Browsing by Issue Date, starting with "2005"
Now showing 1 - 20 of 68955
- Results Per Page
- Sort Options
Item type:Item, 資料串流管理系統及串流資料探勘之研發(III)(2005) ;李素瑛 ;LEE SUH-YIN國立交通大學資訊工程學系(所)Item type:Item, 科學概念的建構與重建數位學習研究---數位學習環境中學生科學概念改變之研究(II)(2005) ;佘曉清 ;SHE HSIAO-CHING國立交通大學教育研究所Item type:Item, Terahertz field detection beyond 30 THz by proton-bombarded InP photoconductive antennas(2005) ;Liu, TA ;Tani, M ;Nakajima, M ;Hangyo, MSakai, KWe show that photoconductive antennas fabricated on proton-bombarded InP (InP:H+) substrates with a proton dosage of 1x10(15) ions/cm(2) are promising for THz detection.Item type:Item, 數位儀控系統人因工程技術發展與應用先期研究(2005) ;許尚華 ;Hsu Shiang Hwa國立交通大學工業工程與管理學系主控制室是核電廠的樞紐,主控制室人機介面的設計影響運轉人員的狀況察覺與決策,對於核能營運的安全影響甚鉅。以往的核電廠運轉事件與重要事故多與人機介面的設計有關,傳統儀控系統有上千個儀控設備設置於大型盤面的固定位置,運轉員必需從林林總總的資訊顯示中擷取所需的資訊,並加以整合,方能即時偵測電廠問題,做適當的處置,這種設計加賦予運轉員極大的認知負荷。有鑑於此,儀控系統廠商致力於發展先進型人機介面,利用電腦技術,賦予運轉員介面互動的彈性,提供更多運轉員所需的資訊;透過自動化,協助運轉員操作。此設計之演進不僅能夠精簡控制室的人機介面設備,而且能夠減輕運轉員的負荷、增進運轉效率。 然而,依據一般對複雜系統進行的人因工程研究顯示,先進型儀控系統可能也會產成一些使用上與運作上的問題。在使用方面,人與電腦的互動會產生下列問題:自動化將系統運作內隱化,使得運轉員難以掌握系統狀況,影響了人與自動化的互動;資訊顯示的彈性增加了人機互動操作的複雜度,難以建立使用者的心智模型,而對人機互動沒有足夠的了解,進而對於運轉員主要作業產生干擾;運轉員只能看到部分資訊而鑰匙孔效應。在運作上,電腦儀控系統的團隊操作模式可能有異於傳統儀控系統,而可能影響團隊溝通、團隊狀況察覺;運轉員從使用傳統儀控系統轉移到電腦儀控系統,也產生調適困難的問題。 台電公司興建核四廠,採用先進型儀控系統,為了確保儀控系統的可操作性、核能安全,一方面遵照NRC所要求的人因工程程序(NUREG-0711)和先進型儀控系統介面審查準則(NUREG-0700)督促廠商在儀控系統的開發必須遵循人因工程程序,設計需符合規範,另一方面對於先進型儀控系統可能發生的問題進行探討,提供工作規劃之重要參考。本研究的目的有三:(1)依據NRC NUREG-0711的規範與PSAR的承諾來探討人機介面V&V 本土化人因技術,並提出龍門計畫人機介面V&V計畫可再強化之重點,(2)對於先進型儀控系統人機互動可能發生的人因問題作探討,提出因應建議,和(3)協助舉辦人因工程研討會,以提升國內學術界對龍門計畫儀控系統的了解與接受度。本計劃預訂需時一年。Item type:Item, 四和六層印刷電路板去耦合及電源濾波問題研究(2005) ;吳霖? ;WU LIN-KUN交通大學電信工程系板級電源供應系統的去耦合及電源濾波問題乃高性能數位系統設計和分析上的一 個重要議題;不良的設計可嚴重影響系統的訊號完整性及輻射性電磁干擾性能。對四 和六層印刷電路板而言,間隔較大的電源層與接地層限制了採單貫孔連結方式的去耦 合電容以及電源濾波元件的高頻性能。本計畫的研究目的在於探討如何透過合適的多 貫孔連結方式,或利用於零件層製作的局部性電源層或接地層,來降低晶片電源接腳 與去耦合電容以及電源濾波元件之間的寄生電感以提昇高速/高頻的去耦合及電源濾 波性能。研究結果應可釐清不同設計理念的優缺點。Item type:Item, 赴大陸參訪計畫(2005) ;馮正民 ;Feng Cheng Min交通大學交通運輸研究所Item type:Item, 藍/紫光發光元件磊晶及製程之研究(I)(2005) ;王興宗 ;WANG SHING CHUNG交通大學光電工程研究所Item type:Item, 一個以Pro替代Gly的非典形thioredoxin活性區(2005) ;林苕吟 ;LIN TIAO-YIN國立交通大學生物科技學系(所)屬於thioredoxin 超級家族的氧化還原酵素的活性區含有CXXC 之主題結構。在 thioredoxin 此序列是CGPC,且從大腸桿菌到人類具有高度的保留性。有趣的是在 Arabidopsis thaliana 和Populus trihocarpa cv. Trichobel 所含有的多個thioredoxin h 當中, 竟然有些呈現Gly→Pro 的轉變於第一個X 處。目前對這種蛋白的性質,以及第一個X 位置Gly/Pro 相互轉變之影響的研究,提供了我們相當複雜的功能上之結果。但其機制 原理卻無真正的研究。 任何的氧化還原酵素在執行功能時必須將電子轉移至其標的物。功能上最終結果實 際上是其與標的物間交互作用,以及酵素氧化還原性質的縱合表現。在此計畫中,我們 用大腸桿菌thioredoxin 來探討究竟第一個X 位置Gly 到Pro 的轉換是改變其氧化還原性 質或是其與標的物間的作用,或者兩者皆受影響。我們將用定點突變把此位置由Gly 改 變成Pro,然後純化出突變種及野生種蛋白。接著我們將研究突變種與野生種蛋白的直 接氧化還原平衡,cysteines 的有效濃度,以及用thioredoxin reductase 所催化的蛋白質還 原反應所得的氧化還原電位。由這些可得知突變種與野生種的氧化還原性質有無改變。 我們也將利用數種噬菌體在攜帶突變種及野生種thioredoxin 基因的菌株下的平盤效率 來評估Gly→Pro 替代對於蛋白質間交互作用的影響,如此可排除氧化還原的影響。