學術出版;;Publications
Permanent URI for this communityhdl:11536/1
收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作,涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.
Browse
3 results
Search Results
Item type:Item, RF noise in 0.18-mu m and 0.13-mu m MOSFETs(2002-12-01) ;Huang, CH ;Lai, CH ;Hsieh, JC ;Liu, JChin, AWe have studied the gate finger number and gate ength dependence on minimum noise figure (NFmin) in deep submicrometer MOSFETs. A lowest NFmin. of 0.93 dB is measured in 0.18-mum MOSFET at 5.8 GHz as increasing finger number to 50 fingers, but increases abnormally when above 50. The scaling gate length to 0.13 mum shows larger NFmin than the 0.18-mum case at the same finger number. From the analysis of a well-calibrated device model, the abnormal finger number dependence is due to the combined effect of reducing gate resistance and increasing substrate loss as increasing finger number. The scaling to 0.13-mum MOSFET gives higher NFmin due to the higher gate resistance and a modified T-gate structure proposed to optimize the NFmin for further scaling down of the MOSFET.Item type:Item, High-density MIM canpacitors using AlTaOx dielectrics(2003-05-01) ;Yang, MY ;Huang, CH ;Chin, A ;Zhu, CXLi, MFThe authors have obtained good MIM capacitor integrity of high-capacitance density of 10 fF/mum(2) using high-k AlTaOx fabricated at 400degreesC. In addition, small voltage dependence of capacitance of < 600, ppm (quadratic voltage coefficient of only 130 ppm/V-2). is obtained at 1 GHz using their mathematical derivation from measured high-frequency S parameters. These good results ensure the high-k AlTaOx. MIM capacitor technology is useful for high-precision circuits operated at the RF frequency regime.Item type:Item, Very high density RF MIM capacitors (17 fF/mu m(2) using high-kappa Al2O3 doped Ta2O5 dielectrics(2003-10-01) ;Yang, MY ;Huang, CH ;Chin, A ;Zhu, CXCho, BJUsing high-kappa, Al2O3 doped Ta2O5 dielectric, we have obtained record high MINI capacitance density of 17 fF/mum(2) at 100 KHz, small 5% capacitance reduction to RF frequency range, and low leakage current density of 8.9 x 10(-7) A/cm(2). In combination of both high capacitor density and low leakage current density, a very low leakage current of 5.2 x 10(-12) A is calculated for a typical large 10 pF capacitor used in RF IC that is even smaller than that of a deep sub-mum MOSFET. This very high capacitance density with good MINI capacitor characteristics can significantly reduce the chip size of RF ICs.