學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 17

Self-assembly of hierarchical MoSx/CNT nanocomposites (2 < x < 3): towards high performance anode materials for lithium ion batteries
(2013-07-09)
Shi, Yumeng
;
Wang, Ye
;
Wong, Jen It
;
Tan, Alex Yuan Sheng
;
Hsu, Chang-Lung
Two dimension (2D) layered molybdenum disulfide (MoS2) has emerged as a promising candidate for the anode material in lithium ion batteries (LIBs). Herein, 2D MoSx (2 <= x <= 3) nanosheet-coated 1D multiwall carbon nanotubes (MWNTs) nanocomposites with hierarchical architecture were synthesized via a high-throughput solvent thermal method under low temperature at 2006 degrees C. The unique hierarchical nanostructures with MWNTs backbone and nanosheets of MoSx have significantly promoted the electrode performance in LIBs. Every single MoSx nanosheet interconnect to MWNTs centers with maximized exposed electrochemical active sites, which significantly enhance ion diffusion efficiency and accommodate volume expansion during the electrochemical reaction. A remarkably high specific capacity (i.e., >1000 mAh/g) was achieved at the current density of 50 mA g(-1), which is much higher than theoretical numbers for either MWNTs or MoS2 along (similar to 372 and similar to 670 mAh/g, respectively). We anticipate 2D nanosheets/1D MWNTs nanocomposites will be promising materials in new generation practical LIBs.
Monolayer MoSe2 Grown by Chemical Vapor Deposition for Fast Photodetection
(2014-08-01)
Chang, Yung-Huang
;
Zhang, Wenjing
;
Zhu, Yihan
;
Han, Yu
;
Pu, Jiang
Monolayer molybdenum disulfide (MoS2) has become a promising building block in optoelectronics for its high photosensitivity. However, sulfur vacancies and other defects significantly affect the electrical and optoelectronic properties of monolayer MoS2 devices. Here, highly crystalline molybdenum diselenide (MoSe2) monolayers have been successfully synthesized by the chemical vapor deposition (CVD) method. Low-temperature photoluminescence comparison for MoS2 and MoSe2 monolayers reveals that the MoSe2 monolayer shows a much weaker bound exciton peak; hence, the phototransistor based on MoSe2 presents a much faster response time (<25 ms) than the corresponding 30 s for the CVD MoS2 monolayer at room temperature in ambient conditions. The images obtained from transmission electron microscopy indicate that the MoSe exhibits fewer defects than MoS2. This work provides the fundamental understanding for the differences in optoelectronic behaviors between MoSe2 and MoS2 and is useful for guiding future designs in 2D material-based optoelectronic devices.
Photoluminescence Enhancement and Structure Repairing of Monolayer MoSe2 by Hydrohalic Acid Treatment
(2016-01)
Han, Hau-Vei
;
Lu, Ang-Yu
;
Lu, Li-Syuan
;
Huang, Jing-Kai
;
Li, Henan
Atomically thin two-dimensional transition metal dichalcogenides (TMDCs) have attracted much attention recently due to their unique electronic and optical properties for future optoelectronic devices. The chemical vapor deposition (CVD) method is able to generate TMDCs layers with a scalable size and a controllable thickness. However, the TMDC monolayers grown by CVD may incorporate structural defects, and it is fundamentally important to understand the relation between photoluminescence and structural defects. In this report, point defects (Se vacancies) and oxidized Se defects in CVD-grown MoSe2 monolayers are identified by transmission electron microscopy and X-ray photoelectron spectroscopy. These defects can significantly trap free charge carriers and localize excitons, leading to the smearing of free band-to-band exciton emission. Here, we report that the simple hydrohalic acid treatment (such as HBr) is able to efficiently suppress the trap state emission and promote the neutral exciton and trion emission in defective MoSe2 monolayers through the p-doping process, where the overall photoluminescence intensity at room temperature can be enhanced by a factor of 30. We show that HBr treatment is able to activate distinctive trion and free exciton emissions even from highly defective MoSe2 layers. Our results suggest that the HBr treatment not only reduces the n-doping in MoSe2 but also reduces the structural defects. The results provide further insights of the control and tailoring the exciton emission from CVD-grown monolayer TMDCs.
