學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 17

Channel estimation for OFDM systems based on comb-type pilot arrangement in frequency selective fading channels
(1998-02-01)
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
In this paper, the channel estimation methods for OFDM systems based on comb-type pilot sub-carrier arrangement are in vestigated. The channel estimation algorithm based on comb-type pilots is divided into pilot signal estimation and channel interpolation. The pilot signal estimation based on LS or MMSE criteria, together with channel interpolation based on piecewise-linear interpolation or piecewise second-order polynomial interpolation is studied. Owing to the MMSE estimate of pilot signals, the inter-carrier interference and additive white Gaussian noise are reduced considerably. The computational complexity of pilot signal estimation based on MMSE criterion can be reduced by using a simplified LMMSE estimator with low-rank approximation using singular value decomposition. Phase compensators before and after interpolation are also presented to combat the phase changes of subchannel symbols arising from the frame synchronization errors. Comparing to the transform-domain processing based channel estimation algorithm, the MMSE estimate of pilot signals together with phase compensated linear interpolation algorithm provides better performance and requires less computations.
Channel estimation for OFDM systems based on comb-type pilot arrangement in frequency selective fading channels
(1998-02-01)
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
In this paper, the channel estimation methods for OFDM systems based on comb-type pilot sub-carrier arrangement are in vestigated. The channel estimation algorithm based on comb-type pilots is divided into pilot signal estimation and channel interpolation. The pilot signal estimation based on LS or MMSE criteria, together with channel interpolation based on piecewise-linear interpolation or piecewise second-order polynomial interpolation is studied. Owing to the MMSE estimate of pilot signals, the inter-carrier interference and additive white Gaussian noise are reduced considerably. The computational complexity of pilot signal estimation based on MMSE criterion can be reduced by using a simplified LMMSE estimator with low-rank approximation using singular value decomposition. Phase compensators before and after interpolation are also presented to combat the phase changes of subchannel symbols arising from the frame synchronization errors. Comparing to the transform-domain processing based channel estimation algorithm, the MMSE estimate of pilot signals together with phase compensated linear interpolation algorithm provides better performance and requires less computations.
An adaptive multialphabet arithmetic coding for video compression
(1998-04-01)
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
In this paper, the hardware implementation issues far an adaptive multialphabet arithmetic coder are discussed. A simple weighted history model is proposed to encode the video dare, This model uses a weighted finite buffer to model the cumulative density function of the arithmetic coder. The performance of the weighted history model is evaluated together with several other well-known models. To access, search, and update the cumulative frequencies corresponding to model symbols in real rime, we present a low complexity multibase cumulative occurrence array structure that can offer the probability information Tor high-speed encoding and decoding, for the application in video compression, the multialphabet arithmetic coding with weighted history model can be a good choice as the variable length coding of the video symbols.
A low-complexity frame synchronization and frequency offset compensation scheme for OFDM systems over fading channels
(1999-09-01)
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
dThis paper presents a fast low-complexity synchronization scheme for orthogonal frequency division multiplexing (OFDM) systems over fading channels. By utilizing the guard interval in OFDM signals, the Frame synchronization and the frequency offset estimation are considered simultaneously. The Implementation can be simplified by only using the sign bits of the in-phase and the quadrature components of the received OFDM signal for frame synchronization and frequency offset compensation. A frequency-offset independent frame synchronization algorithm is derived, and a low-complexity frequency offset estimator based on the synchronized correlator output is presented in this paper. Due to the subcarrier ambiguity in the guard-interval-based (GIB) frequency detector, the maximum correctable frequency range is limited to +/- 1/2 of the subcarrier spacing. In this paper, we also present a new frequency acquisition scheme that can solve the subcarrier ambiguity problem and extend the frequency acquisition range to nearly a half of the useful OFDM signal bandwidth.
