Browsing by Issue Date, starting with "2005-05-10"

Now showing 1 - 20 of 66729

喝海洋之前
(2005-05-10)
宇文正
視訊壓縮裝置與方法
(2005-05-11)
蔡尚軒
;
杭學鳴
;
蔡家揚
;
蔣迪豪
本發明係提供一種視訊壓縮裝置與方法，係結合移動補償之時間濾波技術以及內嵌式小波編碼，可達到壓縮量化誤差量、時間解析及空間解析之可調性，可達成移動資訊的資訊量可調性，用以改進小波視訊壓縮方法在低位元率的表現，而提出一個移動資訊分層編碼法，可將移動向量依其所代表的空間方塊大小或時間畫幅數或移動向量數值精準度分層編碼，並將移動向量分成多個層次，當視訊資料流需要調整時，只把需要的移動資訊放入最後的資料流，利用上述之方法，可以讓連續畫面小波視訊壓縮在低位元率的表現改進許多，而在高位元率時只損失一點壓縮比。
可同時量測光學晶體厚度及光軸之影像式偏極光量測方法
(2005-05-11)
黃中垚
;
李建立
本發明提供一種可同時量測光學晶體厚度及光軸之影像式光學量測方法，其係利用同一偏光儀架構先進行析光片旋轉量測，以透過析光片連續變化之不同方位角來取得相對應之一系列的光強度變化影像，並將該等影像擬合以得到晶體薄膜之光軸投影在薄膜平面之投影光軸指向，接著再進行樣品旋轉量測，以連續調整偏極光對於薄膜之入射角，進而測得薄膜光軸在三維空間的指向和厚度之二維分佈。因此本發明在僅使用一量測架構之前提下，可同時測得光學晶體之厚度及其光軸指向，並可達成降低量測成本、經濟、量測方便及測值精確等功效。
適用於高密度印刷電路基板之環氧樹脂系材料
(2005-05-11)
林木獅
;
李巡天
;
莊絢仁
;
林志浩
本發明提供一種適用於高密度印刷電路基板之環氧樹脂系材料，組成物包括環氧樹脂、硬化劑及催化劑，其中環氧樹脂及硬化劑中係同時存在有矽氧烷(silynorbornane)基團及亞醯胺基團，且矽氧烷基團係佔總組成之5重量%以上，亞醯胺基團佔總組成之8重量%以上。因此本發明係在不添加增韌劑之前提下，提供一同時具有高強韌性、低應力、高接著強度及低介電特性之環氧樹脂系材料，以滿足高密度印刷電路基板之特性要求，並具有大幅降低材料成本之功效。
Study of the morphologies and dielectric constants of nanoporous materials derived from benzoxazine-terminated poly(epsilon-caprolactone)/polybenzoxazine co-polymers
(2005-05-11)
Su, YC
;
Chen, WC
;
Ou, KL
;
Chang, FC
;
應用化學系
We have generated porous polybenzoxazine (PBZZ) materials by using a B-a type PBZZ as the matrix and various molecular weights of poly(ε-caprolactone) (pa-PCL) as the labile constituent. The slight degree of hydrogen bonding that exists between the two polymers results in micro-phase separation without an excess degree of aggregation occurring. The porous structures form after hydrolysis of the PCL domains; we characterized them using a variety of techniques, including FT-IR spectroscopy, DSC, TGA, FE-SEM, and DEA. At 298 K and 10(5) Hz, we obtained a thin, transparent, and nanoporous film that has a very low dielectric constant (1.95). © 2005 Elsevier Ltd. All rights reserved.
Biochemical sensing device
(2005-05-12)
Yang, Yuh-Shyong
;
Wu, Chung-Yu
;
Lu, Ude
;
Shih, Yu-Chuan
;
Hu, Ben C.-P.
The invention is a biochemical sensing device, including a photodiode capable of sensing the light generated by the reaction made by a specific compound, a specific enzyme, and a luminol as well as converting the optical signal into a current signal. Also, there is a current/voltage converting circuit capable of converting the current signal into an analog voltage signal. In turn, the analog voltage signal can be converted into a digital voltage signal through an analog/digital converter. Finally, by using an electronic device, the digital voltage signal can be received and analyzed, and through the analysis, the amount of the specific compound can be measured. The device of the invention can provide a simple real-time medical assay that can be performed in massive amount. For this reason, the drawbacks of a conventional spectrum analysis instrument of being bulky and expensive can be improved.