此 外,我們也將比較突變種與野生種蛋白質在氧化態與還原態下的結構和穩定度。這些研 究將使我們對Gly→Pro 替代的根本效應及為甚麼須要採用非典型的Pro 於CXXC 主題 結構有更深入的瞭解。Item type:Item, On the security of a certified e-mail scheme with temporal authentication(2005) ;Shao, MH ;Zhou, JY ;Wang, GL ;資訊管理與財務金融系 註:原資管所+財金所Department of Information Management and FinanceCertified e-mail is a value-added service for standard e-mail systems, in which the intended recipient gets the mail content if and only if the mail originator receives a non-repudiation evidence that the message has been received by the recipient. As far as security is concerned, fairness is one of the most important requirements. Recently, Galdi and Giordano (2004) presented an optimistic protocol for certified e-mail with temporal authentication. In this paper, we analyze their protocol and demonstrate that it cannot achieve true fairness and has some other weaknesses. We further propose the improvements to avoid those security problems.Item type:Item, 奈米材料於生化分析之應用(I)(2005) ;陳月枝 ;CHEN YU-CHIE交通大學應用化學系奈米材料具有體積小、比表面積大、及易進行化學修飾等優點,因此常被應 用在各個領域的研究。在此為期三年之研究計劃中,我們將發展可親和辨識微生 物以及生化分子的奈米探針,並結合高專一性的質譜法及可快速進行篩選之光譜 法來進行樣品之分析。 計劃的第一年主題為發展可辨認磷酸化分析物之奈米探針,我們將選擇奈米 材料如螢光奈米材料及磁性奈米粒子為製作奈米探針之基材。第二年的主題則著 重於發展可辨認黴菌的奈米探針之製作,我們將把對黴菌具高度專一性之分子修 飾於奈米探針的表面,製成可辨識黴菌孢子之奈米探針,以達到可快速辨識黴菌 及濃縮的目的。而第三年的研究主題則期望能發展一高效率、高通量、且具快速 分析特性的微生物微陣列感測器的方法。Item type:Item, 單晶片系統驗證之核心技術開發-子計畫四:單晶片系統設計流程之實體驗證(I)(2005) ;江蕙如 ;Jiang Iris Hui-Ru交通大學電子工程系Item type:Item, 機械固力學門赴日本歐洲參訪計畫(2005) ;曾錦煥交通大學機械工程系Item type:Item, Microscopic analysis of desired-speed car-following phenomena(2005) ;Cho, Hsun-Jung ;Wu, Yuh-Ting ;運輸與物流管理系 註:原交通所+運管所Department of Transportation and Logistics ManagementA car-following model is proposed in. this paper. The proposed model presents a new concept to describe car-following process. Repulsion and thrust act on a following vehicle, and the following vehicle chooses an appropriate speed under the repulsion and the thrust. Illustrative simulations are presented. The simulation result indicates that the proposed model is reasonable, and it can reflect some traffic flow phenomena, such as local stability, asymptotically stability, closing-in, and shying-away. It is worth mentioning that the proposed model employ driver desired speed as model variable so that the proposed model can explain why drivers keep different speeds or different gaps under the same condition. The proposed microscopic model can be the research basis of macroscopic traffic flow model.Item type:Item, FLASH-TW experiment status report(2005) ;Liu, T. C. ;Chang, F. Y. ;Chen, C. C. ;Chen, C. W.Huang, M. A.FLASH-TW is an experiment to measure the shower lateral and longitudinal profiles. We perform the shower profile measurement by shooting the 1.5 GeV electron beams in NSRRC on targets made of 15 aluminum