1. 目前位置：
劉增豐

劉增豐 Liu, Tzeng-Feng

電子郵件／E-mail：tfliu@cc.nctu.edu.tw

服務單位／Department：工學院 ／ 材料科學與工程學系奈米科技碩博班

著作期間／Publish Period：1986 - 2014-08-14

著作統計／Statistics

Article（79）
Patents（12）
Plan（36）
Proceedings Paper（4）
Thesis（110）

Article

序號
No.		 標題
Title		 著作日期
Date
1 Conducting Ag/oligothiophene complex pastes through a simple quenching/chelation method
 2014-08-14
2 Effect of polyimide baking on bump resistance in flip-chip solder joints
 2014-03-01
3 Deformation mechanisms in ultrahigh-strength and high-ductility nanostructured FeMnAlC alloy
 2014-02-15
4 Structure and properties of gas-nitrided nanostructured FeAlMnC alloy
 2013-12-16
5 Effect of ECAE on Microstructures and Mechanical Properties of Solution Heat Treated Mg-5(mass%) Sn Alloy
 2013-08-01
6 Effect of Temperature and Extrusion Pass on the Consolidation of Magnesium Powders Using Equal Channel Angular Extrusion
 2013-05-01
7 Enhanced ductility of the ZA85 magnesium alloy fabricated by equal-channel angular pressing
 2013-04-15
8 A novel high-strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy
 2013-03-01
9 Facile preparation of sol-gel-derived ultrathin and high-dielectric zirconia films for capacitor devices
 2012-10-01
10 Effects of equal channel angular extrusion on the microstructure and high-temperature mechanical properties of ZA85 magnesium alloy
 2012-07-01
11 Influence of microstructure and its evolution on the mechanical behavior of modified MAR-M247 fine-grain superalloys at 871 degrees C
 2012-03-30
12 Effect of compressive stress on nickel-induced lateral crystallization of amorphous silicon thin films
 2012-01-31
13 Influence of Rhenium on the Grain Boundary Strength, Phase Evolution, and High Temperature Mechanical Properties of a Fine-Grain Nickel-Base Superalloy at 982 degrees C
 2011-10-01
14 Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys
 2011-03-01
15 Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevated Temperatures
 2011-02-01
16 A New Austenitic FeMnAlCrC Alloy with High-Strength, High-Ductility, and Moderate Corrosion Resistance
 2010-12-01
17 Fabrication of bismuth oxide-tin oxide nanowires by direct thermal oxidation of Bi-Sn eutectic nanowires
 2010-11-30
18 The Size Effect on Solidification in Eutectic Bismuth-Tin (Bi-Sn) Nanowires by In-Situ Annealing Processes 2010-10-01
19 Effects of direct current and pulse-reverse copper plating incubation behavior of self-annealing
 2010-10-01
20 Phase Separation from L2(1) to (B2+L2(1)) in Fe-24.6Al-7.5Ti Alloy
 2010-10-01
21 Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy
 2010-07-01
22 Relationship between Microstructures and Tensile Properties of an Fe-30Mn-8.5Al-2.0C Alloy
 2010-06-01
23 Formation of Hagg Carbide in an Fe-30Mn-10Al-4Cr-0.45C Alloy
 2010-06-01
24 Effects of Rhenium on Microstructure and Phase Stability of MAR-M247 Ni-Base Fine-Grain Superalloy
 2010-04-01
25 Mechanism of Aluminum Induced Lateral Crystallization of Amorphous Silicon
 2010-01-01
26 DNA Mismatch Detection by Metal Ion Enhanced Impedance Analysis
 2009-10-01
27 Corrosion behaviors of austenitic Fe-30Mn-7Al-xCr-1C alloys in 3.5% NaCl solution
 2009-04-15
28 Room temperature negative differential resistance in DNA-based molecular devices
 2009-01-26
29 Fabrication and characterization of eutectic gold-silicon (Au-Si) nanowires
 2008-09-12
30 Ni(2+) doping DNA: a semiconducting biopolymer 2008-09-03
31 Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy
 2008-07-01
32 Relational analysis between parameters and defects for electron beam welding of AZ-series magnesium alloys
 2008-06-19
33 Microstructure and properties of Pb nanowires fabricated by casting
 2008-06-01
