<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css"> Skip to main content

A Novel Miniature Thermomagnetic Energy Harvester

dc.citation.volume9057en_US
dc.contributor.authorChen, Chin-Chungen_US
dc.contributor.authorChung, Tien-Kanen_US
dc.contributor.authorCheng, Chi-Chengen_US
dc.contributor.authorTseng, Chia-Yuanen_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.date.accessioned2014-12-08T15:36:26Z
dc.date.available2014-12-08T15:36:26Z
dc.date.issued2014en_US
dc.description.abstractNowadays, thermal-energy-harvesting is an important research topic for powering wireless sensors. Among numerous thermal-energy-harvesting approaches, some researchers demonstrated novel thermomagnetic-energy harvesters to convert a thermal-energy from an ambient temperature-difference to an electrical-output to power the sensors. However, the harvesters are too bulky to be integrated with the sensors embedded in tiny mechanical-structures for some structural-health-monitoring applications. Therefore, miniaturized harvesters are needed. Hence, we demonstrate a miniature thermomagnetic-energy harvester. The harvester consists of CuBe-beams, PZT-piezoelectric-sheet, Gd-soft-magnet, NdFeB-hard-magnet, and mechanical-frame. The piezoelectric-sheet and soft-magnet is bounded at fixed-end and free-end of the beams, respectively. The mechanical-frame assembles the beams and hard-magnet. The lengthxwidthxthickness of the harvester is 2.5cmx1.7cmx1.5cm. According to this, our harvester is 20-times smaller than the other harvesters. In the initial-state of the energy-harvesting, the beams\' free-end is near the cold-side. Thus, the soft-magnet is cooled lower than its curie temperature (Tc) and consequently changed from paramagnetic to ferromagnetic. Therefore, a magnetic-attractive force is produced between the soft-magnet and hard-magnet. Consequently, the beams/soft-magnet are down-pulled toward the hard-magnet fixed on the hot-side. The soft-magnet closing to the hot-side is heated higher than its Tc and subsequently changed to paramagnetic. Consequently, the magnetic-force is eliminated thus the beams are rebounded to the initial-state. Hence, when the harvester is under a temperature-difference, the beams\' pulling-down/back process is cyclic. Due to the piezoelectric effect, the piezoelectric-sheet fixed on the beams continuously produces voltage-response. Under the temperature-difference of 29 C, the voltage-response of the harvester is 30.4 mV with an oscillating-frequency of 0.098 Hz.en_US
dc.identifier.doi10.1117/12.2045294en_US
dc.identifier.isbn978-0-8194-9983-7en_US
dc.identifier.issn0277-786Xen_US
dc.identifier.journalACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2014en_US
dc.identifier.urihttp://dx.doi.org/10.1117/12.2045294en_US
dc.identifier.urihttps://ir.lib.nycu.edu.tw/handle/11536/24774
dc.identifier.wosnumberWOS:000339374200031
dc.language.isoen_USen_US
dc.subjectEnergy Harvesteren_US
dc.subjectPower Generatoren_US
dc.subjectThermalen_US
dc.subjectMagneticen_US
dc.subjectPiezoelectricen_US
dc.titleA Novel Miniature Thermomagnetic Energy Harvesteren_US
dc.typeProceedings Paperen_US

Files

Original bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
000339374200031.pdf
Size:
671.95 KB
Format:
Adobe Portable Document Format

License bundle

Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed to upon submission
Description: