🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 5 of 5

Investigations of GaN growth on the sapphire substrate by MOCVD method with different AlN buffer deposition temperatures
(2016-04)
Huang, Wei-Ching
;
Chu, Chung-Ming
;
Wong, Yuen Yee
;
Chen, Kai-Wei
;
Lin, Yen-Ku
The effects of different AlN buffer deposition temperatures on the GaN material properties grown on sapphire substrate was investigated. At relatively higher AlN buffer growth temperature, the surface morphology of subsequent grown GaN layer was decorated with island-like structure and revealed the mixed-polarity characteristics. In addition, the density of screw TD and leakage current in the GaN film was also increased. The occurrence of mixed-polarity GaN material result could be from unintentional nitridation of the sapphire substrate by ammonia (NH3) precursor at the beginning of the AlN buffer layer growth. By using two-step temperature growth process for the buffer layer, the unintentional nitridation could be effectively suppressed. The GaN film grown on this buffer layer exhibited a smooth surface, single polarity, high crystalline quality and high resistivity. AlGaN/GaN high electron-mobility transistor (HEMT) devices were also successfully fabricated by using the two-step AlN buffer layer. (C) 2016 Elsevier Ltd. All rights reserved.
Growth of GaN films on circle array patterned Si (111) substrates
(2014-09-01)
Lin, Kung-Liang
;
Binh Tinh Tran
;
Chung, Chen-Chen
;
Chang, Edward-Yi
;
材料科學與工程學系
Low stress, low defect density GaN was successfully grown on circle array patterned Si (111) substrate using AlN as the buffer followed by two steps growth of the GaN film. Raman measurement shows a reduction of in plane biaxial stress for the GaN film grown on patterned substrate. The slight blueshifL of PL peaks further provides evidence that the tensile stress in the GaN film was relaxed, It is believed that the grain boundaries of the polycrystalline AlN buffer layer and the dislocations in the GaN film grown helped to relieve the stress induced by the lattice and the thermal coefficient mismatches during growth. (C) 2014 Elsevier By. All rights reserved.
Characterization of AlInN Layer Grown on GaN/Sapphire Substrate by MOCVD
(2013-02-01)
Huang, Wei-Ching
;
Chang, Edward-Yi
;
Wong, Yuen-Yee
;
Lin, Kung-Liang
;
Hsiao, Yu-Lin
The AlInN layers have been grown with different growth parameters on GaN/sapphire substrates by metal-organic chemical vapor deposition (MOCVD). The effects of growth parameters such as pressure and temperature on the Al incorporation during AlInN material growth have been investigated. The results showed that lower pressure provides a tendency for higher Al incorporating in the AlInN layer. Besides, as the temperature was increased from 700 degrees C to 780 degrees C, an estimation of 4% reduction on the indium composition has been observed for each 20 degrees C increment. XRD analysis showed that the best crystal quality of AlInN occured at 80% Al composition because of the higher lattice matching with GaN. Based on the above criteria, an Al0.8In0.2N/GaN HEMT device with 2 mu m gate length has also been fabricated. The DC characteristics showed a saturated current, I-dss of 280 mA/mm and transconductance of 140 mS/mm.
Fabrication and characterization of n-In0.4Ga0.6N/p-Si solar cell
(2012-07-01)
Tran, Binh-Tinh
;
Chang, Edward-Yi
;
Trinh, Hai-Dang
;
Lee, Ching-Ting
;
Sahoo, Kartika Chandra
Electro-optic characteristics of a fabricated n-In0.4Ga0.6N/p-Si hetero-structure solar cell on Si substrate with Al and ITO (or Ti/Al/Ni/Au) materials for p and n-type contacts were investigated in this letter. The solar cell devices with ITO as n-type contacts were also compared to the solar cell using Ti/Al/Ni/Au as n-type contact in this study. High short-circuit current density observed for solar cell with ITO as n-type contacts due to the increased amount of light reaching the solar cell. The device with ITO contact exhibited an open-circuit voltage (V-oc) of 1.52 V and a short-circuit current density (J(sc)) of 8.68 mA/cm(2) with 54% fill factor. The conversion and external quantum efficiency (EQE) of the solar cell were 7.12 and 20.8%, respectively. Besides, a relationship between V-oc and In content in the InxGa1-xN alloys for this type of solar cell was also derived. (C) 2012 Elsevier B.V. All rights reserved.
Effects of Al(x)Ga(1-x)N interlayer for GaN epilayer grown on Si substrate by metal-organic chemical-vapor deposition
(2010-05-01)
Lin, Kung-Liang
;
Chang, Edward-Yi
;
Hsiao, Yu-Lin
;
Huang, Wei-Ching
;
Luong, Tien-Tung
GaN film grown on Si substrate using multilayer AlN/Al(x)Ga(1-x)N buffer is studied by the low-pressure metal-organic chemical-vapor deposition method. The Al(x)Ga(1-x)N films with Al composition varying from 1 to 0.66 were used to accommodate the stress induced between GaN and the Si substrate during GaN growth. The correlation of the Al composition in the Al(x)Ga(1-x)N films with respect to the stress induced in the GaN film grown was studied using high-resolution x-ray diffraction, including symmetrical and asymmetrical omega/2 theta scans and reciprocal space maps. It is found that with proper design of the Al composition in the Al(x)Ga(1-x)N buffer layer, crack-free GaN film can be successfully grown on 6 in. Si (111) substrates using multilayer AlN and Al(x)Ga(1-x)N buffer layers. (C) 2010 American Vacuum Society. [DOI: 10.1116/1.3385672]

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results