1. 目前位置：
朝春光

朝春光 Chao, Chuen-Guang

電子郵件／E-mail：cgchao@mail.nctu.edu.tw

服務單位／Department：工學院 ／ 材料科學與工程學系奈米科技碩博班

著作期間／Publish Period：1990 - 2014-08-14

著作統計／Statistics

Article（94）
Patents（11）
Plan（33）
Proceedings Paper（6）
Thesis（85）

Article

序號
No.		 標題
Title		 著作日期
Date
1 Conducting Ag/oligothiophene complex pastes through a simple quenching/chelation method
 2014-08-14
2 Deformation mechanisms in ultrahigh-strength and high-ductility nanostructured FeMnAlC alloy
 2014-02-15
3 Structure and properties of gas-nitrided nanostructured FeAlMnC alloy
 2013-12-16
4 Effect of ECAE on Microstructures and Mechanical Properties of Solution Heat Treated Mg-5(mass%) Sn Alloy
 2013-08-01
5 Effect of Temperature and Extrusion Pass on the Consolidation of Magnesium Powders Using Equal Channel Angular Extrusion
 2013-05-01
6 Enhanced ductility of the ZA85 magnesium alloy fabricated by equal-channel angular pressing
 2013-04-15
7 Structural characterizations of Cu3Pt electrocatalyst featuring Pt-rich surface layers synthesized via mechanical alloying and selective dissolution routes
 2013-03-05
8 A novel high-strength, high-ductility and high-corrosion-resistance FeAlMnC low-density alloy
 2013-03-01
9 Effects of equal channel angular extrusion on the microstructure and high-temperature mechanical properties of ZA85 magnesium alloy
 2012-07-01
10 Influence of microstructure and its evolution on the mechanical behavior of modified MAR-M247 fine-grain superalloys at 871 degrees C
 2012-03-30
11 Effect of compressive stress on nickel-induced lateral crystallization of amorphous silicon thin films
 2012-01-31
12 Influence of Rhenium on the Grain Boundary Strength, Phase Evolution, and High Temperature Mechanical Properties of a Fine-Grain Nickel-Base Superalloy at 982 degrees C
 2011-10-01
13 Effect of Carbon on Spinodal Decomposition in Fe-26Mn-20Al-C Alloys
 2011-03-01
14 Influence of Rhenium on the Mechanical Behavior and Fracture Mechanism of a Fine-Grain Superalloy at Elevated Temperatures
 2011-02-01
15 A New Austenitic FeMnAlCrC Alloy with High-Strength, High-Ductility, and Moderate Corrosion Resistance
 2010-12-01
16 Fabrication of bismuth oxide-tin oxide nanowires by direct thermal oxidation of Bi-Sn eutectic nanowires
 2010-11-30
17 The Size Effect on Solidification in Eutectic Bismuth-Tin (Bi-Sn) Nanowires by In-Situ Annealing Processes 2010-10-01
18 Phase Separation from L2(1) to (B2+L2(1)) in Fe-24.6Al-7.5Ti Alloy
 2010-10-01
19 Excellent combination of strength and ductility in an Fe-9Al-28Mn-1.8C alloy
 2010-07-01
20 Relationship between Microstructures and Tensile Properties of an Fe-30Mn-8.5Al-2.0C Alloy
 2010-06-01
21 Formation of Hagg Carbide in an Fe-30Mn-10Al-4Cr-0.45C Alloy
 2010-06-01
22 Effects of Rhenium on Microstructure and Phase Stability of MAR-M247 Ni-Base Fine-Grain Superalloy
 2010-04-01
23 Mechanism of Aluminum Induced Lateral Crystallization of Amorphous Silicon
 2010-01-01
24 Novel morphology and solidification behavior of eutectic bismuth-tin (Bi-Sn) nanowires
 2009-07-29
25 Fabrication and characterization of eutectic bismuth-tin (Bi-Sn) nanowires
 2009-05-31
26 Corrosion behaviors of austenitic Fe-30Mn-7Al-xCr-1C alloys in 3.5% NaCl solution
 2009-04-15
27 Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy
 2008-07-01
28 Sputter deposition of multi-element nanoparticles as electrocatalysts for methanol oxidation
 2008-07-01
29 Relational analysis between parameters and defects for electron beam welding of AZ-series magnesium alloys
 2008-06-19
30 Microstructure and properties of Pb nanowires fabricated by casting