Photoluminescence Enhancement and Structure Repairing of Monolayer MoSe2 by Hydrohalic Acid Treatment
(2016-01-01)
Han, Hau-Vei
;
Lu, Ang-Yu
;
Lu, Li-Syuan
;
Huang, Jing-Kai
;
Li, Henan
Atomically thin two-dimensional transition metal dichalcogenides (TMDCs) have attracted much attention recently due to their unique electronic and optical properties for future optoelectronic devices. The chemical vapor deposition (CVD) method is able to generate TMDCs layers with a scalable size and a controllable thickness. However, the TMDC monolayers grown by CVD may incorporate structural defects, and it is fundamentally important to understand the relation between photoluminescence and structural defects. In this report, point defects (Se vacancies) and oxidized Se defects in CVD-grown MoSe2 monolayers are identified by transmission electron microscopy and X-ray photoelectron spectroscopy. These defects can significantly trap free charge carriers and localize excitons, leading to the smearing of free band-to-band exciton emission. Here, we report that the simple hydrohalic acid treatment (such as HBr) is able to efficiently suppress the trap state emission and promote the neutral exciton and trion emission in defective MoSe2 monolayers through the p-doping process, where the overall photoluminescence intensity at room temperature can be enhanced by a factor of 30. We show that HBr treatment is able to activate distinctive trion and free exciton emissions even from highly defective MoSe2 layers. Our results suggest that the HBr treatment not only reduces the n-doping in MoSe2 but also reduces the structural defects. The results provide further insights of the control and tailoring the exciton emission from CVD-grown monolayer TMDCs.
Enhanced Electrocatalytic Activity of MoSx on TCNQ-Treated Electrode for Hydrogen Evolution Reaction
(2014-10-22)
Chang, Yung-Huang
;
Nikam, Revannath D.
;
Lin, Cheng-Te
;
Huang, Jing-Kai
;
Tseng, Chien-Chih
Molybdenum sulfide has recently attracted much attention because of its low cost and excellent catalytical effects in the application of hydrogen evolution reaction (HER). To improve the HER efficiency, many researchers have extensively explored various avenues such as material modification, forming hybrid structures or modifying geometric morphology. In this work, we reported a significant enhancement in the electrocatalytic activity of the MoSx via growing on Tetracyanoquinodimethane (TCNQ) treated carbon cloth, where the MoSx was synthesized by thermolysis from the ammonium tetrathiomolybdate ((NH4)(2)MoS4) precursor at 170 degrees C. The pyridinic N- and graphitic N-like species on the surface of carbon cloth arising from the TCNQ treatment facilitate the formation of Mo5+ and S-2(2-) species in the MoSx, especially with S-2(2-) serving as an active site for HER. In addition, the smaller particle size of the MoSx grown on TCNQ-treated carbon cloth reveals a high ratio of edge sites relative to basal plane sites, indicating the richer effective reaction sites and superior electrocatalytic characteristics. Hence, we reported a high hydrogen evolution rate for MoSx on TCNQ-treated carbon cloth of 6408 mL g(-1) cm(-2) h(-1) (286 mmol g(-1) cm(-2) h(-1)) at an overpotential of V = 0.2 V. This study provides the fundamental concepts useful in the design and preparation of transition metal dichalcogenide catalysts, beneficial in the development in clean energy
Monolayer MoSe2 Grown by Chemical Vapor Deposition for Fast Photodetection
(2014-08-01)
Chang, Yung-Huang
;
Zhang, Wenjing
;
Zhu, Yihan
;
Han, Yu
;
Pu, Jiang
Monolayer molybdenum disulfide (MoS2) has become a promising building block in optoelectronics for its high photosensitivity. However, sulfur vacancies and other defects significantly affect the electrical and optoelectronic properties of monolayer MoS2 devices. Here, highly crystalline molybdenum diselenide (MoSe2) monolayers have been successfully synthesized by the chemical vapor deposition (CVD) method. Low-temperature photoluminescence comparison for MoS2 and MoSe2 monolayers reveals that the MoSe2 monolayer shows a much weaker bound exciton peak; hence, the phototransistor based on MoSe2 presents a much faster response time (<25 ms) than the corresponding 30 s for the CVD MoS2 monolayer at room temperature in ambient conditions. The images obtained from transmission electron microscopy indicate that the MoSe exhibits fewer defects than MoS2. This work provides the fundamental understanding for the differences in optoelectronic behaviors between MoSe2 and MoS2 and is useful for guiding future designs in 2D material-based optoelectronic devices.
