<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Access type: Metadata onlyAuthor: search.filters.author.Huang, Shin-Ping

Search Results

Now showing 1 - 10 of 15
  • Thumbnail Image
    Item type:Item,
    A Novel Structural Design Serving as a Stress Relief Layer for Flexible LTPS TFTs
    (2019-01-01)
    Wang, Yu-Xuan
    ;
    Chang, Ting-Chang
    ;
    Huang, Shin-Ping
    ;
    Tai, Mao-Chou
    ;
    Zheng, Yu-Zhe
    In this work a novel device structure aiming to suppress the degradations under bending in flexible devices is demonstrated, named as a wing-shape TFT. Investigations of the electrical characteristics and reliabilities are supported by simulations, theoretical calculations, and structural discussions. First, through both electrical and mechanical stress simulation, the regions of degradation are confirmed to occur at the corner of the gate insulator. After long term mechanical stress, behaviors including an abnormal hump, serious threshold voltage (Vth) shifts, on-current increase, and off-current decrease are observed. By extending the active layer, also serving as a stress relief layer, removes the degradation regions away from the main channel. Therefore, the reliability of the devices is dramatically improved. The geometries of the wings in wing-shape TFTs are also in consideration. From results, with different wing lengths, a similar improvement of the reliability is shown, but the on current is enhanced when the wing length is extended. These phenomena are realized as a result of the difference in the effective width. The proposed wing-shape LTPS TFT has its potential and benefits for future flexible displays.
  • Thumbnail Image
    Item type:Item,
    Abnormal hysteresis formation in hump region after positive gate bias stress in low-temperature poly-silicon thin film transistors
    (2020-09-30)
    Tu, Hong-Yi
    ;
    Chang, Ting-Chang
    ;
    Tsao, Yu-Ching
    ;
    Tai, Mao-Chou
    ;
    Tsai, Yu-Lin
    Degradation in low-temperature polycrystalline-silicon thin-film transistors after electrical stress was thoroughly investigated in this work. Main channel degradation, abnormal hump generation and hysteresis appearing in the hump region can be observed after positive bias stress. Furthermore, the difference in subthreshold swing (SS) values between forward/reverse sweep is observed. The electron trapping into the gate insulator (GI) dominates the main degradation and the hump generation. Additionally, the difference in SS values which appears in the hump region is attributed to the interface traps and the hysteresis is caused by electron trapping/detrapping into GI.
  • Thumbnail Image
    Item type:Item,
    Effect of ELA Energy Density on Self-Heating Stress in Low-Temperature Polycrystalline Silicon Thin-Film Transistors
    (2020-08-01)
    Huang, Shin-Ping
    ;
    Chen, Hong-Chih
    ;
    Chen, Po-Hsun
    ;
    Zheng, Yu-Zhe
    ;
    Chu, Ann-Kuo
    The extent of the poly-silicon crystalline protrusion, a result of differences in excimer laser annealing (ELA), affects the performance and reliability of thin-film transistors (TFTs). This study investigates the degradation mechanism of the low-temperature polycrystalline silicon (LTPS) TFT devices with differences in crystalline protrusion under self-heating stress (SHS). Higher ELA energy will induce higher protrusion height in the interface between the poly-silicon and gate insulator (GI). This surface morphology leads to serious charge trapping into the GI layers; in contrast, the smallest degradation after SHS can be seen in the devices with the lowest protrusion height. This indicates that the degradation is caused by the surface morphology between the poly-Si and GI interface. In addition, the COMSOL simulation results confirm that the large electric field in the GI layer appears in the rough surface morphology devices; therefore, choosing the appropriate ELA energy of the poly-Si is beneficial for the applications of the driving TFT in organic light-emitting diode (OLED) display in the manufacturing industry.
