學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 35

Micro-light-emitting diodes with quantum dots in display technology
(2020-05-11)
Liu, Zhaojun
;
Lin, Chun-Ho
;
Hyun, Byung-Ryool
;
Sher, Chin-Wei
;
Lv, Zhijian
Micro-light-emitting diodes (mu-LEDs) are regarded as the cornerstone of next-generation display technology to meet the personalised demands of advanced applications, such as mobile phones, wearable watches, virtual/augmented reality, micro-projectors and ultrahigh-definition TVs. However, as the LED chip size shrinks to below 20 mu m, conventional phosphor colour conversion cannot present sufficient luminance and yield to support high-resolution displays due to the low absorption cross-section. The emergence of quantum dot (QD) materials is expected to fill this gap due to their remarkable photoluminescence, narrow bandwidth emission, colour tuneability, high quantum yield and nanoscale size, providing a powerful full-colour solution for mu-LED displays. Here, we comprehensively review the latest progress concerning the implementation of mu-LEDs and QDs in display technology, including mu-LED design and fabrication, large-scale mu-LED transfer and QD full-colour strategy. Outlooks on QD stability, patterning and deposition and challenges of mu-LED displays are also provided. Finally, we discuss the advanced applications of QD-based mu-LED displays, showing the bright future of this technology. Micro-LEDs: A fine display by quantum dots Micrometre-sized light-emitting diodes (LEDs) based on quantum dots (QDs) will propel the next generation of display technologies, a review by leading researchers shows. Conventional LED designs, with phosphor coatings that convert light to different colours, are difficult to make smaller than 20 micrometres. Jr-Hau He at City University of Hong Kong and co-workers explain how this problem can be tackled using QDs, tiny particles whose optical properties can be tuned by varying their size, providing brighter and more precise colours. Ultra-high-resolution displays based on phospholuminescent QD-LEDs are now being released to the market thanks to finely-controlled methods for synthesising QDs and depositing them onto films. Further research should focus on the best ways to stabilise and protect QD films within LEDs, and to continue developing electroluminescent QD-LEDs, which could potentially outperform their phospholuminescent cousins.
Giant Optical Anisotropy of Perovskite Nanowire Array Films
(1970-01-01)
Lin, Chun-Ho
;
Kang, Chieh-Yu
;
Wu, Ting-Zhu
;
Tsai, Chun-Lin
;
Sher, Chin-Wei
Polarizers play a key role in generating polarized light for display, imaging, and data communication, but adoption often suffers from high optical loss. Recently, due to superior optoelectronic properties, halide perovskites have been widely developed for lighting applications; however, highly polarized emission (polarization degree >0.8) has not yet been realized with perovskites. Herein, by incorporating inkjet printing and an anodic aluminum oxide (AAO) confinement strategy, highly ordered perovskite nanowire (NW) arrays are demonstrated for anisotropic optical applications. The optical device based on perovskite NW arrays reveals a high photoluminescence external quantum efficiency of 21.6% and emits highly polarized light with polarization degree up to 0.84. The highly polarized emission from perovskite NW arrays has potential to considerably reduce the optical loss of polarizers, which may attract great interest in developing polarized light sources for next-generation optoelectronic applications.
Thermodynamic Routes to Ultralow Thermal Conductivity and High Thermoelectric Performance
(1970-01-01)
Wei, Pai-Chun
;
Liao, Chien-Neng
;
Wu, Hsin-Jay
;
Yang, Dongwang
;
He, Jian
Thermoelectric (TE) research is not only a course of materials by discovery but also a seedbed of novel concepts and methodologies. Herein, the focus is on recent advances in three emerging paradigms: entropy engineering, phase-boundary mapping, and liquid-like TE materials in the context of thermodynamic routes. Specifically, entropy engineering is underpinned by the core effects of high-entropy alloys; the extended solubility limit, the tendency to form a high-symmetry crystal structure, severe lattice distortions, and sluggish diffusion processes afford large phase space for performance optimization, high electronic-band degeneracy, rich multiscale microstructures, and low lattice thermal conductivity toward higher-performance TE materials. Entropy engineering is successfully implemented in half-Huesler and IV-VI compounds. In Zintl phases and skutterudites, the efficacy of phase-boundary mapping is demonstrated through unraveling the profound relations among chemical compositions, mutual solubilities of constituent elements, phase instability, microstructures, and resulting TE properties at the operation temperatures. Attention is also given to liquid-like TE materials that exhibit lattice thermal conductivity at lower than the amorphous limit due to intensive mobile ion disorder and reduced vibrational entropy. To conclude, an outlook on the development of next-generation TE materials in line with these thermodynamic routes is given.
