學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 16

Study of Plasmonic Nanolasers with Graphene-Metal Interaction
(2019-01-01)
Chung, Yi-Cheng
;
Li, Heng
;
Lu, Tien-Chang
;
Chen, Kuo-Ping
;
Lin, Tzy-Rong
The charge transfer effect of the graphene-oxide-metal interface on the performance of plasmonic nanolasers was investigated. The results show that the variation of electron densities of metals can influence the characteristics of surface-plasmon-polariton modes and lead to a significant improvement in the performance of plasmonic nanolasers.
Graphene-Loaded Plasmonic Zirconium Nitride and Gold Nanogroove Arrays for Surface-Charge Modifications
(2020-06-26)
Yu, Min-Wen
;
Ishii, Satoshi
;
Ku, Ji-Ren
;
Yang, Jhen-Hong
;
Huang, Chih-Hsiang
Graphene-on-metal (G/M) heterostructures have gained considerable attention in recent years owing to their outstanding optical and electrical properties. In this study, the polarity of graphene doping to different metallic materials underneath graphene is analyzed for applications in surface-charge modifications. Kelvin probe force microscopy clearly reveals the charge-transfer effects of plasmonic zirconium nitride (ZrN) and gold (Au) on the formation of G/M heterostructures. In addition, both ZrN and Au nanogroove arrays are fabricated by focused ion beam to generate surface plasmon resonances. The charge-transfer effects influence the effective permittivities of ZrN and Au surfaces such that opposite plasmonic resonance shifts are demonstrated for the ZrN and Au nanogroove arrays. Our results show that the choice of metallic material is important for achieving a desired charge transfer in the loading of graphene onto metallic materials.
Structural Colors Enabled by Lattice Resonance on Silicon Nitride Metasurfaces
(2020-05-26)
Yang, Jhen-Hong
;
Babicheva, Viktoriia E.
;
Yu, Min-Wen
;
Lu, Tien-Chang
;
Lin, Tzy-Rong
Artificial color pixels based on dielectric Mie resonators are appealing for scientific research as well as practical design. Vivid colors are imperative for displays and imaging. Dielectric metasurface-based artificial pixels are promising candidates for developing flat, flexible, and/or wearable displays. Considering the application feasibility of artificial color pixels, wide color gamuts are crucial for contemporary display technology. To achieve a wide color gamut, ensuring the purity and efficiency of nanostructure resonance peaks in the visible spectrum is necessary for structural color design. Low-loss dielectric materials are suitable for achieving vivid colors with structural color pixels. However, high-order Mie resonances prevent color pixels based on dielectric metasurfaces from efficiently generating highly saturated colors. In particular, fundamental Mie resonances (electric/magnetic dipole) for red can result in not only a strong resonance peak at 650 nm but also high-order Mie resonances at shorter wavelengths, which reduces the saturation of the target color. To address these problems, we fabricated silicon nitride metasurfaces on quartz substrates and applied Rayleigh anomalies at relatively short wavelengths to successfully suppress high-order Mie resonances, thus creating vivid color pixels. We performed numerical design, semianalytic considerations, and experimental proof-of-concept examinations to demonstrate the performance of the silicon nitride metasurfaces. Apart from traditional metasurface designs that involve transmission and reflection modes, we determined that lateral light incidence on silicon nitride metasurfaces can provide vivid colors through long-range dipole interactions; this can thus extend the applications of such surfaces to eyewear displays and guided-wave illumination techniques.
Full-Spectrum Analysis of Perovskite-Based Surface Plasmon Nanolasers
(2020-03-29)
Cheng, Pi-Ju
;
Zheng, Qi-Yan
;
Hsu, Chu-Yuan
;
Li, Heng
;
Hong, Kuo-Bin
We systematically studied the characteristics of hybrid perovskite-based surface plasmon nanolasers. If one changes the anion composition of perovskites, the emission wavelength can be easily tuned. We conducted in full-spectrum modeling that featured hybrid perovskite nanowires placed on different SiO2-coated metallic (Au, Ag, and Al) plates. The proposed nanocavities that supported plasmonic gap modes exhibited distinguished properties of nanolasers, such as low-transparency threshold-gain and low lasing threshold. The corresponding experimental results for the MAPbBr(3) nanolaser on Ag revealed the low-threshold operation. These superior features were attributed to enhanced light-matter interaction with strong coupling. Therefore, the proposed scheme, integrated with hybrid perovskite as gain material, provides an excellent platform for nanoscale plasmon lasing in the visible to near-infrared spectra.
Plasmonic Nanolasers Enhanced by Hybrid Graphene-Insulator-Metal Structures
(2019-08-01)
Li, Heng
;
Li, Jhu-Hong
;
Hong, Kuo-Bin
;
Yu, Min-Wen
;
Chun, Yi-Cheng
Graphene is a two-dimensional (2D) structure that creates a linear relationship between energy and momentum that not only forms massless Dirac fermions with extremely high group velocity but also exhibits a broadband transmission from 300 to 2500 nm that can be applied to many optoelectronic applications, such as solar cells, light-emitting devices, touchscreens, ultrafast photodetectors, and lasers. Although the plasmonic resonance of graphene occurs in the terahertz band, graphene can be combined with a noble metal to provide a versatile platform for supporting surface plasmon waves. In this study, we propose a hybrid graphene-insulator-metal (GIM) structure that can modulate the surface plasmon polariton (SPP) dispersion characteristics and thus influence the performance of plasmonic nanolasers. Compared with values obtained when graphene is not used on an Al template, the propagation length of SPP waves can be increased 2-fold, and the threshold of nanolasers is reduced by 50% when graphene is incorporated on the template. The GIM structure can be further applied in the future to realize electrical control or electrical injection of plasmonic devices through graphene.