Band Gap-Tunable Molybdenum Sulfide Selenide Monolayer Alloy
(2014-07-09)
Su, Sheng-Han
;
Hsu, Yu-Te
;
Chang, Yung-Huang
;
Chiu, Ming-Hui
;
Hsu, Chang-Lung
Enhancing the electrocatalytic water splitting efficiency for amorphous MoSx
(2014-03-26)
Hsu, Chang-Lung
;
Chang, Yung-Huang
;
Chen, Tzu-Yin
;
Tseng, Chien-Chih
;
Wei, Kung-Hwa
Amorphous molybdenum sulfide (MoSx) materials have been considered as cheap and promising catalysts for hydrogen evolution reaction (HER). In this contribution, we report that the amorphous MoSx catalysts prepared by the low temperature thermolysis of the (NH4)(2)MoS4 precursors on carbon clothes (catalyst loading: 3.2 mg/cm(2)) exhibit a Tefal slope of 50.5 mV/dec and a high exchange current density of 1.5 x 10(-3) mA/cm(2) in 0.5 M H2SO4 solutions. Spectroscopic studies of the amorphous MoSx catalysts show that the increase of HER efficiency is positively correlated to the concentration of S-2(2-) species, providing strong evidence to support the argument that S-2(2-) is an active species for electrocatalytic HER. Additionally, the method for preparing catalysts is simple, scalable and applicable for large-scale production. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
Three- Dimensional Molybdenum Sulfi de Sponges for Electrocatalytic Water Splitting
(2014-03-01)
Chang, Yung-Huang
;
Wu, Feng-Yu
;
Chen, Tzu-Yin
;
Hsu, Chang-Lung
;
Chen, Chang-Hsiao
Large-Area Synthesis of Highly Crystalline WSe2 Mono layers and Device Applications
(2014-01-01)
Huang, Jing-Kai
;
Pu, Jiang
;
Hsu, Chang-Lung
;
Chiu, Ming-Hui
;
Juang, Zhen-Yu
The monolayer transition metal dichalcogenides have recently attracted much attention owing to their potential in valleytronics, flexible and low-power electronics, and optoelectronic devices. Recent reports have demonstrated the growth of large-size two-dimensional MoS2 layers by the sulfurization of molybdenum oxides. However, the growth of a transition metal selenide monolayer has still been a challenge. Here we report that the introduction of hydrogen in the reaction chamber helps to activate the selenization of WO3, where large size WSe2 monolayer flakes or thin films can be successfully grown. The top-gated field-effect transistors based on WSe2 monolayers using ionic gels as the dielectrics exhibit ambipolar characteristics, where the hole and electron mobility values are up to 90 and 7 cm(2)/Vs, respectively. These films can be transferred onto arbitrary substrates, which may inspire research efforts to explore their properties and applications. The resistor-loaded inverter based on a WSe2 film, with a gain of similar to 13, further demonstrates its applicability for logic-circuit integrations.

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results