An efficient and stable photoelectrochemical system with 9% solar-to-hydrogen conversion efficiency via InGaP/GaAs double junction
(2019-11-21)
Varadhan, Purushothaman
;
Fu, Hui-Chun
;
Kao, Yu-Cheng
;
Horng, Ray-Hua
;
He, Jr-Hau
Despite III-V semiconductors demonstrating extraordinary solar-to-hydrogen (STH) conversion efficiencies, high cost and poor stability greatly impede their practical implementation in photoelectrochemical (PEC) water splitting applications. Here, we present a simple and efficient strategy for III-V-based photoelectrodes that functionally and spatially decouples the light harvesting component of the device from the electrolysis part that eliminates parasitic light absorption, reduces the cost, and enhances the stability without any compromise in efficiency. The monolithically integrated PEC cell was fabricated by an epitaxial lift-off and transfer of inversely grown InGaP/GaAs to a robust Ni-substrate and the resultant photoanode exhibits an STH efficiency of similar to 9% with stability similar to 150 h. Moreover, with the ability to access both sides of the device, we constructed a fully-integrated, unassisted-wireless "artificial leaf" system with an STH efficiency of similar to 6%. The excellent efficiency and stability achieved herein are attributed to the light harvesting/catalysis decoupling scheme, which concurrently improves the optical, electrical, and electrocatalytic characteristics.
InN-based heterojunction photodetector with extended infrared response
(2015-11-30)
Hsu, Lung-Hsing
;
Kuo, Chien-Ting
;
Huang, Jhih-Kai
;
Hsu, Shun-Chieh
;
Lee, Hsin-Ying
The combination of ZnO, InN, and GaN epitaxial layers is explored to provide long wavelength photodetection capability in the GaN based materials. Growth temperature optimization was performed to obtain the best quality of InN epitaxial layer in the MOCVD system. The temperature dependent photoluminescence (PL) can provide the information about thermal quenching in the InN PL transitions and at least two non-radiative processes can be observed. X-ray diffraction and energy dispersive spectroscopy are applied to confirm the inclusion of indium and the formation of InN layer. The band alignment of such system shows a typical double heterojunction, which is preferred in optoelectronic device operation. The photodetector manufactured by this ZnO/GaN/InN layer can exhibit extended long-wavelength quantum efficiency, as high as 3.55%, and very strong photocurrent response under solar simulator illumination. (C) 2015 Optical Society of America
Phosphorous Diffuser Diverged Blue Laser Diode for Indoor Lighting and Communication
(2015-12-21)
Chi, Yu-Chieh
;
Hsieh, Dan-Hua
;
Lin, Chung-Yu
;
Chen, Hsiang-Yu
;
Huang, Chia-Yen
An advanced light-fidelity (Li-Fi) system based on the blue Gallium nitride (GaN) laser diode (LD) with a compact white-light phosphorous diffuser is demonstrated for fusing the indoor whitelighting and visible light communication (VLC). The phosphorous diffuser adhered blue GaN LD broadens luminescent spectrum and diverges beam spot to provide ample functionality including the completeness of Li-Fi feature and the quality of white-lighting. The phosphorous diffuser diverged white-light spot covers a radiant angle up to 120 degrees with CIE coordinates of (0.34, 0.37). On the other hand, the degradation on throughput frequency response of the blue LD is mainly attributed to the selffeedback caused by the reflection from the phosphor-air interface. It represents the current state-ofthe- art performance on carrying 5.2-Gbit/s orthogonal frequency-division multiplexed 16-quadratureamplitude modulation (16-QAM OFDM) data with a bit error rate (BER) of 3.1 x 10(-3) over a 60-cm freespace link. This work aims to explore the plausibility of the phosphorous diffuser diverged blue GaN LD for future hybrid white-lighting and VLC systems.
