Browsing by Issue Date, starting with "2010-04-28"
Now showing 1 - 20 of 46345
- Results Per Page
- Sort Options
Item type:Item, Diminished cage effect in solid p-H-2: Infrared spectra of CISCS, CICS, and CISC in an irradiated p-H-2 matrix containing Cl-2 and CS2(2010-04-28) ;Huang, Chiung-Wei ;Lee, Yaw-Chang ;Lee, Yuan-Pern ;應用化學系應用化學系分子科學碩博班Irradiation of a p-H-2 matrix containing Cl-2 and CS2 at 3.3 K with laser emission at 340 nm followed by annealing of the matrix produced main features at 1479.5 and 1480.8 cm(-1). These lines are attributed to v(1) (SCS antisymmetric stretching) mode of ClSCS. Irradiation of the matrix at 355 nm decomposes ClSCS. Products CS (1272.2 and 1271.1 cm(-1)), ClCS (1193.9/1191.9 and 637.5 cm(-1)), and ClSC (1137.0 cm(-1)) were observed upon annealing. The assignments were based on comparison of observed vibrational wavenumbers and C-13- and S-34-isotopic ratios with those predicted with density-functional theories (B3LYP and BPW91/aug-cc-pVTZ). These results demonstrate that the cage effect of solid p-H-2 is diminished so that isolated Cl was produced via photodissociation of Cl-2 in situ and subsequently reacted with CS2 to form ClSCS, but not ClC(=vS)SCl, upon annealing; typically ClC(vS)SCl was produced as the major product on irradiation of noble-gas matrices containing Cl-2 and CS2. Observation of ClSCS but not ClCS2 is consistent with the theoretical prediction that only formation of the former proceeds via a barrierless path. Similarly, upon irradiation of ClSCS at 355 nm, Cl, CS, and CS2 were produced; subsequent annealing of the irradiated matrix produced ClSC and ClCS via barrierless paths. c 2010 American Institute of Physics. [doi: 10.1063/1.3386578]Item type:Item, Diminished cage effect in solid p-H(2): Infrared spectra of CISCS, CICS, and CISC in an irradiated p-H(2) matrix containing Cl(2) and CS(2)(2010-04-28) ;Huang, Chiung-Wei ;Lee, Yaw-Chang ;Lee, Yuan-Pern ;應用化學系應用化學系分子科學碩博班Irradiation of a p-H(2) matrix containing Cl(2) and CS(2) at 3.3 K with laser emission at 340 nm followed by annealing of the matrix produced main features at 1479.5 and 1480.8 cm(-1). These lines are attributed to v(1) (SCS antisymmetric stretching) mode of ClSCS. Irradiation of the matrix at 355 nm decomposes ClSCS. Products CS (1272.2 and 1271.1 cm(-1)), ClCS (1193.9/1191.9 and 637.5 cm(-1)), and ClSC (1137.0 cm(-1)) were observed upon annealing. The assignments were based on comparison of observed vibrational wavenumbers and (13)C- and (34)S-isotopic ratios with those predicted with density-functional theories (B3LYP and BPW91/aug-cc-pVTZ). These results demonstrate that the cage effect of solid p-H(2) is diminished so that isolated Cl was produced via photodissociation of Cl(2) in situ and subsequently reacted with CS(2) to form ClSCS, but not ClC(=vS)SCl, upon annealing; typically ClC(vS)SCl was produced as the major product on irradiation of noble-gas matrices containing Cl(2) and CS(2). Observation of ClSCS but not ClCS(2) is consistent with the theoretical prediction that only formation of the former proceeds via a barrierless path. Similarly, upon irradiation of ClSCS at 355 nm, Cl, CS, and CS(2) were produced; subsequent annealing of the irradiated matrix produced ClSC and ClCS via barrierless paths. c 2010 American Institute of Physics. [doi: 10.1063/1.3386578]Item type:Item, Optical modulation device(2010-04-29) ;Chen, Jye Hong ;Lin, Chun-Ting ;Jiang, Wen-Jr ;Peng, Peng-ChunShih, Po TsungThe present invention discloses an optical modulation device, which comprises an electric signal generator generating an electric signal carrying a data signal; a first sinusoidal signal generator generating a first sinusoidal signal; an optical signal generator generating an input source optical signal; and an optoelectronic modulator(Mach-Zehnder modulator) receiving the input source optical signal, the electric signal and the first sinusoidal signal, biased to modify a transmission performance of the input source optical signal, modulating the input source optical signal with the electric signal and the first sinusoidal signal, and then sending out an output source optical signal carrying the electric signal and the first sinusoidal signal. The present invention realizes frequency multiplication, enables an optical signal to carry vector signals, and promotes the efficiency of broadband systems.Item type:Item, 障害乗越え補助装置(2010-04-30) ;鄭璧瑩黄健寶【課題】乗物本体と、補助機構と、感知駆動装置とを備える障害乗越え補助装置を提供すること。