 2008-06-01
31 Optimal parameters for low and high voltage electron beam welding of AZ series magnesium alloys and mechanism of weld shape and pore formation 2008-03-01
32 The effect of hot-dipped aluminum coatings on Fe-8Al-30Mn-0.8C alloy
 2008-02-01
33 Phase transitions in an Fe-9Al-30Mn-2.0C alloy
 2007-11-01
34 Formation of (B2+D0(3))phases at al2(100) anti-phase boundary in an Fe-23 at.%Al-8.5 at.%Ti alloy
 2007-11-01
35 Effect of chromium content on corrosion Behaviors of Fe-9Al-30Mn-(3,5,6.5,8)Cr-1C alloys
 2007-11-01
36 Formation of (B2+D0(3)) two-phase microstructure in a Fe-23 Al-7 Ti alloy
 2007-11-01
37 Influences of Ti, TiN, Ta and TaN layers on integration of low-k SiOC : H and Cu
 2007-07-15
38 Orientation relationship between C14 precipitate and (A2+D0(3)) matrix in an Fe-20at.%Al-8at.%Ti alloy
 2007-07-01
39 Optimum evaluation for electron beam weldments of AZ61A-F extruded plates 2007-05-01
40 Aluminum element effect for electron beam welding of similar and dissimilar magnesium-aluminum-zinc alloys
 2007-05-01
41 A novel method of centrifugal processing for the synthesis of lead-bismuth eutectic alloy nanospheres and nanowires
 2007-03-01
42 Characterization on electron beam welds and parameters for AZ31B-F extrusive plates
 2007-02-02
43 Improving electrical characteristics of Ta/Ta2O5/Ta capacitors using low-temperature inductively coupled N2O plasma annealing
 2007-01-01
44 A study of weldability and fracture modes in electron beam weldments of AZ series magnesium alloys
 2006-11-05
45 The investigation of photoluminescence centers in porous alumina membranes
 2006-08-01
46 Control ability of spin coating planarization of resist film and optimal control of developers
 2006-08-01
47 Effect of dispersant on preparation of colloidal magnetite nanocrystals
 2006-07-01
48 Influence of bias-temperature stressing on the electrical characteristics of SiOC : H film with Cu/TaN/Ta-gated capacitor
 2006-07-01
49 Fabrication of single-crystal tin nanowires by hydraulic pressure injection
 2006-01-28
50 High-reliability Ta2O5 metal-insulator-metal capacitors with Cu-based electrodes
 2006-01-01
51 Isolation of magnetite nanoparticles by colloidal dispersant in aqueous solution
 2006-01-01
52 Numerical simulation and experimental investigation for design of a carbon fiber tow pneumatic spreading system
 2005-10-01
53 A novel method for net-shape forming of hypereutectic Al-Si alloys by thixocasting with powder preforms
 2005-08-25
54 Electrochemical characteristics of surface of titanium formed by electrolytic polishing and anodizing
 2005-08-01
55 Analysis of instability in a critical dimension bar due to focus and exposure
 2005-08-01
56 Novel multilayered Ti/TiN diffusion barrier for Al metallization
 2005-08-01
57 Dry sliding wear behaviors of Al-25Si-2.5Cu-1Mg alloys prepared by powder thixocasting
 2005-04-25
58 Characterization of lead-bismuth eutectic nanowires
 2005-04-01
59 Improvement in instable analysis of heat inflation induced line-width after replacing pellicle with diamond film on reticle (photo-masks)
 2005-04-01
60 Template assisted fabrication of tin nanospheres by thermal expansion and rapid solidification process
 2005-03-01
61 Post-treatment method of producing ordered array of anodic aluminum oxide using general purity commercial (99.7%) aluminum
 2005-03-01
62 Fabrication of isolated alloy nanoballs and nanowires using centrifugal force
 2005-02-01
63 Analysis of the effects of reflectance and refraction generated by wafers made from fused silica, ALOxNy and TiSixNy under different light sources on pattern length and best focus
 2005-01-01
64 Numerical and experimental analysis of Cu diffusion in plasma-treated tungsten barrier
 2005-01-01
65 Nanoparticles of Pb-Bi eutectic nucleation and growth on alumina template
 2004-12-01
66 Analysis of instability line width and white wall created by the photolithography process
 2004-11-01
67 Effects of carbon fiber/Al interface on mechanical properties of carbon-fiber-reinforced aluminum-matrix composites
 2004-07-01
68 The growth morphology and crystallinity of electroless NiP deposition on silicon
 2004-06-30
69 Influence of N2O plasma treatment on microstructure and thermal stability of WNx barriers for Cu interconnection
 2004-05-01
70 Thixocasting of hypereutectic Al-25Si-2.5Cu-1Mg-0.5Mn alloys using densified powder compacts
 2004-02-05
71 Growth and field emission of carbon nanofibers on electroless Ni-P alloy catalyst
 2003-09-01
72 Mechanisms of circular defects for shallow trench isolation oxide deposition
 2003-09-01
73 Effect of substrate on the step coverage of plasma-enhanced chemical-vapor deposited tetraethylorthosilicate films
 2003-07-01
74 A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting
 2002-03-01
75 Effect of heat treatments on in-situ Al2O3/TiAl3 composites produced from squeeze casting of TiO2/A356 composites
 2002-02-01
76 X-ray reflectivity and FTIR measurements of N-2 plasma effects on the density profile of hydrogen silsesquioxane thin films
 2001-10-01
77 Numerical and experimental study of internal flow field for a carbon fiber tow pneumatic spreader
 2001-04-01
78 Effect of particle-size distribution on the properties of high-volume-fraction SiCP-Al-based composites
 2000-09-01
79 Deformation and fracture of Al2O3/Al-Zn-Mg-Cu metal matrix composites at room and elevated temperatures
 2000-04-30
80 Aging kinetics of heat-treated Zn-4Al-3Cu alloy
 1999-06-18
81 Phase transformation of Zn-4Al-3Cu alloy during heat treatment
 1999-04-01
82 The effects of Mg microaddition on the mechanical behavior and fracture mechanism of MAR-M247 superalloy at elevated temperatures
 1999-03-01
83 The influence of magnesium on carbide characteristics and creep behavior of the Mar-M247 superalloy
 1997-12-22
84 Effects of volume fraction of reinforcement on tensile and creep properties of in-situ TiB/Ti MMC
 1997-11-01
85 In situ fracture observation of a TiC/Ti MMC produced by combustion synthesis
 1996-10-15
86 Effect of magnesium on mechanical properties of Al2O3/Al-Zn-Mg-Cu metal matrix composites formed by squeeze casting
 1996-08-30
87 Effect of magnesium on mechanical properties of Al2O3/Al-Zn-Mg-Cu metal matrix composites formed by squeeze casting
 1996-07-15
88 Effect of magnesium on the aging behavior of Al-Zn-Mg-Cu/Al2O3 metal matrix composites 1996-07-01
89 Mechanical properties and 95 degrees C aging characteristics of zircon-reinforced Zn-4Al-3Cu alloy 1996-03-01
90 EFFECT OF DELTA-ALUMINA FIBERS ON THE AGING CHARACTERISTICS OF 2024-BASED METAL-MATRIX COMPOSITES
 1995-05-01
91 EFFECT OF MAGNESIUM ON MECHANICAL-PROPERTIES OF ALUMINA-FIBER-REINFORCED ALUMINUM-MATRIX COMPOSITES FORMED BY PRESSURE INFILTRATION CASTING 1993-09-15
92 EFFECTS OF CARBON CONTENTS ON THE TENSILE PROPERTIES AND DEFORMED MICROSTRUCTURES OF AUSTENITIC FE-28MN-9AL-XC ALLOYS 1992-11-01
93 TENSILE PROPERTIES OF A DO3-CONTAINING FE-MN-AL-SI-C ALLOY AT ELEVATED-TEMPERATURES 1992-05-01
94 OBSERVATIONS OF DEFORMATION TWINS IN HIGH-TEMPERATURE TENSILE TESTS OF AN FE-28.0MN-7.5A1-0.75C-ALLOY 1992-01-15

Patents

序號
No.		 標題
Title		 著作日期
Date
1 電化學模具
 2012-05-21
2 METHOD FOR FABRICATING NANOSCALE THERMOELECTRIC DEVICE
 2011-03-10
3 奈米熱電裝置的製造方法
 2009-08-16
4 電化學模具
 2009-06-01
5 具陣列式奈米孔洞之氧化鋁薄膜的製造方法
 2007-08-11
6 製造奈米線的方法和儀器
 2006-10-01
7 製造奈米線的方法和儀器
 2006-09-21
8 具陣列式奈米孔洞之氧化鋁薄膜的製造方法
 2006-03-16
9 以離心方式製作奈米材料及所製得之奈米球及奈米線
 2006-03-16
10 Method of manufacturing aluminum oxide film with arrayed nanometric pores
 2006-03-09
11 以離心方式製作奈米材料及所製得之奈米球及奈米線
 2005-11-21

Plan

序號
No.		 標題
Title		 著作日期
Date
1 Mg-(2-8)wt.%Sn合金經等通道擠型製程後腐蝕性質之研究及改善 2014
2 Mg-(2-8)wt.%Sn合金經等通道擠型製程後腐蝕性質之研究及改善 2013
3 Mg-xSn-yCa合金經ECAE製程之顯微組織與高溫性質研究 2012
4 Mg-xSn-yCa合金經ECAE製程之顯微組織與高溫性質研究 2011
5 Mg-xSn-yCa合金經ECAE製程之顯微組織與高溫性質研究 2010
6 ZA85細晶鎂合金超塑性應用於汽車零件之評估 2009
7 利用鑄造法製造三元合金之高效率散熱元件及其性質研究
 2009
8 利用鑄造法製造三元合金之高效率散熱元件及其性質研究 2008
9 壓鑄Mg-8Zn-XAl-YCa合金高溫機械性質研究
 2007
10 單晶奈米金屬線(Ａu、Ag、Cu)製備及其性質與應用之研究 2006
11 氣體壓鑄法製造ZnO和Bi2O3陣列式奈米線材(III)
 2005
12 氣體壓鑄法製造ZnO和Bi/sub 2/O/sub 3/陣列式奈米線材(II)
 2004
13 過共晶鋁矽合金粉末成形新方法之研究(III) 2004
14 過共晶鋁矽合金粉末成形新方法之研究(II)
 2003
15 氣體壓鑄法製造ZnO和Bi/sub 2/O/sub 3/陣列式奈米線材(I)
 2003
16 過共晶鋁矽合金粉末成形新方法之研究(I)
 2002
17 利用等通道轉角擠型法(ECAE)製作次微米晶粒鎂合金之研究
 2001
18 鎂合金之表面改質 2001
19 內造法製作鈦鋁介金屬基複合材料及其機械性質之研究 2000
20 內造法製作鎳鋁介金屬基複合材料極其機械性質之研究
 2000
21 以金屬模離心鑄造法研製鋼鐵複合材料---子計畫I：鐵基複合材料之陶瓷強化材表面改質與潤溼性之研究(II)
 1999
22 MAR－M247超合金高溫脆性之探討及延伸率提升(III) 1998
23 MAR－M247超合金高溫脆性之探討及延伸率提升(II) 1997
24 鋁基複合材料熔鑄製程與性質提升之研究---子計畫I：鋁基複合材料擠壓鑄造製程改善及其機械性質之研究(III) 1997
25 鐵鋁錳合金研究：子計劃五－Fe-Mn-Al-C-xM(Mo,Nb,Ti)合金高溫機械性質研究(II) 1997
26 鋁基複合材料熔鑄製程與性質之提升研究---子計畫一：鋁基複合材料擠壓鑄造製程改善及其機械性質之研究(II) 1996
27 鐵鋁錳合金研究---子計畫六：Fe-Mn-Al-C-XM(Mo,Nb,Ti)合金高溫機械性 1996
28 鋁基複合材料熔鑄製程與性質之提升研究---總計畫 1996
29 ADI齒輪之研發子計畫---合金系(Ni-Mo-Cu-Mn)球墨鑄鐵沃斯田鐵化之研究 1995
30 鋁基複合材料熔鑄製程與性質之提升研究---子計畫III：鋁基複合材料擠壓鑄造製程改善及其機械性質之研究 1995
31 ADI齒輪之研發子計畫---合金系(Ni-Mo-Cu-Mn)球墨鑄鐵沃斯田鐵化之研究 1994
32 擠壓鑄造法製作鋁基(7075)複合材料之研究 1993
33 電流對鉛-錫合金凝固組織影響之研究 1993

Proceedings Paper

序號
No.		 標題
Title		 著作日期
Date
1 A study on fabrication, morphological and optical properties of lead sulfide nanocrystals 2008-02-01
2 Growth and characteristics of lead sulfide nanocrystals produced by the porous alumina membrane
 2007-11-15
3 Magnetic and optical properties of isolated magnetite nanocrystals
 2007-05-01
4 Repairing of etching-induced damage of high-k Ba0.5Sr0.5TiO3 thin films by oxygen surface plasma treatment
 2006-06-01
5 Improving electrical properties and thermal stability of (Ba,Sr)TiO3 thin films on Cu(Mg) bottom electrodes
 2006-06-01
6 Effects of TMT on reinforcement characteristics of combustion-assisted in-situ titanium matrix composite 1997-01-01

Thesis

序號
No.		 標題
Title		 著作日期
Date
1 鐵-9鋁-30錳-(1.0~1.3)碳合金於熱滾軋狀態下之顯微結構與其機械性質之研究 2013
2 離子氮化及氣體氮化對鐵鋁錳碳合金顯微結構、機械性質及抗腐蝕性質影響之研究
 2013
3 鎂-2、5、8(wt.%)錫合金經等通道轉角擠型後 其顯微組織暨室溫與高溫機械性質之研究
 2013
4 利用三點彎曲試驗探討Mg-5wt.%Sn合金在不同NaCl濃度下蝕孔與應力腐蝕裂縫關係之研究 2013
5 等通道轉角擠型製程對ZA85鎂合金之顯微組織與機械性質改善之研究
 2013
6 固溶熱處理ZA85鎂合金經等通道轉角擠製後顯微組織與機械性質改善之研究
 2012
7 離子氮化之壓力對鐵-9鋁-30錳-1.8碳合金腐蝕與機械性質影響
 2011
8 錫鉍共晶奈米線材之製備、生成機制與應用
 2010
9 ZA85 鎂合金經等通道轉角擠型後抗潛變性質的研究 2010
10 利用旋塗分佈方法使非晶矽藉由鎳誘發側向結晶 2010
11 溶膠凝膠法製備InGaZnO4透明導電薄膜的光電性質研究 2009
12 高導熱鋁基複合材料(Gr/A356)之擠壓鑄造製程與性質研究
 2009
13 奈米尺度下Bi-Sn共晶合金之凝固機制探討
 2009
14 鐵-9鋁-30錳-6鉻-1.8碳合金之顯微結構與抗腐蝕性質 2009
15 壓應力對鎳片在非晶矽薄膜誘發側向結晶之影響
 2008
16 鐵-9鋁-30錳-2碳合金之顯微結構與機械性質
 2008
17 機械合金法與電化學去合金製程製作複合觸媒應用於燃料電池
 2008
18 ZA85鎂合金經等通道轉角擠型後顯微組織與機械性質改善之研究
 2008
19 銀蒸鍍於不同基板之表面形貌對表面增強拉曼散射效應的影響
 2008
20 多壁奈米碳管/導電型碳黑應用於複合型導電高分子之電性研究
 2007
21 利用壓鑄法製作Bi0.5Sb1.5Te3熱電材料奈米線
 2007
22 鎳矽化合物誘發多晶矽薄膜側向結晶及其顯微結構觀察
 2007
23 利用銦-錫氧化物(ITO)廢料回收高純度銦材
 2007
24 多孔性氧化鋁薄膜之發光性質研究及其在光學上應用
 2007
25 以高分子分散劑作為奈米粉體濕式分散研磨、界面改質及合成的研究
 2007
26 鐵-9鋁-30錳-1碳合金衝擊性質與變形微結構之研究
 2007
27 鎂鋁基合金之電子束銲接研究
 2006
28 A356-20%SiC鋁基複合材料經等通道轉角擠型之微結構及性質研究
 2006
29 鐵-9鋁-30錳-2.5鉻-0.6碳合金之相變化
 2006
30 三點彎曲方式量測陽極氧化鋁模板機械性質與破斷面分析之研究