blocks, each with a thickness of 2.9 cm. A scintillator (Al2O3: Cr)) is placed behind the targets, converting the secondary shower particles into light. The light from the central region of the shower is recorded by a CCD camera while the light from the outer region is monitored by PMTs. The CCD system is successfully implemented in the run 2 and run 3 of experiment FLASH at SLAC. A test run of the current experiment has been conducted in NSRRC in the past June to study the scintillator spectrum. Two more runs are planned from now to the year 2006 to measure the shower lateral and longitudinal profiles.Item type:Item, A 90 dB Omega, 10 Gbps optical receiver in a 0.18 mu m CMOS technology(2005) ;Chen, Wei-Zen ;Lin, Da-Shin ;電子工程學系及電子研究所Department of Electronics Engineering and Institute of ElectronicsA 90 dB Omega optical receiver analog front-end (AFE), including a transimpedance amplifier, an automatic gain control circuit, and a post amplifier, is fabricated using a 0.18 pm CMOS technology. The receiver front-end provides a -3 dB bandwidth of 7.86 GHz and a GBW of 248.5 THz-Omega that exceeds the state of the arts. The photo current received by the receiver AFE is amplified to a differential voltage swing of 900 mVpp when driving 50 Omega output loads. The sensitivity of the optical receiver is -13 dBm at a bit error rate of 10(-12) with a 2(31)-1 PRBS test pattern.Item type:Item, 異己全球化:英國文化政策、酷兒策略,與男女同志劇場)(I)(2005) ;張靄珠 ;Chang Ivy I-Chu交通大學外國語文學系本研究計畫為兩年期的計畫。主要是(1)以英國男女同志劇場為藍本研究全球化資本主義軌跡中,劇場/身體如何以多重模式,帶著情慾論述進行國族、性別、階級越界;(2)英國劇場傳統中的「酷兒性(queerness)」如何經歷文化著根(rooting)、移轉(routing),漂洋過海,由保守的象徵翻轉成基進策略;(3)英國文化政策和劇場生態的交互影響、以及男女同志、再現美學和策略的演變與衍異如何反映表演藝術家沿著「人權酷兒化、國家女性化(queering human rights, feminizing the state)」的軸線,以社會文化實踐來反思、協商同志與國家的關係、同志在公、私領域的公民權,以及同志作為國人(being a national),在國族與居所(habitation)之間日日活出的關係;(4)最後,筆者計畫將這兩年的研究成果,彙總本人過去十年陸續所做之不同地區、族裔的酷兒表演藝術研究,從宏觀的角度探索「酷兒異己全球化」論述與實踐的多種可能性。筆者第一年研究計畫的重點將著重於:英國文化政策與劇場生態的關係,英國同志劇場和酷兒美學的交互影響,以及自五零年代以降之同志再現的轉折,和Gay Sweatshop Company酷兒美學和再現策略之研究。第二年則把重點放在幾個女同志劇場,研究她們的表演美學和再現策略,以及她們的同志運動、婦女運動、邊緣劇團(fringe theater)、少數族裔劇團、工人團體的結盟,以酷兒策略進行性別、種族、階級之越界。Item type:Item, 結構健康診斷及控制研究---大型結構實驗驗証---子計畫:高樓抗風防震系統之研發(II)(2005) ;王彥博 ;WANG YEN-PO交通大學土木工程系抗風設計是超高層大樓結構設計中最關鍵的部分,為能同時滿足結構安全及舒 適性的設計要求,常須採用結構控制技術。過去調諧質塊阻尼系統﹙TMD﹚是最常 用的高樓抗風系統,包括我國高雄東帝士大樓及台北101 大樓均採用主動式或被動 式TMD 系統作為額外的抗風機制。儘管如此,將消防水塔設計成兼具抗風減震功能 之調諧水柱消能系統﹙TLCD﹚近年來有逐漸取代TMD 的趨勢。被動式調諧阻尼系 統的缺點是它只能控制結構的第一振態反應,這對超高層大樓而言可能不足;主動 式調諧阻尼系統雖能控制多重振態的反應,但其系統設計複雜、電力需求及長期維 護等問題,增加許多不確定性,中國大陸南京電視塔主動式調諧阻尼系統的失敗足 為殷鑒。因此,高樓抗風減震設計的策略,應以被動式調諧阻尼系統控制結構之第 一振態反應為主,並配合其他消能裝置分佈於適當位置控制高振態反應。本計畫擬 以三年的時間,進行高樓抗風減震系統之研發。第一年﹙執行中﹚已針對調諧水柱 系統與金屬降伏型消能器的力學特性進行理論與數值分析模式之探討,並進行初步 之元件設計與測試;第二年將利用總計畫所提供的五層樓結構模型,在國家地震工 程研究中心進行減振性能測試;第三年將針對減振系統之元件設計缺失進行改良, 繼續完成元件試驗及振動台試驗,並建立一套最佳化設計流程,以提供未來工程應 用之參考。