Raman scattering and efficient UV photoluminescence from well-aligned ZnO nanowires epitaxially grown on GaN buffer layer
(2005-05-12)
Cheng, HM
;
Hsu, HC
;
Tseng, YK
;
Lin, LJ
;
Hsieh, WF
Optical phonon confinement and efficient UV emission of ZnO nanowires were investigated in use of resonant Raman scattering (RRS) and photoluminescence (PL). The high-quality ZnO nanowires with diameters of 80-100 nm and lengths of several micrometers were epitaxially grown through a simple low-pressure vapor-phase deposition method at temperature 550 &DEG; C on the precoated GaN(0001) buffer layer. The increasing intensity ratio of n-order longitudinal optical (LO) phonon (A(1) (nLO)/E-1 (nLO)) with increasing scattering order in RRS reveals the phonon quantum confinement as shrinking the diameter of ZnO nanowires. The exciton-related recombination near the band-edge transition dominate the UV emissions at room temperature as well as at low temperature that exhibits almost no other nonstoichiometric defects in the ZnO nanowires.
Low-power low-voltage reference using peaking current mirror circuit
(2005-05-12)
Cheng, MH
;
Wu, ZW
;
電控工程研究所
;
Institute of Electrical and Control Engineering
A low-power low-voltage bandgap reference using the peaking current mirror circuit with MOSFETs operated in the subthreshold region is presented. A demonstrative chip was fabricated in 0.35 mu m CMOS technology, achieving the minimum supply voltage 1.4 V, the reference voltage around 580 mV, the temperature coefficient 62 ppm/degrees C, the supplied current 2.3 mu A, and the power supply noise rejection ratio of -84 dB at 1 kHz.
High-resolution intelligent rotor machine diagnostic system and method
(2005-05-12)
Bai, Ming-Sian
;
Hung, Ming-Hung
;
Huang, Jia-Min
;
Su, Fu-Cheng
The present invention relates to a smart system and method of performing high-resolution frequency order analysis/diagnosis on rotor, in which such system is characterized in that capable of performing order analysis via a Kalman filter or a RLS (Recursive Least Square) algorithm while determining the failure status based on the Fuzzy theory. The smart system of present invention comprises a data acquisition means, a bench data setup means, a STFT time-spectra analysis/re-sampled order tracking means, a Kalman filter or RLS algorithmic means, a fuzzy diagnosis means and a window interface (e.g., GUI) while repeatedly making use the functions of those means so as to achieve the real-time diagnosis on rotor.
Strong anisotrpoic maganetoresistance and magnetic interaction in La0.7Ce0.3Mn0.3/La0.7Ca0.3MnO3 p-n junction
(2005-05-15)
Chou, H
;
Hong, ZY
;
Sun, SJ
;
Juang, JY
;
Chang, WJ
The p-n junction made by colossal magnetoresistance materials, such as La0.7Ce0.3MnO3/La0.7Ca0.3MnO3, has great interest for its potential applications. However, the physics of the magnetic state and transport properties of the interface still remains open. In this article, bilayer La0.7Ce0.3MnO3/La0.7Ca0.3MnO3/STO films with a nearly perfect interface were studied. The p-n interface possibly becomes an antiferromagnetion-insulating layer as their parent compound, LaMnO3, and confines the bias current flowing only on the top layer. The top and bottom layers interact with each other in a way that a strong anisotropy tin magnetoresistance measurements was observed. (c) 2005 American Institute of Physics.
