1. 目前位置：

瀏覽 的方式： 作者 Kam, T. Y.

跳到： 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
或是輸入前幾個字：  
顯示 1 到 20 筆資料，總共 26 筆  下一頁 >
公開日期標題作者
1-一月-2018Automatic crack detection from 2D images using a crack measure-based B-spline level set modelNguyen, H. N.; Kam, T. Y.; Cheng, P. Y.; 機械工程學系; Department of Mechanical Engineering
1-一月-2013Design and Fabrication of Composite Wind Blades for a 5kW Wind Power SystemKam, T. Y.; 機械工程學系; Department of Mechanical Engineering
2011Development of Glass-fabric Composite Wind Turbine BladeKam, T. Y.; Su, H. M.; Wang, B. W.; 機械工程學系; Department of Mechanical Engineering
1-十一月-2006Elastic constants identification of composite materials using single angle-ply laminateChen, C. M.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-三月-2007Elastic constants identification of symmetric angle-ply laminates via a two-level optimization approachChen, C. M.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-一月-2020Fabrication and Strength Assessment of Composite Corrugated Expansion TubeLiu, J. W.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
2011Failure Analysis of Small Composite Sandwich Turbine Blade Subjected to Extreme Wind LoadChen, C. P.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-一月-2020Fault diagnosis method for worm gearbox using convolutional network and ensemble learningHsiao, J. C.; Shivam, Kumar; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-八月-2007Free-vibration analysis and material constants identification of laminated composite sandwich platesLee, C. R.; Kam, T. Y.; Sun, S. J.; 機械工程學系; Department of Mechanical Engineering
22-八月-2006Identification of mechanical properties of elastically restrained laminated composite plates using vibration dataLee, C. R.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-五月-2009Material characterization of laminated composite materials using a three-point-bending techniqueKam, T. Y.; Chen, C. M.; Yang, S. H.; 機械工程學系; Department of Mechanical Engineering
1-一月-2016Mechanical Reliability Analysis of Pneumatic Solenoid Valve Considering Airflow DisorderHuang, C. Y.; Su, H. M.; Jian, B. S.; Yao, C. L.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-六月-2009Modal characteristics of symmetrically laminated composite plates flexibly restrained at different locationsHao, W. F.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-二月-2014Optimal design of rectangular composite flat-panel sound radiators considering excitation locationJiang, C. H.; Chang, Y. H.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-一月-2020A procedure for power consumption estimation of multi-rotor unmanned aerial vehicleChan, C. W.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
1-一月-2017Progressive failure of composite wind blades with a shear-web spar subjected to static testingKam, T. Y.; Chiu, Y. H.; 機械工程學系; Department of Mechanical Engineering
15-一月-2017Quasi-static buckling and first-ply failure loads of shear web reinforced glass-fabric composite wind bladesKam, T. Y.; Su, H. M.; Huang, C. Y.; 機械工程學系; Department of Mechanical Engineering
15-二月-2020Reliability analysis of composite wind turbine blades considering material degradation of bladesSu, H. M.; Kam, T. Y.; 交大名義發表; National Chiao Tung University
1-四月-2020Shape Design Optimization of a Robot Arm Using a Surrogate-Based Evolutionary ApproachHsiao, J. C.; Shivam, Kumar; Chou, C. L.; Kam, T. Y.; 機械工程學系; Department of Mechanical Engineering
15-一月-2017Sound radiation of panel-form loudspeaker using flat voice coil for excitationJiang, C. H.; Kam, T. Y.; Chang, Y. H.; 機械工程學系; Department of Mechanical Engineering
顯示 1 到 20 筆資料，總共 26 筆  下一頁 >