34 Optimal parameters for low and high voltage electron beam welding of AZ series magnesium alloys and mechanism of weld shape and pore formation 2008-03-01
35 The effect of hot-dipped aluminum coatings on Fe-8Al-30Mn-0.8C alloy
 2008-02-01
36 Phase transitions in an Fe-9Al-30Mn-2.0C alloy
 2007-11-01
37 Formation of (B2+D0(3))phases at al2(100) anti-phase boundary in an Fe-23 at.%Al-8.5 at.%Ti alloy
 2007-11-01
38 Effect of chromium content on corrosion Behaviors of Fe-9Al-30Mn-(3,5,6.5,8)Cr-1C alloys
 2007-11-01
39 Formation of (B2+D0(3)) two-phase microstructure in a Fe-23 Al-7 Ti alloy
 2007-11-01
40 Orientation relationship between C14 precipitate and (A2+D0(3)) matrix in an Fe-20at.%Al-8at.%Ti alloy
 2007-07-01
41 Aluminum element effect for electron beam welding of similar and dissimilar magnesium-aluminum-zinc alloys
 2007-05-01
42 Fluorescence dynamics of zinc protoporphyrin in solution and inside anodized aluminum oxide (AAO) nano-channel arrays 2006-12-01
43 A study of weldability and fracture modes in electron beam weldments of AZ series magnesium alloys
 2006-11-05
44 As-quenched microstructures of Cu3-XMnxAl alloys
 2006-08-01
45 Phase transformations in a Cu-35 at.% Mn-25 at.% Al alloy
 2006-06-29
46 Phase transformations in a Cu-25at.%Al-7.5at.%Mn alloy
 2006-03-01
47 Aggregation of zinc protoporphyrin in anodized aluminum oxide (AAO) nanoporous environments 2006-02-01
48 The influence of Cr alloying on microstructures of Fe-Al-Mn-Cr alloys
 2004-06-01
49 Phase transition in a Cu-14.1A1-9.0Ni alloy
 2003-08-15
50 Phase transformations in a Cu-14.2Al-7.8Ni alloy
 2003-03-01
51 Phase transformations in a Cu-142Al-15.0Ni alloy
 2003-02-17
52 Phase transformations in a Cu-14.2Al-12.0Ni alloy
 2002-10-11
53 As-quenched microstructure of a Cu-14.6Al-4.3Ni alloy
 2001-04-02
54 Phase transformations in an Fe-8Al-30Mn-1.5Si-1.5C alloy
 2001-03-01
55 Phase transformations in an Fe-8Al-10Ni-2C alloy
 2001-02-02
56 As-quenched microstructures of Cu-14.2Al-xNi alloys
 2000-11-27
57 Suppression of boron penetration for p(+) stacked poly-Si gates by using inductively coupled N-2 plasma treatment
 1999-10-01
58 Orientation relationship between beta-Mn and L2(1) matrix in a Cu2MnAl alloy
 1999-07-01
59 Grain boundary precipitation reactions in a wrought Fe-8Al-5Ni-2C alloy prepared by the conventional ingot process
 1998-02-01
60 The AS-quenched microstructures of Fe-9Al-30Mn-1.2C-xSi alloys
 1997-04-15
61 Grain boundary precipitation behaviors in an Fe-9.8Al-28.6Mn-0.8Si-1.0C alloy
 1996-01-01
62 As-quenched microstructure of a Cu-24.8Mn-30.0Al alloy
 1996-01-01
63 L-J PHASE IN A CU2.2MN0.8AL ALLOY 1995-06-01
64 2H PHASE IN A CU2MNAL ALLOY 1994-09-15
65 PHASE-TRANSFORMATIONS IN AN FE-7.8AL-29.5MN-1.5SI-1.05C ALLOY 1993-09-01
66 SPINODAL DECOMPOSITION IN FE-9.0AL-30.5MN-XC ALLOYS 1993-09-01
67 GRAIN-BOUNDARY PRECIPITATION IN AN FE-8.0AL-31.5MN-1.05C ALLOY 1993-01-15
68 GRAIN-BOUNDARY PRECIPITATION IN AN FE-7.8AL-31.7MN-0.54C ALLOY 1993-01-01
69 AS-QUENCHED MICROSTRUCTURE OF A CU-32MN-25AL ALLOY 1992-05-15
70 PHASE-TRANSITION IN AN FE-23.2AL-4.1NI ALLOY 1992-05-01
71 PHASE-TRANSFORMATION IN AN FE-10.1AL-28.6MN-O.46C ALLOY 1991-10-01
72 GRAIN-BOUNDARY PRECIPITATION IN AN FE-28.6MN-9.8AL-0.8SI-1.0C ALLOY 1991-07-01
73 PHASE-TRANSFORMATION IN AN FE-9.0AL-29.5MN-1.2SI ALLOY 1991-06-01
74 A NEW PHASE IN AN FE-9.0AL-29.5MN-1.2SI ALLOY 1991-06-01
75 EFFECT OF SI ADDITION ON THE MICROSTRUCTURE OF AN FE-8.0AL-29.0MN-0.90C ALLOY 1990-07-01
76 ORIENTATION RELATIONSHIPS AMONG M23C6, M6C, AND AUSTENITE IN AN FE-MN-AL-MO-C ALLOY 1990-03-01
77 THE ORIENTATION RELATIONSHIP BETWEEN A13 BETA-MN AND FERRITE 1989-08-01
78 BETA-MN STRUCTURE IN AN FE-AL-MN-CR ALLOY 1989-07-01
79 MORPHOLOGY OF A12-ALPHA-MN STRUCTURE 1987-09-01