  • Thumbnail Image
    Item type:Item,
    A Novel Structure to Reduce Degradation Under Mechanical Bending in Foldable Low Temperature Polysilicon TFTs Fabricated on Polyimide
    (2020-05-01)
    Wang, Yu-Xuan
    ;
    Chang, Ting-Chang
    ;
    Huang, Shin-Ping
    ;
    Tai, Mao-Chou
    ;
    Zheng, Yu-Zhe
    In this study, a novel structural device, named as a wing-shaped TFT, is proposed and is demonstrated to prevent fast deterioration under mechanical bending in foldable devices. After long-term mechanical bending, standard low-temperature polysilicon TFTs exhibit instability behaviors such as sub-channel formation, serious threshold voltage shifts, an on-current (I-ON) increase, and an off-current (I-OFF) decrease. These phenomena are believed to be due to additional oxide traps along the channel-width edges of the gate insulator after bending. In order to suppress this degradation, a wing-shaped structure is proposed. By extending the active layer, degradation regions are shifted away from the main channel. Therefore, the reliability of the devices is enhanced. The transfer characteristics show enhanced electrical behavior after being held for 48 hours in a static bent condition, with an 88% drop in threshold voltage shift as well as a 55% decrease in subthreshold swing degradation, proving better durability of the foldable TFT to bending stress for devices with these wings. Time-dependent transfer characteristics, a COMSOL simulation, and device geometry are discussed to support our findings.
  • Thumbnail Image
    Item type:Item,
    Enhancement of Mechanical Bending Stress Endurance Using an Organic Trench Structure in Foldable Polycrystalline Silicon TFTs
    (2020-05-01)
    Zheng, Yu-Zhe
    ;
    Huang, Shin-Ping
    ;
    Chen, Po-Hsun
    ;
    Chang, Ting-Chang
    ;
    Tsai, Tsung-Ming
    This letter proposes a new organic trench structure which can enhance the endurance of polycrystalline silicon thin film transistors (TFTs) under mechanical bending stress. It compares conventional structure TFTs to devices with an organic trench to examine reliability after undergoing 100,000 iterations of channel width-axis (100,000'WC) compression at R = 2mm. Due to the low Young's modulus of organic materials, stress while undergoing bending strain is desorbed to the buffer layer, which can lower the overall stress in TFTs. Furthermore, an optimal location and ideal length for such an organic trench is evaluated by mechanical bending simulation.
  • Thumbnail Image
    Item type:Item,
    Analysis of Negative Bias Temperature Instability Degradation in p-Type Low-Temperature Polycrystalline Silicon Thin-Film Transistors of Different Grain Sizes
    (2019-11-01)
    Tu, Hong-Yi
    ;
    Tsao, Yu-Ching
    ;
    Tai, Mao-Chou
    ;
    Chang, Ting-Chang
    ;
    Tsai, Yu-Lin
    This letter investigates degradation after negative bias temperature instability (NBTI) stress applied to LTPS TFTs with different polycrystalline-silicon grain sizes. The initial characteristics of the LTPS TFTs are similar regardless of grain size; however, we observed a different degree of degradation after NBTI depending on grain size. In general, after NBTI, both grain boundary traps and interface traps were generated. We found that the degree of NBTI degradation is dominated by the concentration of grain boundary traps, which themselves are a result of the different grain sizes that occur due to excimer laser annealing energy. At initial, dangling bonds in the grain boundaries and at the interface are passivated by hydrogen atoms, hence the initial characteristics are similar. Since the large grain of poly-Si initially generates more dangling bonds in the grain boundaries, after NBTI, hydrogen depassivation generates more grain boundary traps and causes much more serious degradation in device performance.
  • Thumbnail Image
    Item type:Item,
    Abnormal C-V Hump Effect Induced by Hot Carriers in Gate Length-Dependent p-Type LTPS TFTs
    (2019-11-01)
    Huang, Shin-Ping
    ;
    Chen, Po-Hsun
    ;
    Tsao, Yu-Ching
    ;
    Chen, Hong-Chih
    ;
    Zheng, Yu-Zhe
    We investigate the abnormal current-voltage (C-V) hump effect of p-type low-temperature polysilicon (LTPS) thin-film transistors (TFTs) which have undergone high current operations. Experimental results indicate localized electron trapping in the gate insulator (GI), which is carried out near the drain. The ON-current ( ${I}_{ \mathrm{\scriptscriptstyle ON}}$ ) enhancement is due to the reduction of effective length, and the OFF-current ( ${I}_{ \mathrm{\scriptscriptstyle OFF}}$ ) decrease as the electron tunneling path distance increases. These can be observed after hot carrier stress in current characteristics. The C-V measurements demonstrate that the threshold voltage ( ${V}_{\text {th}}$ ) shift is associated with the gate length. In addition, capacitance-voltage measurements also show that this localized trapping region remains the same in length, regardless of channel length. Hence, a model is proposed to explain how the electric field, which is gate length-dependent, affects the source side of the device, and then lowers the source barrier height. This leads to bulk leakage, which causes the subthreshold swing degradation at device scale down.
