學術出版;;Publications
Permanent URI for this communityhdl:11536/1
收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作,涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.
Browse
23 results
Search Results
Item type:Item, 850/940-nm VCSEL for optical communication and 3D sensing(2018-01-01) ;Cheng, Chih-Hsien ;Shen, Chih-Chiang ;Kao, Hsuan-Yun ;Hsieh, Dan-HuaWang, Huai-YungThis paper is going to review the state-of-the-art of the high-speed 850/940-nm vertical cavity surface emitting laser (VCSEL), discussing the structural design, mode control and the related data transmission performance. InGaAs/AlGaAs multiple quantum well (MQW) was used to increase the differential gain and photon density in VCSEL. The multiple oxide layers and oxide-confined aperture were well designed in VCSEL to decrease the parasitic capacitance and generate single mode (SM) VCSEL. The maximal modulation bandwidth of 30 GHz was achieved with well-designed VCSEL structure. At the end of the paper, other applications of the near-infrared VCSELs are discussed.Item type:Item, Phosphorous Diffuser Diverged Blue Laser Diode for Indoor Lighting and Communication(2015-12-21) ;Chi, Yu-Chieh ;Hsieh, Dan-Hua ;Lin, Chung-Yu ;Chen, Hsiang-YuHuang, Chia-YenAn advanced light-fidelity (Li-Fi) system based on the blue Gallium nitride (GaN) laser diode (LD) with a compact white-light phosphorous diffuser is demonstrated for fusing the indoor whitelighting and visible light communication (VLC). The phosphorous diffuser adhered blue GaN LD broadens luminescent spectrum and diverges beam spot to provide ample functionality including the completeness of Li-Fi feature and the quality of white-lighting. The phosphorous diffuser diverged white-light spot covers a radiant angle up to 120 degrees with CIE coordinates of (0.34, 0.37). On the other hand, the degradation on throughput frequency response of the blue LD is mainly attributed to the selffeedback caused by the reflection from the phosphor-air interface. It represents the current state-ofthe- art performance on carrying 5.2-Gbit/s orthogonal frequency-division multiplexed 16-quadratureamplitude modulation (16-QAM OFDM) data with a bit error rate (BER) of 3.1 x 10(-3) over a 60-cm freespace link. This work aims to explore the plausibility of the phosphorous diffuser diverged blue GaN LD for future hybrid white-lighting and VLC systems.Item type:Item, 4-Gbit/s visible light communication link based on 16-QAM OFDM transmission over remote phosphor-film converted white light by using blue laser diode(2015-12-28) ;Retamal, Jose Ramon Duran ;Oubei, Hassan Makine ;Janjua, Bilal ;Chi, Yu-ChiehWang, Huai-YungVisible Light Communication (VLC) as a new technology for ultrahigh-speed communication is still limited when using slow modulation light-emitting diode (LED). Alternatively, we present a 4-Gbit/s VLC system using coherent blue-laser diode (LD) via 16-quadrature amplitude modulation orthogonal frequency division multiplexing. By changing the composition and the optical-configuration of a remote phosphor-film the generated white light is tuned from cool day to neutral, and the bit error rate is optimized from 1.9 x 10(-2) to 2.8 x 10(-5) in a blue filter-free link due to enhanced blue light transmission in forward direction. Briefly, blue-LD is an alternative to LED for generating white light and boosting the data rate of VLC. (C) 2015 Optical Society of AmericaItem type:Item, Breakthrough to Non-Vacuum Deposition of Single-Crystal, Ultra-Thin, Homogeneous Nanoparticle Layers: A Better Alternative to Chemical Bath Deposition and Atomic Layer Deposition(2017-04-01) ;Liao, Yu-Kuang ;Liu, Yung-Tsung ;Hsieh, Dan-Hua ;Shen, Tien-LinHsieh, Ming-YangMost thin-film techniques require a multiple vacuum process, and cannot produce high-coverage continuous thin filmswith the thickness of a fewnanometers on rough surfaces. We present a new "paradigm shift" non-vacuum process to deposit high-quality, ultra-thin, single-crystal layers of coalesced sulfide nanoparticles (NPs) with controllable thickness down to a few nanometers, based on thermal