Patents

序號
No.		 標題
Title		 著作日期
Date
1 高強度、高延展性以及高耐腐蝕性鐵錳鋁碳合金之成份設計及其處理方法
 2013-04-01
2 LOW-DENSITY HIGH-TOUGHNESS ALLOY AND THE FABRICATION METHOD THEREOF
 2011-03-17
3 低密度高強度高韌性合金材料
 2010-03-11
4 Low-density high-toughness alloy and the fabrication method thereof
 2010-01-07
5 低密度合金材料及其製法
 2009-11-01
6 Low-density alloy and fabrication method thereof
 2008-09-18
7 低密度合金材料及其製法
 2008-03-01
8 低密度高強度高韌性合金材料及其製法
 2007-09-16
9 High strength and high toughness alloy with low density and the method of making
 2007-09-13
10 低密度高韌性合金材料及其製法
 2007-04-21
11 Low-density high-toughness alloy and the fabrication method thereof
 2007-04-19
12 低密度高韌性合金材料及其製法
 2007-04-16

Plan

序號
No.		 標題
Title		 著作日期
Date
1 史賓諾多新沃斯田鐵型鐵錳鋁碳合金之軋板和鑄件氮化處理、相變化、機械性質與抗腐蝕性研究 2014
2 史賓諾多新沃斯田鐵型鐵錳鋁碳和鐵錳鋁鉻碳合金之相變化、機械性質與抗腐蝕性質研究 2013
3 史賓諾多新沃斯田鐵型鐵錳鋁碳和鐵錳鋁鉻碳合金之相變化、機械性質與抗腐蝕性質研究 2012
4 史賓諾多新沃斯田鐵型鐵錳鋁碳和鐵錳鋁鉻碳合金之相變化、機械性質與抗腐蝕性質研究 2011
5 鐵-鋁-鈦合金相變化
 2010
6 高強度高韌性壓鑄機活動曲臂鋼環研製 2010
7 鐵-鋁-鈦合金相變化
 2009
8 合金元素對高比強度、高延展性之低密度鐵鋁錳基不銹鋼的相變化、機械性質及腐蝕行為的影響之研究 2008
9 鐵-鋁-鈦合金相變化
 2008
10 合金元素對高比強度、高延展性之低密度鐵鋁錳基不銹鋼的相變化、機械性質及腐蝕行為的影響之研究 2007
11 合金元素對高比強度、高延展性之低密度鐵鋁錳基不銹鋼的相變化、機械性質及腐蝕行為的影響之研究 2006
12 鐵-鋁-錳-鉻-(鉬)-碳合金相變化及機械性質研究
 2005
13 銅-(錳、鎳)-鋁合金相變化(II)
 2004
14 鐵鋁錳鉻矽(碳)合金相變化
 2004
15 運用光電技術於工程監控技術人才培育計畫(III) 2003
16 銅-(錳、鎳)-鋁合金相變化(I)
 2003
17 鐵-鋁-錳(鎳)-碳-(矽、鈦、鈮、釩)合金相變化(II)
 2003
18 鐵-鋁-錳(鎳)-碳-(矽,鈦,鈮,釩)合金相變化(I)
 2002
19 運用光電技術於工程監控技術人才培育計畫(II) 2002
20 銅-錳-鋁和銅-鎳-鋁合金相變化
 2001
21 運用光電技術於工程監控技術人才培育計畫(I) 2001
22 鐵鋁錳(鎳)碳合金相變化
 2001
23 銅-(錳、鎳)-鋁合金相變化 2000
24 銅-（錳、鎳）-鋁合金相變化 2000
25 鐵鋁錳碳合金相變化 2000
26 高強度高韌性鐵鋁錳合金鋼民生用品研製(III) 2000
27 銅-(錳、鎳)-鋁合金相變化
 1999
28 銅錳鋁及銅鋁鎳合金相變化 1998
29 鐵鋁錳合金研究---總計畫及子計畫七：鐵鋁錳合金相變化與銲接性質研究 1996
30 銅鋁錳和銅鋁鎳合金相變化 1996
31 鐵鋁錳合金相變化與機械性質 1995
32 銅-鋁-(錳,鎳)和鐵-鋁-(錳,鎳)合金相變態研究 1995
33 鐵鋁錳碳(矽、鎳、鈷)合金相變化 1994
34 錳和鎳元素的添加對銅鋁和鐵鋁二元合金相變化的影響 1994
35 銅鋁錳,銅鋁鎳和鐵鋁鎳合金相變化 1993
36 鐵鋁錳合金研究發展 1993

Proceedings Paper

序號
No.		 標題
Title		 著作日期
Date
1 Self-cleaning characteristics on a thin-film surface with nanotube arrays of anodic titanium oxide
 2008-08-01
2 A study on fabrication, morphological and optical properties of lead sulfide nanocrystals 2008-02-01
3 Growth and characteristics of lead sulfide nanocrystals produced by the porous alumina membrane
 2007-11-15
4 Self-aligned platinum-silicide nanowires for biomolecule sensing
 2005-11-01