【解決手段】前記補助機構は、前記乗物本体の片側に設けられ、一端にマットを有し、調整動作によって前記マットを前記乗物本体と障害物の間に介在させ、段を分けることにより前記乗物本体が乗り越える前記障害物の段差を減少させる。感知駆動装置は、前記補助機構と結合され、障害物の存在を感知し、前記調整動作を生じさせるために前記補助機構を駆動するか否かを決定する。本発明のメカニズムを利用すると、段を分けることにより障害物の段差を減少でき、乗物本体が段階的に障害物を乗り越えられるようにする。【選択図】図1Item type:Item, Growth of vertically aligned ZnO nanorod arrays as antireflection layer on silicon solar cells(2010-05-01) ;Chen, J. Y. ;Sun, K. W. ;應用化學系Department of Applied ChemistryIn this work we investigated the effects of growth time, spin-coating rates, and solution concentration on the reflection properties of the solution-grown ZnO nanorod arrays. The vertically aligned nanorod arrays were deposited on the surface of the Si solar cells as the antireflection (AR) layer. We found that the nanorod morphology, controlled through synthetic chemistry, has a great effect on the AR layer performance. We also demonstrated that the light harvest efficiency of the solar cells was greatly improved from 10.4% to 12.8% by using the vertically aligned ZnO nanorod arrays as the AR layer on poly-Si solar cells. (C) 2010 Elsevier B.V. All rights reserved.Item type:Item, Cooperative Sensing of Wideband Cognitive Radio: A Multiple-Hypothesis-Testing Approach(2010-05-01) ;Wu, Sau-Hsuan ;Yang, Chao-Yuan ;Huang, D. -H. Tina ;電信工程研究所Institute of Communications EngineeringA low-complexity decision fusion method is proposed for cooperative spectrum sensing (SS) of wideband cognitive radio (CR) using multiple-hypothesis testing. To maintain the quality of SS in multiple channels, performance indices of false-sensing rate and false-ignorance rate are defined for the Benjamini-Hochberg (BH) procedure to control the false-alarm ratio (FAR) and missing ratio (MR) of SS, respectively. Extended from these results, a double BH procedure is further studied in an attempt to simultaneously attain a low FAR and MR. In addition to identifying the availability of channels, a signal strength-estimation scheme that features multiple-hypothesis testing is also proposed to classify the level of the SNR for cooperative SS. Simulation results show that the double BH procedure can suppress both the FAR and the MR at a high SNR while maintaining a considerable FAR in the low-SNR regime. As such, the system can enjoy throughput enhancement by allowing more active cognitive access at a high SNR and still prevent introducing excessive multiple-access interference to the primary users when their SNRs are weak. On the other hand, for SNR classification, simulations also show that the SNR can be classified within one level, plus or minus the true strength with more than a 96% chance. This allows the system to employ more generic protocols such as concurrent transmissions for cognitive access.Item type:Item, 道路角度估測系統及其方法(2010-05-01) ;陳宗麟許齡元一種道路角度估測系統及其方法,其中,該系統包含:一感測模組及一估測計算模組。該感測模組裝設於一移動體上以量測出一組包括一懸掛系統位移量、一側向加速度、一縱向速度及一橫擺角之系統量測參數。而該估測計算模組包括一擴增卡曼濾波器且具有實施一儲存記憶褪去法及一描述移動體動態方程式之功能,並用來接收該組系統量測參數、一組包括一假設傾斜角及一假設坡度角之待估參數,及一組包括一操縱角度、一油門力道值及一煞車力道值之操作參數的輸入,並產生一道路角度資訊。藉此,僅利用較少感測設備達成同時且精確的道路角度變化估測。Item type:Item, 兆赫波分束器裝置(2010-05-01) ;趙如蘋 ;潘犀靈 ;林家任林俊賢本發明揭露一種兆赫波分束器,其用以分束一兆赫波成為多個兆赫波。兆赫波分束器包括液晶相位光柵與電壓控制單元。電壓控制單元耦接液晶相位光柵,且提供一控制電壓來改變液晶相位光柵中的液晶分子的排列,使得兆赫波通過液晶相位光柵而分成多個兆赫波。Item type:Item, The impact of high-frequency characteristics induced by intrinsic parameter fluctuations in nano-MOSFET device and circuit(2010-05-01) ;Han, Ming-Hung ;Li, Yiming ;Hwang, Chih-Hong ;傳播研究所電機工程學系This work estimates the influences of the intrinsic parameter fluctuations consisting of metal gate work-function fluctuation (WKF), process variation effect (PVE) and random dopant fluctuation (RDF) on 16-nm-gate planar metal-oxide-semiconductor field effect transistors (MOSFETs) and circuits by using an experimentally validated three-dimensional device and coupled device-circuit simulations. The dominance fluctuation source in threshold voltage, gate capacitance, cut-off frequency, high-frequency