4-Gbit/s visible light communication link based on 16-QAM OFDM transmission over remote phosphor-film converted white light by using blue laser diode
(2015-12-28)
Retamal, Jose Ramon Duran
;
Oubei, Hassan Makine
;
Janjua, Bilal
;
Chi, Yu-Chieh
;
Wang, Huai-Yung
Visible Light Communication (VLC) as a new technology for ultrahigh-speed communication is still limited when using slow modulation light-emitting diode (LED). Alternatively, we present a 4-Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing. By changing the composition and the optical-configuration of a remote phosphor-film the generated white light is tuned from cool day to neutral, and the bit error rate is optimized from 1.9 x 10(-2) to 2.8 x 10(-5) in a blue filter-free link due to enhanced blue light transmission in forward direction. Briefly, blue-LD is an alternative to LED for generating white light and boosting the data rate of VLC. (C) 2015 Optical Society of America
Photostriction of strontium ruthenate
(2017-04-24)
Wei, Tzu-Chiao
;
Wang, Hsin-Ping
;
Liu, Heng-Jui
;
Tsai, Dung-Sheng
;
Ke, Jr-Jian
Transition metal oxides with a perovskite crystal structure exhibit a variety of physical properties associated with the lattice. Among these materials, strontium ruthenate (SrRuO3) displays unusually strong coupling of charge, spin and lattice degrees of freedom that can give rise to the photostriction, that is, changes in the dimensions of material due to the absorption of light. In this study, we observe a photon-induced strain as high as 1.12% in single domain SrRuO3, which we attribute to a nonequilibrium of phonons that are a result of the strong interaction between the crystalline lattice and electrons excited by light. In addition, these light-induced changes in the SrRuO3 lattice affect its electrical resistance. The observation of both photostriction and photoresistance in SrRuO3 suggests the possibility of utilizing the mechanical and optical functionalities of the material for next-generation optoelectronics, such as remote switches, light-controlled elastic micromotors, microactuators and other optomechanical systems.
4.8 Gbit/s 16-QAM-OFDM transmission based on compact 450-nm laser for underwater wireless optical communication
(2015-09-07)
Oubei, Hassan M.
;
Duran, Jose R.
;
Janjua, Bilal
;
Wang, Huai-Yung
;
Tsai, Cheng-Ting
We experimentally demonstrate an underwater wireless optical communications (UWOC) employing 450-nm TO-9 packaged and fiber-pigtailed laser diode (LD) directly encoded with an orthogonal frequency division multiplexed quadrature amplitude modulation (QAM-OFDM) data. A record data rate of up to 4.8 Gbit/s over 5.4-m transmission distance is achieved. By encoding the full 1.2-GHz bandwidth of the 450-nm LD with a 16-QAM-OFDM data, an error vector magnitude (EVM) of 16.5%, a signal-to-noise ratio (SNR) of 15.63 dB and a bit error rate (BER) of 2.6 x 10-3, well pass the forward error correction (FEC) criterion, were obtained. (C) 2015 Optical Society of America
Going beyond 4 Gbps data rate by employing RGB laser diodes for visible light communication
(2015-07-13)
Janjua, Bilal
;
Oubei, Hassan M.
;
Retamal, Jose R. Duran
;
Ng, Tien Khee
;
Tsai, Cheng-Ting
With increasing interest in visible light communication, the laser diode (LD) provides an attractive alternative, with higher efficiency, shorter linewidth and larger bandwidth for high-speed visible light communication (VLC). Previously, more than 3 Gbps data rate was demonstrated using LED. By using LDs and spectral-efficient orthogonal frequency division multiplexing encoding scheme, significantly higher data rates has been achieved in this work. Using 16-QAM modulation scheme, in conjunction with red, blue and green LDs, data rates of 4.4 Gbps, 4 Gbps and 4 Gbps, with the corresponding BER/SNR/EVM of 3.3 x 10(-3)/15.3/17.9, 1.4 x 10-3/16.3/15.4 and 2.8 x 10(-3)/15.5/16.7 were obtained over transmission distance of similar to 20 cm. We also simultaneously demonstrated white light emission using red, blue and green LDs, after passing through a commercially available diffuser element. Our work highlighted that a tradeoff exists in operating the blue LDs at optimum bias condition while maintaining good color temperature. The best results were obtained when encoding red LDs which gave both the strongest received signal amplitude and white light with CCT value of 5835K. (C) 2015 Optical Society of America

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results