Thesis

序號
No.		 標題
Title		 著作日期
Date
1 鐵-9鋁-30錳-(1.0~1.3)碳合金於熱滾軋狀態下之顯微結構與其機械性質之研究 2013
2 離子氮化及氣體氮化對鐵鋁錳碳合金顯微結構、機械性質及抗腐蝕性質影響之研究
 2013
3 史賓諾多型鐵鋁錳碳合金之顯微結構,機械性質與變形機構 2013
4 鎂-2、5、8(wt.%)錫合金經等通道轉角擠型後 其顯微組織暨室溫與高溫機械性質之研究
 2013
5 等通道轉角擠型製程對ZA85鎂合金之顯微組織與機械性質改善之研究
 2013
6 鐵-9wt.%鋁-30wt.%錳-1.3wt.%碳合金於熱軋延狀態 之高溫下機械性質與其顯微結構之研究 2013
7 鐵-9wt.%鋁-28wt.%錳-1.8wt.%碳合金顯微結構、機械性質及抗腐蝕性質研究
 2013
8 等通道轉角擠型製程對鎂-5錫-1鈣合金抗潛變性質的影響
 2012
9 氣體氮化與氣體滲碳氮化對鐵-8.8鋁-30.1錳-1.73碳合金腐蝕與機械性質影響 2012
10 錸元素添加對鎳基Mar-M247超合金顯微組織及機械性能之影響
 2011
11 離子氮化之壓力對鐵-9鋁-30錳-1.8碳合金腐蝕與機械性質影響
 2011
12 等通道轉角擠型製程參數對鎂粉固化塊材顯微組織與機械性質之影響 2011
13 Corrosion and Mechanical Properties of Plasma Nitrided Fe-30 Mn-9 Al-1.8 C Alloy 2011
14 鐵-鋁-鈦和鐵-鋁-錳合金相變化,機械性質及耐腐蝕研究
 2010
15 錫鉍共晶奈米線材之製備、生成機制與應用
 2010
16 ZA85 鎂合金經等通道轉角擠型後抗潛變性質的研究 2010
17 鐵錳鋁鉻碳合金相變化與抗腐蝕
 2009
18 溶膠凝膠法製備InGaZnO4透明導電薄膜的光電性質研究 2009
19 高導熱鋁基複合材料(Gr/A356)之擠壓鑄造製程與性質研究
 2009
20 奈米尺度下Bi-Sn共晶合金之凝固機制探討
 2009
21 鐵-9鋁-30錳-6鉻-1.8碳合金之顯微結構與抗腐蝕性質 2009
22 鎳離子螯合去氧核醣核酸之電性研究及其應用
 2009
23 壓應力對鎳片在非晶矽薄膜誘發側向結晶之影響
 2008
24 鐵-9鋁-30錳-2碳合金之顯微結構與機械性質
 2008
25 ZA85鎂合金經等通道轉角擠型後顯微組織與機械性質改善之研究
 2008
26 銀蒸鍍於不同基板之表面形貌對表面增強拉曼散射效應的影響
 2008
27 多壁奈米碳管/導電型碳黑應用於複合型導電高分子之電性研究
 2007
28 利用壓鑄法製作Bi0.5Sb1.5Te3熱電材料奈米線
 2007
29 鎳矽化合物誘發多晶矽薄膜側向結晶及其顯微結構觀察
 2007
