學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 50

Resonant-enhanced full-color emission of quantum-dot-based micro LED display technology
(2015-12-14)
Han, Hau-Vei
;
Lin, Huang-Yu
;
Lin, Chien-Chung
;
Chong, Wing-Cheung
;
Li, Jie-Ru
Colloidal quantum dots which can emit red, green, and blue colors are incorporated with a micro-LED array to demonstrate a feasible choice for future display technology. The pitch of the micro-LED array is 40 mu m, which is sufficient for high-resolution screen applications. The method that was used to spray the quantum dots in such tight space is called Aerosol Jet technology which uses atomizer and gas flow control to obtain uniform and controlled narrow spots. The ultra-violet LEDs are used in the array to excite the red, green and blue quantum dots on the top surface. To increase the utilization of the UV photons, a layer of distributed Bragg reflector was laid down on the device to reflect most of the leaked UV photons back to the quantum dot layers. With this mechanism, the enhanced luminous flux is 194% (blue), 173% (green) and 183% (red) more than that of the samples without the reflector. The luminous efficacy of radiation (LER) was measured under various currents and a value of 165 lm/Watt was recorded. (C)2015 Optical Society of America
Improvement of light quality by ZrO2 film of chip on glass structure white LED
(2016-01-25)
Lin, Huang-Yu
;
Ye, Zhi-Ting
;
Lin, Chien-Chung
;
Chen, Kuo-Ju
;
Tu, Hsien-Hao
A novel combination of blue LED chips, transparent glass substrates and phosphors with PDMS thin film is demonstrated. The flip-chip bonding technology is applied to facilitate this design. The ZrO2 nanoparticles are also doped into the PDMS film to increase light scattering. The resultant luminous efficiency shows an 11% enhancement when compared to the regular COG device. The variation of correlated color temperature of such devices is also reduced to 132K. In addition to these changes, the surface temperature is reduced from 121 degrees C to 104 degrees C due to good thermal dissipation brought by ZrO2 nanoparticles. (C) 2015 Optical Society of America
A Highly Efficient Hybrid GaAs Solar Cell Based on Colloidal-Quantum-Dot-Sensitization
(2014-07-18)
Han, Hau-Vei
;
Lin, Chien-Chung
;
Tsai, Yu-Lin
;
Chen, Hsin-Chu
;
Chen, Kuo-Ju
This paper presents a hybrid design, featuring a traditional GaAs-based solar cell combined with various colloidal quantum dots. This hybrid design effectively boosts photon harvesting at long wavelengths while enhancing the collection of photogenerated carriers in the ultraviolet region. The merits of using highly efficient semiconductor solar cells and colloidal quantum dots were seamlessly combined to increase overall power conversion efficiency. Several photovoltaic parameters, including short-circuit current density, open circuit voltage, and external quantum efficiency, were measured and analyzed to investigate the performance of this hybrid device. Offering antireflective features at long wavelengths and luminescent downshifting for high-energy photons, the quantum dots effectively enhanced overall power conversion efficiency by as high as 24.65% compared with traditional GaAs-based devices. The evolution of weighted reflectance as a function of the dilution factor of QDs was investigated. Further analysis of the quantum efficiency response showed that the luminescent downshifting effect can be as much as 6.6% of the entire enhancement of photogenerated current.
High thermal stability of correlated color temperature using current compensation in hybrid warm white high-voltage LEDs
(2013-03-11)
Chen, Kuo-Ju
;
Kuo, Hsuan-Ting
;
Chen, Hsin-Chu
;
Shih, Min-Hsiung
;
Wang, Chao-Hsun
This study experimentally and numerically examines the correlated color temperature (CCT) stability issue for hybrid warm white high-voltage light-emitting diodes (HV-LEDs) by using a current compensation method. This method could efficiently maintain the CCT stability factor at approximately 1.0 and yield greater color uniformity with Delta u'v' values ranging from 0.017 to 0.003 in CIE 1976 chromaticity coordinates. The simulation results show that the red chip intensity drop is the primary cause of CCT instability in the hybrid warm white system when the temperature increases. Therefore, Furthermore, results indicate that the relative lumen drop improves from 21% to 15% by using a current compensation method. (c) 2013 Optical Society of America
Optimized Spiral Metal-Gallium-Nitride Nanowire Cavity for Ultra-High Circular Dichroism Ultraviolet Lasing at Room Temperature
(2016-05-25)
Liao, Wei-Chun
;
Liao, Shu-Wei
;
Chen, Kuo-Ju
;
Hsiao, Yu-Hao
;
Chang, Shu-Wei
Circularly polarized laser sources with small footprints and high efficiencies can possess advanced functionalities in optical communication and biophotonic integrated systems. However, the conventional lasers with additional circular-polarization converters are bulky and hardly compatible with nanophotonic circuits, and most active chiral plasmonic nanostructures nowadays exhibit broadband emission and low circular dichroism. In this work, with spirals of gallium nitride (GaN) nanowires (NWRs) covered by a metal layer, we demonstrated an ultrasmall semiconductor laser capable of emitting circularly-polarized photons. The left-and right-hand spiral metal nanowire cavities with varied periods were designed at ultraviolet wavelengths to achieve the high quality factor circular dichroism metastructures. The dissymmetry factors characterizing the degrees of circular polarizations of the left-and right-hand chiral lasers were 1.4 and -1.6 (+/- 2 if perfectly circular polarized), respectively. The results show that the chiral cavities with only 5 spiral periods can achieve lasing signals with the high degrees of circular polarizations.