Using knowledge-based systems for research on parallelizing compilers
(2001-03-01)
Yang, CT
;
Tseng, SS
;
Fann, YW
;
Tsai, TK
;
Hsieh, MH
The main function of parallelizing compilers is to analyze sequential programs, in particular the loop structure, to detect hidden parallelism and automatically restructure sequential programs into parallel subtasks that are executed on a multiprocessor. This article describes the design and implementation of an efficient parallelizing compiler to parallelize loops and achieve high speedup rates on multiprocessor systems. It is well known that the execution efficiency of a loop can be enhanced if the loop is executed in parallel or partially parallel, such as in a DOALL or DOACROSS loop. This article also reviews a practical parallel loop detector (PPD) that is implemented in our PFPC on finding the parallelism in loops. The PPD can extract the potential DOALL and DOACROSS loops in a program by verifying array subscripts. In addition, a new model by using knowledge-based approach is proposed to exploit more loop parallelisms in this paper. The knowledge-based approach integrates existing loop transformations and loop scheduling algorithms to make good use of their ability to extract loop parallelisms. Two rule-based systems, called the KPLT and IPLS, are then developed using repertory grid analysis and attribute-ordering tables respectively, to construct the knowledge bases. These systems can choose an appropriate transform and loop schedule, and then apply the resulting methods to perform loop parallelization and obtain a high speedup rate. For example, the IPLS system can choose an appropriate loop schedule for running on multiprocessor systems. Finally, a runtime technique based on the inspector/executor scheme is proposed in this article for finding available parallelism on loops. Our inspector can determine the wavefronts of a loop with any complex indirected array-indexing pattern by building a DEF-USE table. The inspector is fully parallel without any synchronization. Experimental results show that the new method can resolve any complex data dependence patterns where no previous research can. One of the ultimate goals is to construct a high-performance and portable FORTRAN parallelizing compiler on shared-memory multiprocessors. We believe that our research may provide more insight into the development of a highperformance parallelizing compiler Copyright (C) 2001 John Wiley & Sons, Ltd.
A multialphabet arithmetic coding with weighted history model
(1995)
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
A frequency acquisition scheme for OFDM systems
(1996)
Hsieh, MH
;
Wei, CH
;
交大名義發表
;
電子工程學系及電子研究所
;
National Chiao Tung University
This paper derives a frequency acquisition algorithm for orthogonal frequency division multiplexing (OFDM) systems. This frequency acquisition algorithm is a modification of the frequency tracking algorithm introduced in [1], which uses a repeated data symbol and a maximum likelihood estimation (MLE) algorithm to estimate the frequency offset. The estimate is extremely accurate but the acquisition range is limited to +/-1/2 of the intercarrier spacing. With some modifications of the frequency tracking scheme and an assumption of the multipath channel introduced in this paper, the frequency acquisition can be converted to an analogous PN sequence acquisition problem. Therefore, a partial-sum correlator with an appropriate threshold can be used to acquire the frequency offset.
Narrow-band interference rejection in OFDM-CDMA transmission system
(1998)
Hsiao, HF
;
Hsieh, MH
;
Wei, CH
;
電子工程學系及電子研究所
;
Department of Electronics Engineering and Institute of Electronics
In this paper, we present a new method called "differential threshold exciser (DTE)" to suppress narrow-band interference in OFDM-CDMA transmission system. Also, another threshold exciser, "over-through threshold exciser (OTTE)", is discussed. The two methods use different transform characteristics of the interference and information signal to suppress the narrow-band interference no matter the interference is stationary or nonstationary. The DTE algorithm has nearly the same performance as the OTTE algorithm with less computation complexity.
A tool portfolio elimination mechanism (TPEM) for a wafer fab
(2004)
Chung, SH
;
Hsieh, MH
;
Liu, JC
;
工業工程與管理學系
;
Department of Industrial Engineering and Management
Wafer manufacturers usually face critical problems when making decisions regarding to the tool portfolio elimination, mainly due to the dramatic and frequent influences from their internal and external environments. This paper is aimed to develop a mechanism, named Tool Portfolio Elimination Mechanism (TPEM), to evaluate the impacts on production performance and capital expenditure, and to determine which equipment is suitable for pruning. In TPEM, there are four stages to decide tool portfolio elimination according to the PDCA cycle. Meanwhile, the simulation results show; that the fab production performance and cost are much improved by the TPEM algorithm. Especially, it can be applied and implemented to industry very quickly and easily.
Improvement in light-output efficiency of near-ultraviolet InGaN-GaN LEDs fabricated on stripe patterned sapphire substrate
(2005)
Lee, YJ
;
Hsu, TC
;
Kuo, HC
;
Wang, SC
;
Yang, YL
The output power of GaN-based near ultraviolet stripe patterned sapphire substrate (PSS) LEDs was 20% higher than that of the conventional LEDs. The possible mechanism of this enhancement will be discussed in this report.

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results