Magnetic force-induced damping effect for magnetic bearing motor
(2005-05-15)
Wang, CC
;
Yao, YD
;
Chang, YH
;
Tung, PC
;
Xiao, RB
An innovative damping induced by magnetic force was designed successfully for a totally passive magnetic bearing motor. A magnetic ring of high permeability and an annular-shaped rubber pad were mounted on the stator 0.55 mm below the permanent magnet of the rotor. Computer simulations were compared with experimental measurements to decide on the material and configuration of the critical components. The natural frequencies for lateral and rotational modes of the rotor are around 22 Hz measured by impulse method. Both the magnetic bearing motor with and without magnetic damping are rotated at a rated speed of 3840 rpm, which is far above the first critical speed of 1305 rpm. Without magnetic damping, the natural damping ratio in the radial direction of the rotor is 0.0655. After damping, it increases to 0.1401. We have demonstrated by both experimental measurement and theoretical calculation that the antishock performance is significantly improved by the innovative damping technology in a passive magnetic bearing motor. (c) 2005 American Institute of Physics.
Pattern formations and spatial entropy for spatially discrete diffusion equations
(2005-05-15)
Cheng, CY
;
Shih, CW
;
應用數學系
;
Department of Applied Mathematics
Formation of mosaic patterns for spatially discrete diffusion equations with cubic nonlinearity is investigated. We construct feasible basic patterns in each parameter region and combine these basic patterns into large patterns on one- and two-dimensional lattices. The basic patterns are characterized and constructed through formulating parameter conditions based on a geometrical setting. Spatial entropy associated with these patterns are computed or estimated. We also consider three typical boundary conditions and investigate their influences on pattern formations and spatial entropy. Several numerical computations are performed to illustrate such a formation of patterns. (c) 2005 Elsevier B.V. All rights reserved.
Temperature dependence of vortex configuration by honeycomb hole arrays in a superconducting Nb film
(2005-05-15)
Wu, TC
;
Wang, JC
;
Horng, L
;
Wu, JC
;
Yang, TJ
A honeycomb array of submicrometer holes in a Nb superconducting thin film has been fabricated to investigate the flux pinning effect. It is found that the minima positions reveal two regimes characterized by the matching fields and the fractional ones. It is believed that the complex behavior may come from more than one vortex being captured per pinning site. Furthermore, the temperature dependence of the saturation number of vortices per pinning site together with vortex-vortex interaction gives the complex vortex configurations. (c) 2005 American Institute of Physics.
Current-assisted magnetization switching in submicron permalloy S-shape wires with narrow junctions
(2005-05-15)
Chen, YC
;
Lin, YA
;
Chen, DC
;
Yao, YD
;
Lee, SF
We report the results of the current-assisted magnetization switching in submicron permalloy S-shape wires with narrow junctions (or notches). Domain walls were initially formed and pinned in the vicinity of the notches. Two distinct behaviors are observed in the current-assisted magnetization reversal process. When the applied field is near switching field (Delta H < 7 Oe), the injected current directly switched the wire magnetization, and the needed critical current varied linearly and significantly with the field intensity. In contrast, when the field is relatively far from the switching field (Delta H > 7 Oe), the current only moves the domain wall to a local stable state, and the critical current varied slightly with the field. Moreover, two resistance jumps during current scanning are observed in the cases with magnetization reversals. These results reveal that the current driven effect is closely related to the initial domain states, and are explained by a theoretical model based on spin transfer effect. (c) 2005 American Institute of Physics.
Effect of incorporated CdS nanoparticles on the crystallinity and morphology of poly (styrene-b-ethylene oxide) diblock copolymers
(2005-05-15)
Yeh, SW
;
Wu, TL
;
Wei, KH
;
Sun, YS
;
Liang, KS
Surface-modified CdS nanoparticles selectively dispersed in hexagonally packed poly(ethylene oxide) (PEO) cylinders of poly(styrene-b-ethylene oxide) (PSEO) block copolymers were prepared. The photoluminescence and ultraviolet-visible characteristics of the presynthesized CdS nanoparticles in N,N-dimethylformamide and in PEO domains of the PSEO block copolymers were determined. Because of strong interactions between the CdS nanoparticles and PEO chains, as shown by Fourier transform infrared spectroscopy, the incorporation of the CdS nanoparticles prevented the PEO cylinders from properly crystallizing; this was confirmed by differential scanning calorimetry and wide-angle X-ray diffraction measurements. The intercylinder distance between the swollen and reduced-crystallinity CdS/PEO cylinders in turn increased, as confirmed by small-angle X-ray scattering and transmission electron microscopy. At a high CdS concentration (43 wt % or 8.3 vol % with respect to PEO), however, the hexagonally packed cylindrical nanostructure of the PSEO diblock copolymers was destroyed. (c) 2005 Wiley Periodicals, Inc.
Optimal design of fine magnetic pole pitch fabricated on printed circuit board
(2005-05-15)
Chiu, KC
;
Huang, DR
;
Shieh, HPD
;
光電工程學系
;
Department of Photonics
Using traditional methods, a permanent magnet multipole component magnetized with a magnetic pole pitch of less than 1 mm is very difficult to achieve and a costly, complicated magnetization system is required. In this paper, the optimal design of a fine magnetic pole pitch of less than 1 mm fabricated on a printed circuit board has been successfully investigated and demonstrated. An optimal magnetic pole pitch having large variation and strength in magnetic-flux density was obtained. The characteristics of the optimal magnetic pole pitch are good for signal detection and processing. The measured values of the magnetic-flux density in the z component are in agreement with the calculated values. (c) 2005 American Institute of Physics.
Perpendicular interface resistance in Co/NbxTi1-x multilayers for normal and superconducting NbTi alloy with x=0.4, 0.6
(2005-05-15)
Huang, SY
;
Lee, SF
;
Huang, JC
;
Hwang, GH
;
Yao, YD
We report here the resistance of Co/NbxTi1-x multilayers, for x=0.4 and 0.6, with current flowing perpendicular to the layer plane at 4.2 K. When NbTi films are sandwiched between Co, we found that there are critical thicknesses of 20 nm for x=0.4 and 27 nm for x=0.6, below which no superconducting transition could be found. Using a series resistor model, we extracted the unit area resistance of one pair of Co/NbTi interfaces and compared with the pure Nb case we have reported. The influence of mean free paths and superconducting coherence lengths is analyzed. (c) 2005 American Institute of Physics.
Fiber Bragg grating sequential UV-writing method with real-time interferometric side-diffraction position monitoring
(2005-05-16)
Hsu, KC
;
Sheu, LG
;
Chuang, KP
;
Chang, SH
;
Lai, YC
This work presents a new sequential UV-writing procedure for fabricating long fiber Bragg grating (FBG) devices. To real-time accurately align the position of every exposed FBG section prior to UV exposure, a single-period reference fiber grating with strong refractive index modulation is probed by applying an interferometric side-diffraction method to measure the grating phase as the position reference. In this way the overlapped FBG sections can be connected section-by-section without obvious phase errors, even when the written index-modulation is weak. (C) 2005 Optical Society of America.
Highly efficient blue organic light-emitting devices incorporating a composite hole transport layer
(2005-05-16)
Liao, CH
;
Lee, MT
;
Tsai, CH
;
Chen, CH
;
應用化學系
Organic light-emitting devices (OLEDs) incorporating the copper phthalocyanine (CuPc)/N,N-'-bis-(1-naphthyl)-N,N-'-diphenyl-1,1(')-biphenyl-4,4(')-diamine composite hole transport layer have been fabricated. Under optimal condition, the highly efficient sky-blue OLED based on the aminosubstituted distyrylarylene fluorescent dye, doped in the stable diphenyanthracene blue host achieved a luminance efficiency of 16.2 cd/A with a Commission Internationale d' Eclairage (CIE)(x,y) color coordinate of [0.15, 0.29] at 6.4 V (20 mA/cm(2)) and an external quantum efficiency of 8.7%. (c) 2005 American Institute of Physics.
高解析度智慧型階次診斷系統及其診斷方法
(2005-05-16)
白明憲
;
洪銘宏
;
黃嘉閔
;
蘇富誠
本發明係關於一種高解析度智慧型階次診斷系統及其診斷方法，其係用於旋轉設備之頻率階次分析(order analysis)與診斷，包括：資料擷取裝置，機台資料建立裝置，時頻譜分析和再取樣分析裝置，卡氏濾波器(Kalman filter)或遞迴最小平方演算法(RLS)分析裝置，模糊判斷裝置，視窗介面(GUI)裝置，其中該系統係反覆施行前述各裝置之功能，以隨時獲取該旋轉設備之診斷結果。