30 利用銦-錫氧化物(ITO)廢料回收高純度銦材
 2007
31 多孔性氧化鋁薄膜之發光性質研究及其在光學上應用
 2007
32 鐵鋁鈦合金相變化
 2007
33 氧化鋁與氧化鈦奈米管的製作與應用研究
 2007
34 鐵-9鋁-30錳-1碳合金衝擊性質與變形微結構之研究
 2007
35 結合超薄場效電晶體與微流道之腺嘌呤核苷三磷酸偵測系統研究 2007
36 鎂鋁基合金之電子束銲接研究
 2006
37 鐵-9鋁-30錳-2.5鉻-0.6碳合金之相變化
 2006
38 三點彎曲方式量測陽極氧化鋁模板機械性質與破斷面分析之研究
 2006
39 以鋁誘導非晶矽低溫結晶及側向結晶之研究
 2006
40 鐵-30錳-8.5鋁-5鈦-1碳合金相變化
 2006
41 銀誘發非晶矽形成低溫多晶矽薄膜之研究
 2006
42 鐵鋁錳合金之相變化及機械性質
 2006
43 運用溶膠－凝膠法技術製作金屬氧化物奈米結晶粒於快閃記憶體元件之研究
 2006
44 鐵-18 at.%鋁-10 at.%鈦合金之相變化
 2006
45 建築基地最小開發規模限制對都市景觀影響之研究---以新竹縣治區開發案件為例
 2005
46 錳含量對銅錳鋁合金相變化之影響
 2005
47 碳含量對鐵-8.8鋁-30錳-4鉻-碳合金顯微結構與孔蝕之影響
 2005
48 生物分子於矽基礎結構之選擇性組裝
 2005
49 氧化鋅薄膜之顯微結構及物性與電性研究
 2005
50 陽極氧化鋁模板自組裝金屬氧化物奈米點陣列
 2005
51 矽化金奈米線生化感測器於蛋白質之檢測應用
 2005
52 鋯鈦酸鉛薄膜之微波水熱式退火並應用於感測器
 2005
53 Cu2.9Mn0.1Al合金相變化
 2005
54 鐵-9鋁-30錳-1.6碳合金顯微結構與機械性質
 2004
55 As-quenched Microstructures of Cu3-xMnxAl (x=0.1, 0.2, 0.3, 0.4) Alloys.
 2004
56 鋁及鉻含量對鐵錳鋁鉻碳合金腐蝕及機械性質之影響
 2004
57 金奈米電極核酸感測器之製造與電性量測研究 2004
58 鉑矽化物奈米線生物感測器之製造與應用研究
 2004
59 溶膠-凝膠法製備二氧化鋯薄膜之物性和電性研究 2004
60 Cu2.8Mn0.2Al 合金之相變化
 2003
61 熱處理對鐵-9鋁-30錳-1碳合金機械性質影響
 2003
62 鐵-8.8鋁-30錳-6鉻-1.0矽-1.0碳合金之相變化
 2003
63 熱浸鍍鋁鐵鋁錳碳合金之研究 2002
64 鐵-9鋁-30錳-5鉻-1.2矽合金之相變化 2002
65 鐵-9鋁-30錳-(1,2)鈦-1碳合金相變化 2002
66 退火熱處理對熱浸鍍鋁鐵鋁錳碳合金鍍層的影響之研究 2002