gain, 3 dB bandwidth, unity-gain bandwidth, power, and the power-added efficiency has been found. Similar to the trend of the cut-off frequency, the PVE and RDF dominate both the device and circuits characteristic fluctuations due to the significant gate capacitance fluctuations and the WKF is less important at this simulation scenario. (C) 2010 Elsevier Ltd. All rights reserved.Item type:Item, A NOVEL METHOD FOR HORIZONTAL EYE LINE DETECTION UNDER VARIOUS ENVIRONMENTS(2010-05-01) ;Jing, Min-Quan ;Cheny, Ling-Hwei ;資訊工程學系Department of Computer ScienceThe eye line is defined to be a horizontal line passing the two eyes of a human face. It can be used to help locate the true positions of eyes and face. In this paper, we propose a method to extract the horizontal eye line of a face under various environments. Based on the facts that the eye color is very different from skin color and the gray level variance of an eye is high, some eye-like regions are first located. Then the horizontal eye line is extracted based on the located eye-like regions and some geometric properties in a face. Experimental results are given to show that the proposed method is robust under a wide range of lighting conditions, different poses and races. The detection rate for HHI face database is 95.63%. For Champion face database, the detection rate is 94.27%.Item type:Item, Operation of a Novel Device With Suspended Nanowire Channels(2010-05-01) ;Lin, Horng-Chih ;Kuo, Chia-Hao ;Li, Guan-Jang ;Su, Chun-JungHuang, Tiao-YuanWe investigate the operation of a new device featuring a side-gate scheme and suspended poly-Si nanowire (NW) channels. The fabrication adopted a sidewall-spacer-etching technique to form the poly-Si NW channels. The NW channels were further suspended using a simple wet-etching step. An interesting hysteresis phenomenon is observed in the I-V characteristics. In addition, a steep subthreshold swing (< 60 mV/dec) is also observed in the transfer curves. A scenario is proposed to explain the operation of such a device.Item type:Item, A Short Open-End Slot Antenna With Equivalent Circuit Analysis(2010-05-01) ;Wang, Yu-Shin ;Chung, Shyh-Jong ;電信工程研究所Institute of Communications EngineeringA novel configuration is described for a compact microstripline fed slot antenna which is shorter than one-eighth wavelength at the operating frequency. Antenna size is reduced by placing two matching capacitors at both sides of an electrically small open-end slot, through the use of a wideband antenna equivalent circuit model established by considering the physical geometry. With the proposed antenna configuration, a 2.45 GHz slot antenna is first designed using an open-end slot of size 9 mm by 1.5 mm that is originally resonant at 4.8 GHz in a conventional design. Experimental results correlate well with those of the full-wave simulation and the equivalent circuit calculation, which shows a bandwidth of 109 MHz and peak gain of 1.89 dBi. By using the same slot size, several slot antennas operating at even lower frequencies (1.9, 1.64, 1.57 GHz) are then designed and demonstrated. Nearly omni-directional radiation patterns with peak gains 0 dBi and radiation efficiencies larger than 45% are obtained. Given its simplicity and compactness, the proposed electrically small antenna is feasible for circuit integration and highly promising for wireless mobile devices.Item type:Item, InGaAs submonolayer quantum-dot photonic-crystal LEDs for fiber-optic communications(2010-05-01) ;Yang, Hung-Pin D. ;Yeh, Zao-En ;Lin, Gray ;Kuo, Hao-ChungChi, Jim Y.An InGaAs submonolayer (SML) quantum-dot photonic-crystal light-emitting diode (QD PhC-LED) with for fiber-optic applications is reported. The active region of the device contains three InGaAs SML QD layers. Each of the InGaAs SML QD layers is formed by alternate depositions of InAs (<1 ML) and GaAs. A maximum CW output power of 0.34 mW at 20 mA has been obtained in the 980 nm range. (C) 2010 Elsevier Ltd. All rights reserved.Item type:Item, A class of error-correcting pooling designs over complexes(2010-05-01) ;Huang, Tayuan ;Wang, Kaishun ;Weng, Chih-Wen ;應用數學系Department of Applied MathematicsAs a generalization of