decomposition. This provides high-coverage, homogeneous thickness, and large-area deposition over a rough surface, with little material loss or liquid chemical waste, and deposition rates of 10 nm/min. This technique can potentially replace conventional thin-film deposition methods, such as atomic layer deposition (ALD) and chemical bath deposition (CBD) as used by the Cu(In, Ga) Se2 (CIGS) thin-film solar cell industry for decades. We demonstrate 32% improvement of CIGS thin-film solar cell efficiency in comparison to reference devices prepared by conventional CBD deposition method by depositing the ZnS NPs buffer layer using the new process. The new ZnS NPs layer allows reduction of an intrinsic ZnO layer, which can lead to severe shunt leakage in case of a CBD buffer layer. This leads to a 65% relative efficiency increase.Item type:Item, An Investigation of Carbon-Doping-Induced Current Collapse in GaN-on-Si High Electron Mobility Transistors(2016-06-01) ;Tzou, An-Jye ;Hsieh, Dan-Hua ;Chen, Szu-Hung ;Liao, Yu-KuangLi, Zhen-YuThis paper reports the successful fabrication of a GaN-on-Si high electron mobility transistor (HEMT) with a 1702 V breakdown voltage (BV) and low current collapse. The strain and threading dislocation density were well-controlled by 100 pairs of AlN/GaN superlattice buffer layers. Relative to the carbon-doped GaN spacer layer, we grew the AlGaN back barrier layer at a high temperature, resulting in a low carbon-doping concentration. The high-bandgap AlGaN provided an effective barrier for blocking leakage from the channel to substrate, leading to a BV comparable to the ordinary carbon-doped GaN HEMTs. In addition, the AlGaN back barrier showed a low dispersion of transiently pulsed I-D under substrate bias, implying that the buffer traps were effectively suppressed. Therefore, we obtained a low-dynamic on-resistance with this AlGaN back barrier. These two approaches of high BV with low current collapse improved the device performance, yielding a device that is reliable in power device applications.Item type:Item, 450-nm GaN laser diode enables high-speed visible light communication with 9-Gbps QAM-OFDM(2015-05-18) ;Chi, Yu-Chieh ;Hsieh, Dan-Hua ;Tsai, Cheng-Ting ;Chen, Hsiang-YuKuo, Hao-ChungA TO-38-can packaged Gallium nitride (GaN) blue laser diode (LD) based free-space visible light communication (VLC) with 64-quadrature amplitude modulation (QAM) and 32-subcarrier orthogonal frequency division multiplexing (OFDM) transmission at 9 Gbps is preliminarily demonstrated over a 5-m free-space link. The 3-dB analog modulation bandwidth of the TO-38-can packaged GaN blue LD biased at 65 mA and controlled at 25 degrees C is only 900 MHz, which can be extended to 1.5 GHz for OFDM encoding after throughput intensity optimization. When delivering the 4-Gbps 16-QAM OFDM data within 1-GHz bandwidth, the error vector magnitude (EVM), signal-to-noise ratio (SNR) and bit-error-rate (BER) of the received data are observed as 8.4%, 22.4 dB and 3.5 x 10(-8), respectively. By increasing the encoded bandwidth to 1.5 GHz, the TO-38-can packaged GaN blue LD enlarges its transmission capacity to 6 Gbps but degrades its transmitted BER to 1.7 x 10(-3). The same transmission capacity of 6 Gbps can also be achieved with a BER of 1 x 10(-6) by encoding 64-QAM OFDM data within 1-GHz bandwidth. Using the 1.5-GHz full bandwidth of the TO-38-can packaged GaN blue LD provides the 64-QAM OFDM transmission up to 9 Gbps, which successfully delivers data with an EVM of 5.1%, an SNR of 22 dB and a BER of 3.6 x 10(-3) passed the forward error correction (FEC) criterion. (C) 2015 Optical Society of AmericaItem type:Item, Observation of unusual optical transitions in thin-film Cu(In,Ga)Se-2 solar cells(2012-11-05) ;Liao, Yu-Kuang ;Kuo, Shou-Yi ;Lin, Woei-Tyng ;Lai, Fang-IHsieh, Dan-HuaIn this paper, we examine photoluminescence spectra of Cu(In,Ga)Se-2 (CIGS) via temperature-dependent and power-dependent photoluminescence (PL). Donor-acceptor pair (DAP) transition, near-bandedge transition were identified by their activation energies. S-shaped