Item type:Item, Analysis of silicon nanocrystals in silicon-rich SiO2 synthesized by CO2 laser annealing - art. no. 602020(2005) ;Lin, CJ ;Lin, GR ;Chueh, YL ;Chou, LJ光電工程學系The localized synthesis of 4.2-5.6 nm-Si nanocrystals (nc-Si) in Si-rich SiO2 (SRSO) by CO, laser annealing at laser intensity of below ablation-threshold (6 kW/cm(2)) is demonstrated. Since the SRSO exhibits a high absorption coefficient of up to 0.102 cm(-1) at wavelength of 10.6 mu m, a direct-writing CO, laser annealing system with focusing spot 2 size of 0.2 mm(2) is used to locally anneal the SRSO and precipitate the nc-Si. A thermophysical model reveals that the surface temperature of SRSO ranging from 130 degrees C to 3350 degrees C is achieved by varying the laser power densities from 1.5 to 13.5 kW/cm(2). The CO2 laser-ablation-threshold power density is about 6 kW/cm(2). corresponding to the optimized annealing temperature 1285 degrees C at the ablation threshold. The CO2 laser annealing is capable of the precise control on power density and spot size, which benefits from the in-situ and localized annealing temperature control of SRSO film, and also prevents from the eternal damage of the other electronic devices nearby the annealing site. The nc-Si dependent photoluminescence (PL) were observed at 806 nm or longer, whereas the laser-ablation damaged SRSO film exhibits significant blue PL at 410 nm due to the oxygen-related structural defects. The refractive index of the laser-treated SRSO film is increasing from 1.57 to 2.31 as the laser intensity increases from 1.5 to 6.0 kW/cm(2) which is mainly attributed to the increasing density of nc-Si embedded in SRSO. High resolution transmission electron microscopy (HRTEM) analysis reveals that the average size of nc-Si embedded in SRSO film is about 5.3 nm, which correlates well with the theoretical prediction of a corresponding PL at 806 nm. The HRTEM estimated square density of the nc-Si in SRSO film under the laser intensity of 6 kW/cm(2) is about 10(18) cm(-3).Item type:Item, 單晶片系統驗證之核心技術開發-子計畫五:系統晶片布局設計後之驗證與最佳化平台研究(I)(2005) ;李毅郎 ;Li Yih-Lang國立交通大學資訊科學學系(所)Item type:Item, Synthesis and characterization of novel organic/inorganic hybrid polymers containing polyhedral oligosilsesquioxanes(2005-01-01) ;Xu, HY ;Gao, XY ;Guang, SY ;Chang, FZ應用化學系Hybrid polymers, poly(vinyl pyrrolidone-co-isobutyl styryl polyhedral oligomeric silsesquioxanes)s (PVP-POSS) were synthesized by one step polymerization and characterized using GPC and DSC. Addition of POSS significantly increases the Tg of polyvinylpyrrolidone at a fair high POSS content and obtained high molecular weight polymers with very narrow molecular distribution. The POSS content in the resulted hybrids can be controlled by varying the POSS feed ratio.