d (e) -disjunct matrices and (w,r;d)-cover-free-families, the notion of (s,l) (e) -disjunct matrices is introduced for error-correcting pooling designs over complexes (or set pooling designs). We show that (w,r,d)-cover-free-families form a class of (s,l) (e) -disjunct matrices. Moreover, a decoding algorithm for pooling designs based on (s,l) (e) -disjunct matrices is considered.Item type:Item, A process for high yield and high performance carbon nanotube field effect transistors(2010-05-01) ;Lee, Tseng-Chin ;Tsui, Bing-Yue ;Tzeng, Pei-Jer ;Wang, Ching-ChiunTsai, Ming-JinnCarbon nanotube field effect transistors (CNTFETs) have been considered as one of the potential candidates for nanoelectronics beyond Si CMOS. However, it is not easy to have high performance CNTFETs with high yield currently. In this work, we proposed a local bottom-gate (LBG) CNTFETs combined with a novel device concept and optimized process technologies. High performance of CNTFET with low subthreshold swing of 139 mV/dec, high transconductance of 1.27 mu S, and high I(on)/I(off) ratio of 10(6) can be easily obtained with Ti source/drain contact after a post annealing process. Record high yield of 74% has been demonstrated. On the basis of the proposed process, lots of high performance CNTFETs can be obtained easily for advanced study on the electrical characteristics of CNTFETs in the future. (C) 2010 Elsevier Ltd. All rights reserved.Item type:Item, 揚聲器診斷系統及其製作方法(2010-05-01) ;白明憲 ;黃兆民陳榮亮本發明係關於一個揚聲器診斷系統及其製作方法。揚聲器工作在大訊號的情況下,許多揚聲器的非線性效應便會顯現,非線性效應會造成聲音的失真(distortion),破壞其音質。本發明之揚聲器診斷系統利用類神經網路架構(neutral fuzzy system)製作專門用於揚聲器缺陷診斷的專家系統,針對不同的失真型態,可以診斷出造成失真的來源並提供改善建議。Item type:Item, A Network-based Simulation Architecture for Studying Epidemic Dynamics(2010-05-01) ;Huang, Chung-Yuan ;Tsai, Yu-Shiuan ;Wen, Tzai-Hung ;資訊工程學系Department of Computer ScienceEpidemiology instructors are collaborating with computer scientists to construct network-based simulations to recreate infectious disease transmission dynamics and to examine intervention strategy efficacies. Here we propose an architecture based on demographic and geographic properties to support the learning efforts of undergraduate students and novice researchers, and describe our simulations of HIV, SARS, and influenza transmission dynamics in Taiwan. Our findings are offered to support the construction of new network-based epidemic simulations.Item type:Item, Continuous slip-ring SPECT acquisition with a five-sphere phantom and arbitrary time-frame shifting reconstruction to simulate a dynamic drug challenge study(2010-05-01) ;Kao, Pan-Fu ;Shiu, Ruei-Lin ;Lee, Jia-Hung ;Chou, Yu-Hsiang資訊工程學系Item type:Item, 光調變裝置(2010-05-01) ;陳智弘 ;林俊廷 ;江文智 ;彭朋群施伯宗本發明係揭露一種光調變裝置,包含一電訊號產生器,其係產生一載有資料訊號之一電訊號,另一第一弦波訊號產生器用來產生一第一弦波訊號,輸入光源訊號則由一光訊號產生器產生,光電調變器(Mach-Zehnder modulator)在接收輸入光源訊號、電訊號與第一弦波訊號後,可對光電調變器進行偏壓,以影響輸入光源訊號的傳輸特性,並使該輸入光源訊號經由電訊號與第一弦波訊號調變後,輸出載有電訊號與第一弦波訊號之輸出光源訊號。本發明不但具倍頻功能又可傳輸向量訊號,能進而有效提升頻寬使用效率。Item type:Item, A Power-Efficient Bio-Potential Acquisition Device with DS-MDE Sensors for Long-Term Healthcare Monitoring Applications(2010-05-01) ;Chang, Chia-Lin ;Chang, Chih-Wei ;Huang, Hong-Yi ;Hsu, Chen-MingHuang, Chia-HsuanThis work describes a power-efficient bio-potential acquisition device for long-term healthcare applications that is implemented using novel microelectromechanical dry electrodes (MDE) and a low power bio-potential processing chip. Using micromachining technology, an attempt is also made to enhance the sensing reliability and stability by fabricating a diamond-shaped MDE (DS-MDE) that has a satisfactory self-stability capability and superior electric conductivity when attached onto skin without any extra skin tissue injury technology. To acquire differential bio-potentials such as ECG signals, the proposed processing chip fabricated in a standard CMOS process has a high common mode rejection ratio (C. M. R. R.) differential amplifier and a 12-bit analog-to-digital converter (ADC). Use of the proposed system and integrate simple peripheral commercial devices can obtain the ECG signal efficiently without additional skin tissue injury and ensure continuous monitoring more than 70 hours with a 400 mAh battery.