displacement of peak position was observed and was attributed to carrier confinement caused by potential fluctuation. This coincides well with the obtained activation energy at low temperature. We also present a model for transition from V-Se to V-In and to V-Cu which illustrates competing mechanisms between DAPs recombinations. (C) 2012 Optical Society of AmericaItem type:Item, Optical cross-talk reduction in a quantum-dot-based full-color micro-light-emitting-diode display by a lithographic-fabricated photoresist mold(2017-10-01) ;Lin, Huang-Yu ;Sher, Chin-Wei ;Hsieh, Dan-Hua ;Chen, Xin-YinChen, Huang-Ming PhilipIn this study, a full-color emission red-green-blue (RGB) quantum-dot (QD)-based micro-light-emitting-diode (micro-LED) array with the reduced optical cross-talk effect by a photoresist mold has been demonstrated. The UV micro-LED array is used as an efficient excitation source for the QDs. The aerosol jet technique provides a narrow linewidth on the micrometer scale for a precise jet of QDs on the micro-LEDs. To reduce the optical cross-talk effect, a simple lithography method and photoresist are used to fabricate the mold, which consists of a window for QD jetting and a blocking wall for cross-talk reduction. The cross-talk effect of the well-confined QDs in the window is confirmed by a fluorescence microscope, which shows clear separation between QD pixels. A distributed Bragg reflector is covered on the micro-LED array and the QDs' jetted mold to further increase the reuse of UV light. The enhanced light emission of the QDs is 5%, 32%, and 23% for blue, green, and red QDs, respectively. (C) 2017 Chinese Laser PressItem type:Item, 850-nm VCSELs With p-Type delta-Doping in the Active Layers for Improved High-Speed and High-Temperature Performance(2016-11) ;Chi, Kai-Lun ;Hsieh, Dan-Hua ;Yen, Jia-Liang ;Chen, Xin-NanChen, Jason (Jyehong)In this paper, we study the influence of p-type modulation doping on the dynamic/static performance of highspeed 850-nm VCSELs with highly strained multiple quantum wells. The studied device structure has a 3/2 lambda asymmetric cavity design, which can let the internal transit time of injected carriers be as short as that of 1/2 lambda cavity design and further improve its performance in terms of speed and output power for high single-mode operation. Our proposed VCSEL structure with p-type doping shows superior modulation speed with an output power comparable with that of the un-doped reference device under room temperature operation. Furthermore, when the operating temperature reaches 85 degrees C, there is a significant improvement in both the modulation speed and maximum power of the p-doped structures. According to our simulation, this can be attributed to the change in the quasi-Fermi levels of the injected carriers after the addition of p-doping in the active layers, which minimizes the electron leakage under high-temperature operation.Item type:Item, High-Efficiency InGaN/GaN Core-Shell Nanorod Light-Emitting Diodes With Low-Peak Blueshift and Efficiency Droop(2017-03) ;Tzou, An-Jye ;Hsieh, Dan-Hua ;Hong, Kuo-Bin ;Lin, Da-WeiHuang, Jhih-KaiIn this study, novel three-dimensional (3-D) nanoscale structures and methodology are demonstrated for application in high-efficiency core-shell nanorod (NR) light-emitting diodes (LEDs). The key to our successful growth of the structures is the introduction of passivation, which can be used to selectively grow active layers in desired structures. Through the fabrication methodology, core-shell NR green LEDs exhibiting large nonpolar active region and homogeneous indium distributions without a point tip shape were achieved. Stable light emission at a central wavelength of 518 nm was achieved as the injected current increased to more than 40 mA. The improved NR LEDs exhibited a stable luminescence emission wavelength (blueshift of 62 nm) and low-efficiency droop (18.1%) at 200 mA. Our scheme is scalable and compatible with current technologies, which provides a new perspective for developing high-performance, 3-D nanoscale optoelectronic devices.