High-Performance Plasmonic Nanolasers with a Nanotrench Defect Cavity for Sensing Applications
(2018-07-01)
Cheng, Pi-Ju
;
Huang, Zhen-Ting
;
Li, Jhu-Hong
;
Chou, Bo-Tsun
;
Chou, Yu-Hsun
Recent developments in small footprint plasmonic nanolasers show promise for active optical sensing with potential applications in various fields, including real-time and label-free biochemical sensing, and gas detection. In this study, we demonstrate a novel hybrid plasmonic crystal nanolaser that features a ZnO nanowire placed on Al grating surfaces with a nanotrench defect nanocavity. The lasing action of gain-assisted defect nanocavity overcomes the ohmic loss parasitically in the plasmonic nanostructures. Therefore, the plasmonic nanolaser exhibits an extremely small mode volume, a narrow linewidth Delta lambda, and a high Purcell factor that can facilitate the strong interaction between light and matter. This can be used as a refractive index sensor and is highly sensitive to local changes in the refractive indices of ambient materials. By careful design, the near-ultraviolet nanolaser sensors have significant sensing performances of glucose solutions, revealing a high sensitivity of 249 nm/RIU and high resolution, with a figure of merit of 1132, at the resonant wavelength of 373 nm.
Surface plasmon polariton nanolasers: Coherent light sources for new applications
(2018-11-01)
Chou, Yu-Hsun
;
Chang, Chia-Jui
;
Lin, Tzy-Rong
;
Lu, Tien-Chang
;
光電工程學系
The invention of the Internet and mobile devices has caused tremendous changes in human lives over the past two decades. Information technology has broken through limitations of geospatial space, enabling extremely high-speed data transmission and new types of data services. In recent years, demands for data processing have shown an increasing trend. Furthermore, data generated from internet-related applications such as cloud services and self-driving technology are likely to grow exponentially over the coming years. Currently, data transmission inside integrated circuits mainly relies on metal wires. However, the substantial resistive-capacitive delay and energy loss that are caused by metal wires limit data transmission speeds. Optical interconnection has been regarded as a major solution to efficiently reduce energy consumption and increase data transmission speeds. The size of conventional semiconductor laser devices, which are the key component in optical interconnection, cannot be smaller than the wavelength of light, which is a fundamental physical obstacle to lasers integrating with current electronic integrated circuits in reasonable volumes. To realize optical interconnection, the volume of the laser device must match the existing electronic components. Recently, the use of diffraction-unlimited plasmonic lasers has been successfully demonstrated, and these have great potential in different applications. In this paper, we discuss the recent progress toward surface plasmon polariton lasers and provide practical insights into the challenges in realizing these novel devices.
Tuning the Characteristics of Surface Plasmon Polariton Nanolasers by Tailoring the Dispersion Relation
(2017-01-01)
Lu, Tien-Chang
;
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chung, Yi-Cheng
;
Lin, Tzy-Rong
Nanolasers with ultra-compact footprint are able to provide high intensity coherent light, which have various potential applications in high capacity signal processing, biosensing, and sub-wavelength imaging. Among various nanolasers, those lasers with cavities surrounded with metals have shown to have superior light emission properties due to the surface plasmon effect providing better field confinement capability and allowing exotic light-matter interaction. In this talk, we report robust ultraviolet ZnO nanolaser by using silver (Ag) [1] and aluminum (Al) [2] to strongly shrink the mode volume. The nanolasers operated at room temperature and even high temperature (353K) shows several distinct features including an extremely small mode volume, large Purcell factor and group index. Comparison of characteristics between Ag-and Al-based will also be made.
Metal for Plasmonic Ultraviolet Laser: Al or Ag?
(2017-11-01)
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chung, Yi-Cheng
;
Chang, Chun-Tse
;
Chou, Bo-Tsun
Surface plasmon polariton (SPP) nanolasers have recently emerged as promising candidates for generating a coherent light source in nanophotonic integration circuits. The properties of SPP nanolasers, such as group velocity, mode area, modulation speed, and threshold performance, can be manipulated using a dispersion relation. In this study, we investigated the characteristics of SPP nanolasers operated near and far from the SP frequency. Our results indicated that SPP nanolaser performance can be significantly influenced by manipulating the dispersion relation.
Ultracompact Pseudowedge Plasmonic Lasers and Laser Arrays
(2018-02-01)
Chou, Yu-Hsun
;
Hong, Kuo-Bin
;
Chang, Chun-Tse
;
Chang, Tsu-Chi
;
Huang, Zhen-Ting
Concentrating light at the deep subwavelength scale by utilizing plasmonic effects has been reported in various optoelectronic devices with intriguing phenomena and functionality. Plasmonic waveguides with a planar structure exhibit a two-dimensional degree of freedom for the surface plasmon; the degree of freedom can be further reduced by utilizing metallic nanostructures or nanoparticles for surface plasmon resonance. Reduction leads to different lightwave confinement capabilities, which can be utilized to construct plasmonic nanolaser cavities. However, most theoretical and experimental research efforts have focused on planar surface plasmon polariton (SPP) nanolasers. In this study, we combined nanometallic structures intersecting with ZnO nanowires and realized the first laser emission based on pseudowedge SPP waveguides. Relative to current plasmonic nanolasers, the pseudowedge plasmonic lasers reported in our study exhibit extremely small mode volumes, high group indices, high spontaneous emission factors, and high Purell factors beneficial for the strong interaction between light and matter. Furthermore, we demonstrated that compact plasmonic laser arrays can be constructed, which could benefit integrated plasmonic circuits.

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results