67 營建工程自動化與視覺化估算系統之需求分析研究—以鋼筋混凝土結構為例 2002
68 氯化鈉溶液中鐵錳鋁鉻鉬合金之電化學腐蝕性質及其鈍化膜研究 2001
69 銅-17.0鋁-10.0鎳合金相變化 2001
70 鐵-8.0鋁-28.5錳-(5,10)鉻合金相變化 2001
71 鎳含量對銅鋁鎳合金相變化之影響 2001
72 營建企業供應鏈體系電子化資訊技術應用調查與分析 2001
73 銅-13.8鋁-7.0鎳合金相變化 2000
74 銅-12.0鋁-10.0鎳合金相變化 2000
75 鐵-8.0鋁-8.0鎳-1.3碳合金之相變化 2000
76 鐵-8.8鋁-30.0錳-6.0鉬-1. 1碳合金相變化 1999
77 鐵-8鋁-12鎳-2碳合金之相變化 1999
78 鐵-8.8鋁-30.0錳-6.0鉻-1.0碳合金相變化 1999
79 銅鋁鎳合金之相變化 1999
80 鐵鋁錳矽碳和鐵鋁鎳碳合金相變化 1999
81 鐵-9.5鋁-30.0錳-5.0鉻-1.5碳合金之相變化 1998
82 錳及鋁含量對銅錳鋁合金相變化影響 1997
83 應用於無線電通訊之低操作電壓砷化鎵功率金屬半導體場效電晶體之研究 1997
84 砷化鎵功率金屬半導體場效電晶體之次微米閘極簡易製程方法 1997
85 鐵-9.0 鋁-30.0 錳-1.5 矽-2.0碳合金相變化 1997
86 鐵鋁錳碳, 鐵鋁錳矽碳和鐵鋁鎳碳合金相變化 1996
87 銅－35錳－25鋁合金相變化 1996
88 鐵-12.0鋁-30.0錳-1.2碳合金相變化 1996
89 鐵鋁錳碳, 鐵鋁錳矽碳和鐵鋁鎳碳合金相變化 1996
90 銅-24.8錳-30.0鋁合金相變化 1995
91 鐵-10.0鋁-30.5錳-2.0碳合金相變化 1995
92 鐵-9.0鋁-30錳-1.2矽-0.5碳合金相變化 1994
93 鐵-9.0鋁-31.2錳-1.6碳合金相變化 1993
94 銅錳鋁合金相變化 1993
95 銅-25錳-25鋁和銅-25錳-35鋁合金淬火顯微結構 1992
96 鐵鋁錳碳和鐵鋁錳碳矽合金相變化 1992
97 鐵鋁錳碳和鐵鋁錳碳矽合金相變化 1992
98 鐵-鋁-錳-碳合金之晶界析出物 1991
99 鐵鋁錳和鐵鋁鎳合金相變態 1990
100 以快速升溫化學束磊晶法成長矽鍺磊晶及其特性分析 1989
101 鐵鋁錳矽合金之相變化 1989
102 鐵鋁錳矽碳合金之相變化 1988
103 鐵錳鋁合金之相變化 1988
104 鐵錳鋁鉬碳合金之相變化 1988
105 鐵錳鋁矽碳合金的相變化 1987
106 鐵錳鋁鎳鉻碳合金之相變化 1987
107 鐵錳鋁鎳碳合金的相變化 1987
108 鐵-錳-鋁-鎳-鉻-碳合金之相變化 1987
109 鋁－錳－鐵－矽－鎂合金之相變化 1986
110 鐵鋁錳鉻合金魏曼型Ａ13β錳組織之研究 1986
工學院