriers' ionization coefficient be in the form α=A*exp(-B/E),where E is the electric field.We maintain the carriers' velocities at saturation and solve for a steady state solution. All these assumptions not only save computer time, but also give us essential physical features.Current tuning effect is concluded as the most important factor in designing the device structure.Large signal values of negative conductance, susceptance,r.f. power generation efficiency are calculated as a function of the oscillation voltage amplitude for a specified bias current density. All of these informations would provide a useful guidance for both device and circuit designers.

Item

振盪強度總數之數量關係式

(1976-12)

李維銘

;

Wei-Ming Lee

With the aid of RHF atomic functions numerical evaluations of the oscillator strength sum S(1) for polyelectron atoms He-Xe are performed. Numerical evaluations of S(K) are formidable and those with non-integral K are unable to be evaluated directly. Therefore we also present a qunatitive relation between S(K) and K and numerical results of S(K) at least over a range of K from -2 to 2 both integral or fractional can be easily performed there-from.

Item

最佳連續抽樣法之討論

(1976-12)

戴久永

;

Chiu-Yung Tai

Beattie (1962) proposed a continuous acceptance sampling plan for attributes inspection which seems to appear well-suited and applicable to the situations when production is continuous, sampling test is destructive, a constant sampling rate is required, and discrimination between two quality levels is required with a small sample size. Prairie and Zimmer (1973) presented brief underlying mathematics and provided tables and graphs of the ARL for a variety of plans to aid in the design and evaluation of Beattie's continuous acceptance sampling procedure. However, their approach suffers the restriction that the parameters are integers. In this paper, a method for deriving the non-integer parameters is proposed, we begin by discussing the previously published method.Then we described our new approach . Finally, some tables and graphs are provided for determining a plan along with examples of their use.

Browsing by Issue Date, starting with "1976-08-01"