Pulsed-laser micropatterned quantum-dot array for white light source
(2016-03-23)
Wang, Sheng-Wen
;
Lin, Huang-Yu
;
Lin, Chien-Chung
;
Kao, Tsung Sheng
;
Chen, Kuo-Ju
In this study, a novel photoluminescent quantum dots device with laser-processed microscale patterns has been demonstrated to be used as a white light emitting source. The pulsed laser ablation technique was employed to directly fabricate microscale square holes with nano-ripple structures onto the sapphire substrate of a flip-chip blue light-emitting diode, confining sprayed quantum dots into well-defined areas and eliminating the coffee ring effect. The electroluminescence characterizations showed that the white light emission from the developed photoluminescent quantum-dot light-emitting diode exhibits stable emission at different driving currents. With a flexibility of controlling the quantum dots proportions in the patterned square holes, our developed white-light emitting source not only can be employed in the display applications with color triangle enlarged by 47% compared with the NTSC standard, but also provide the great potential in future lighting industry with the correlated color temperature continuously changed in a wide range.
Improvement of light quality by DBR structure in white LED
(2015-02-09)
Lin, Huang-Yu
;
Chen, Kuo-Ju
;
Wang, Sheng-Wen
;
Lin, Chien-Chung
;
Wang, Kuan-Yu
This study demonstrates the application of DBR structure into the remote phosphor structure to improve the angular correlated color temperature (CCT) deviation in white light-emitting diodes (WLEDs). In the experiment, the LED device with DBR structure yielded a higher luminous efficiency than a conventional structure. The CCT deviation can be improved from 1758K to 280K in a range of -70 to 70 degree and the luminous flux increases more than 10% due to the enhancement of the light extraction of the blue light. Moreover, the reflectance of the different DBR structures is analyzed with different angles to reveal the reasons of such improvements. As the result, this LED device with DBR structure shows the great potential to use as the next generation lighting source. (C) 2014 Optical Society of America
Luminous efficiency enhancement of white light-emitting diodes by using a hybrid phosphor structure
(2015-02-19)
Lin, Bing-Cheng
;
Huang, Jhih-Kai
;
Chen, Kuo-Ju
;
Chiu, Sheng-Huan
;
Tu, Zong-Yi
This paper presents a "hybrid" structure for the coating of yellow YAG: Ce3(+) phosphor on blue GaN-based light-emitting diodes (LEDs). The luminous efficiency of the hybrid phosphor structure improved by 5.9% and 11.7%, compared with the conventional remote and conformal phosphor structures, respectively, because of the increased intensity of the yellow component. The hybrid structure also has an advantage in the phosphor usage reduction for the LEDs. Furthermore, the electric intensity of the hybrid phosphor structure was calculated for various thicknesses by conducting TFCalc32 simulation, and the enhanced utilization of blue rays was verified. Finally, the experimental results were consistent with the simulation results performed using the Monte-Carlo method. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
High-efficiency and low assembly-dependent chip-scale package for white light-emitting diodes
(2015-04-21)
Huang, Che-Hsuan
;
Chen, Kuo-Ju
;
Tsai, Ming-Ta
;
Shih, Min-Hsiung
;
Sun, Chia-Wei
This article presents a chip-scale package (CSP) with conformal and uniform structures for white light-emitting diodes used in lighting and backlight unit (BLU) applications. The CSP structures produce higher light extraction efficiency and lower assembly-dependent packaging compared with conventional surface-mounted devices (SMDs). Simulation results show that compared with SMDs, the luminous efficiency of CSP structures is 8.81% higher in lighting applications and 9.43% higher in BLU applications. This is likely due to light loss in the light bowl of the SMDs. Moreover, CSPs with a conformal phosphor structure exhibit low assembly dependence and redundancy, and rb-CSPs with a conformal structure are a more effective light source in both lighting and BLU applications. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
Efficient hybrid white light-emitting diodes by organic-inorganic materials at different CCT from 3000K to 9000K
(2015-04-06)
Chen, Kuo-Ju
;
Lai, Yi-Chun
;
Lin, Bin-Cheng
;
Lin, Chien-Chung
;
Chiu, Sheng-Huan
The hybrid white light-emitting didoes (LED) with polyfluoren (PFO) polymer and quantum dot (QD) was investigated using dispensing method at the different correlated color temperature (CCT) for cool and warm color temperature. This result indicates that the hybrid white LED device has the higher luminous efficiency than the convention one, which could be attributed to the increased utilization rate of the UV light. Furthermore, the CIE 1931 coordinate of high quality white hybrid LED with different CCT range from 3000K to 9000K is demonstrated. Consequently, the angular-dependent CCT and the thermal issue of the hybrid white LED device were also analyzed in this study. (C) 2015 Optical Society of America

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results