 2006
31 以鋁誘導非晶矽低溫結晶及側向結晶之研究
 2006
32 鐵-30錳-8.5鋁-5鈦-1碳合金相變化
 2006
33 以機械合金法製備多元高熵合金粉末及其在燃料電池之應用
 2006
34 銀誘發非晶矽形成低溫多晶矽薄膜之研究
 2006
35 鐵鋁錳合金之相變化及機械性質
 2006
36 鐵-18 at.%鋁-10 at.%鈦合金之相變化
 2006
37 離心法製作鉛-鉍合金奈米線之研究
 2006
38 銅內連線及低介電常數材料製程整合於高介電常數薄膜電容
 2005
39 利用模板法研究錫奈米線與奈米球之製作與特性
 2005
40 三元非晶質薄膜擴散阻障層及銅-矽-氧系統之熱力學計算應用於銅金屬化 2004
41 利用粉末預形體觸變鑄造過共晶鋁矽合金之研究
 2004
42 應用流體展開器三維內流場之數值分析與實驗發展碳纖維流體展開系統
 2004
43 鉭電極與鈦酸鍶鋇薄膜電容之可靠性與製程整合研究
 2004
44 304不□鋼纖維機械性質與應力腐蝕之研究 2004
45 無電鍍NiP析鍍於矽基材及應用於生長奈米碳纖之研究
 2004
46 半導體微影奈米尺寸的穩定性控制
 2004
47 以陽極氧化鋁模板製備氧化鋅奈米線及其發光性質之研究
 2003
48 汽相蒸鍍四支柱單晶氧化鋅其自組性質及光電特性之研究
 2003
49 不□鋼經電解拋光處理後表面奈米陣列之研究 2002
50 氧化鋁奈米孔洞的製備與其電化學性質之探討 2002
51 機械合金法製備奈米二氧化鈦顆粒/鋁複材之熱分析研究 2002
52 襯層在深次微米金氧半導體積體電路製造的應用與影響 2002
53 Al（l）/NiO（s）/Ni（s）液固介面反應機制之研究 2001
54 鎂合金(AZ 61)表面改質之電化學特性研究 2001
55 以擠壓鑄造法探討內造Ni-Al系介金屬複合材料 2000
56 氮化鎢及其電漿處理在銅金屬化系統之擴散阻障特性 2000
57 應用田口法之低介電常數材料(掺碳氧化矽)研究 2000
58 AZ31鎂合金經ECAE後晶粒細化與超塑性之研究 2000
59 MnO2電化學電容製程與特性研究 2000
60 碳纖維強化鋁基複材界面與機械性質之研究 1999
61 形狀記憶複合材料(TiNif/A356)的製備及其機械性質之研究 1999
62 疊層阻障層鈦/氮化鈦及氮化鉭應用於銅金屬化及鋁金屬化之研究 1998
63 IN-713LC超合金細晶製程及機械性質之研究 1998
64 鈦鋁介金屬複合材料的生成反應特性與其高溫性質之研究 1998
65 鋅-4%鋁-3%銅合金相變化研究 1998
66 Mar-M247超合金中高溫脆性及破壞機構之研究 1997
67 擠壓鑄造法製做金屬負荷磁石之性質及製程研究 1997
68 6061(Al-Mg-Si)鋁合金經ECAE(Equal Channel Angular Extrusion)後晶粒成長與時效動力之研究 1997
69 氧化鋁短纖強化鋁基複合材料(Al-Zn-Mg/Al-2O3(f))高溫機械性質之研究 1996
70 疊層複合材料(Cf /A356)之擠壓鑄造製程及性質研究 1996
71 鉬鈮元素對鐵鋁錳合金高溫機械性質之影響 1996
72 鈦基內造強化複合材料製程及其機械性質之研究 1996
73 碳纖無電鍍銅鎳製程參數對鋁基複合材料(A356/Cf)性質之影響 1995
74 擠壓鑄造法製作石墨顆粒/鋁基複合材料之研究 1995
75 擠壓鑄造法製作高體積分率碳化矽:鋁基複合材料之研究 1994
76 鎂元素對鋁基複合材料(Al-Zn-Mg/Al2O3(f))機械性質之影響 1994
77 球墨數與球墨粒徑對球墨鑄鐵沃斯田鐵化之影響 1994
78 鎂元素對鋁鋅鎂基複合材料時效行為影響之研究 1993
79 電流對鉛錫共晶合金凝固組織影響之研究 1992
80 擠壓鑄造法製作鋁基(2024)/Al2O3複合材料時效硬化之研究 1992
81 鐵二十八錳八鋁ｘ碳ｙ矽合金在中間溫度之拉伸變形與變形微結構 1992
82 鎂元素對氣體壓力鑄造法製作鋁基複合材枓之性質影響 1991
83 III-V化合物半導體活性離子蝕刻製程 1991
84 陶瓷顆粒強化鋅鋁銅基複合材料研究 1991
85 擠壓鑄造法製作鋁基(2024)複合材料之研究 1990
工學院