  • Thumbnail Image
    Item type:Item,
    Investigation of the Capacitance-Voltage Electrical Characteristics of Thin-Film Transistors Caused by Hydrogen Diffusion under Negative Bias Stress in a Moist Environment
    (2019-10-30)
    Chen, Hong-Chih
    ;
    Kuo, Chuan-Wei
    ;
    Chang, Ting-Chang
    ;
    Lai, Wei-Chih
    ;
    Chen, Po-Hsun
    In this study, the impact of moisture on the electrical characteristics of an amorphous In-Ga-Zn-O thin-film transistor (a-IGZO TFT) was investigated. In commercial applications of such TFTs, high stability and quality performance in humid environments are essential. During TFT operation under ambient moisture, the electrolysis of water molecules occurs via the tip electric field effect. Hydrogen diffuses from the etch-stop layer or back-channel into the main channel under a negative electric field. The hydrogen atoms act as shallow donors (which causes the carrier concentration in the channel to rise), causing the threshold voltage (V-TH) to shift in the negative direction. Hydrogen diffusion from the overlap of the source/drain and gate electrodes to the channel center caused by the tip electric field induces a significant barrier lowering and V-TH shifts in a short-channel device. However, under negative bias stress (NBS) in ambient moisture, the negative V-TH shift is more obvious in short- than in long-channel devices, indicating suppressed hydrogen diffusion in long-channel devices. This is attributed to the electrolysis of water by the tip electric field at the source, drain, and gate electrodes, which causes hydrogen to diffuse to the center of the channel. Here, a novel physical model of the capacitance-voltage (C-V) electrical property changes under ambient moisture is proposed, based on the early appearance of abnormalities in the C-V measurements. The electrolysis of water caused by the tip electric field and electrical abnormalities caused by hydrogen diffusion into the a-IGZO active layer are explained by this model. A secondary-ion mass spectrometry analysis shows that hydrogen content in the channel generally increases under NBS in ambient moisture. The degradation behavior due to moisture in a-IGZO is clarified. Thus, inhibiting the tip electric field may benefit future flexible-display and gas-sensing applications.
  • Thumbnail Image
    Item type:Item,
    Investigation of the forming process under UV illumination in HfO2-based resistance random access memory with a transparent electrode
    (2020-01-09)
    Huang, Wei-Chen
    ;
    Huang, Shin-Ping
    ;
    Chen, Po-Hsun
    ;
    Chen, Min-Chen
    ;
    Chang, Ting-Chang
    Traditionally, metal is used for the top electrode (TE) in HfO2-based resistance random access memory. When transparent indium-tin-oxide (ITO) is used as the TE, different forming processes, including lower forming voltages and higher forming currents, are exhibited. This work investigates the forming process with such a transparent TE under UV illumination. In addition, different TE thicknesses and device cell sizes are also investigated to confirm the results. Finally, a possible conduction model is provided to explain the mechanisms under UV-light illumination for the transparent TE during the forming process.
  • Thumbnail Image
    Item type:Item,
    Impact of Dehydrogenation Annealing Process Temperature on Reliability of Polycrystalline Silicon Thin Film Transistors
    (2019-10-01)
    Huang, Shin-Ping
    ;
    Chen, Po-Hsun
    ;
    Chen, Hong-Chih
    ;
    Zheng, Yu-Zhe
    ;
    Chu, Ann-Kuo
    This letter investigates variations in polycrystalline silicon thin film transistor (TFT) performance under illumination and negative bias temperature instability (NBTI) tests due to different dehydrogenation annealing temperatures during the fabrication process. The depth of the density of state (DOS) in polysilicon can be indirectly determined by the TFT response to light illumination, since dangling bonds act as recombination centers. The electrical characteristics of TFTs after undergoing NBTI can also be indicative of the bonding type of silicon atoms. By analyzing the results of these reliability tests, the type of DOS can be clarified, which is beneficial for realizing the relationship between performance and reliability.