<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Huang, Che-ChengHas files: No

Search Results

Now showing 1 - 10 of 13
  • Thumbnail Image
    Item type:Item,
    CMOS low-noise amplifier for mode-C & mode-D MB-OFDM UWB wireless receiver
    (2007-01-01)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chih
    ;
    電信工程研究所
    This paper presents a low-power low-noise amplifier (LNA) with switching bands for MB-OFDM Group-C and Group-D ultra-wideband wireless radio system. The LNA is designed and implemented in TSMC 0.18um RF CMOS process. Simulation results show that power gain of 12.4dB, input and output matching lower then -8.5dB and -14.5dB, and a minimum NF of 4.0dB can be achieved, while the power consumption is 11.2 mW through 1.8V power supply.
  • Thumbnail Image
    Item type:Item,
    0.18um CMOS Low-Noise Amplifier with two 2(nd)-order notch filters for Ultra-Wideband Wireless Receiver
    (2007)
    Huang, Che-Cheng
    ;
    Huang, Zhe-Yang
    ;
    Wang, Yen-Chun
    ;
    Hung, Yeh-Tai
    ;
    Chen, Meng-Ping
    In this paper a CMOS dual-wideband low-noise amplifier (LNA) is designed for ultra-wideband (UWB) wireless receiver radio system. The design consists of a wideband input impedance matching network, two stage cascode amplifiers with shunt-peaked load, two 2(nd)-order notch fitters and an output buffer for measurement purpose. It is simulated in TSMC 0.18um standard CMOS process. The LNA gives 13.1dB maximum power gain between 3.0GHz-4.9GHz and 15.5dB maximum power gain between 6.2GHz-10.2GHz while consuming 21.9mW through a 1.8V supply. Over the 3.1GHz-4.9GHz frequency band and the 6.2GHz-10.2GHz,a minimum noise figure is 2.5dB and 2.8dB. Input return loss lower than 6.4dB in all bandwidth have been achieved.
  • Thumbnail Image
    Item type:Item,
    Multi-stage low-noise amplifier with LC-tank load for ultra-wideband wireless receiver
    (2007)
    Chen, Chun-Chieh
    ;
    Huang, Zhe-Yang
    ;
    Wang, Yen-Chun
    ;
    Chiang, Pei-Yuan
    ;
    Huang, Che-Cheng
    A multi-stage low-noise amplifier (LNA) with LC-tank load to extend the bandwidth is designed for ultra-wideband (UWB) wireless receiver. The design consists of three LC-tank cascode amplifier and one output buffer and is implemented in 0.18um RF CMOS process. The LNA gives 14.5dB gain and 7.2GHz 3dB bandwidth (3.1 - 10.3GHz) while consuming 22.8mW through a 1.5V supply. Over the 3.1GHz - 10.3GHz frequency band, a minimum noise figure of 2.6dB and input return loss lower than -8.8dB have been achieved.
  • Thumbnail Image
    Item type:Item,
    An Inductor-Coupling Resonated CMOS Low Noise Amplifier for 3.1-10.6GHz Ultra-Wideband System
    (2009)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chill
    ;
    Chen, Chia-Min
    In this paper, a low power low-noise amplifier (LNA) using inductor-coupling resonated technique is designed for ultra-wideband (UWB) wireless system. The design consists of a wideband input impedance matching network, one stage cascode amplifier with inductor-coupling resonated load, and an output buffer; it was fabricated in TSMC 0.18um standard RF CMOS process. The UWB LNA gives 10.8dB power gain and 9.4GHz 3dB bandwidth (1.2GHz - 10.6GHz) while consuming only 6.2mW through a 1.2V supply, including output buffer. Over the 3.1GHz - 10.6GHz frequency band, a minimum noise figure of 3.9dB and input return loss lower than -5.7dB have been achieved.
  • Thumbnail Image
    Item type:Item,
    A switching-band CMOS low-noise amplifier for 6-11GHz MB-OFDM UWB wireless radio system
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    電信工程研究所
    ;
    Institute of Communications Engineering
    This paper presents a low-power low-noise amplifier (LNA) with switching bands for MB-OFDM Group-C and Group-D ultra-wideband wireless radio system. The LNA is designed and implemented in TSMC 0.18um RF CMOS process. Simulation results show that power gain of 12.4dB, input and output matching lower then -8.5dB and -14.5dB, and a minimum NF of 4.0dB can be achieved., while the power consumption is 11.2 mW through 1.8V power supply.
  • Thumbnail Image
    Item type:Item,
    CMOS dual-wideband low-noise amplifier with notch filter for 3.1GHz-10.6GHz ultra-wideband wireless receiver
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    電信工程研究所
    ;
    Institute of Communications Engineering
    In this paper a CMOS dual-wideband low-noise amplifier (LNA) is designed for ultra-wideband (UWB) wireless receiver radio system..The design consists of a wideband input impedance matching network, two stage cascode amplifiers with shunt-peaked load, a notch filter and an output buffer for measurement purpose. It is simulated in TSMC 0.18um standard RF CMOS process. The LNA gives 13.66dB maximum power gain between 3.0GHz-4.9GHz and 10.34dB maximum power gain between 6.0GHz-10.3GHz while consuming 24.07mW through a 1.8V supply. Over the 3.1GHz-4.9GHz frequency band and the 6.0GHz-10.3GHz, a minimum noise figure is 2.6dB and 3.8dB. Input return loss lower than -8.31dB in all bandwidth have been achieved.
  • Thumbnail Image
    Item type:Item,
    A 1v CMOS low-noise amplifier with inductive resonated for 3.1-10.6GHz UWB wireless receiver
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chih
    ;
    電信工程研究所
    In this paper a low power and low-noise amplifier (LNA) is designed for ultra-wideband (UWB) system. The design consists of a wideband input impedance matching network, two stages common-source amplifier with inductive resonated load and an output buffer measurement purpose; it is fabricated in TSMC 0.18um standard RF CMOS process. The measured UWB LNA gives 12.0dB gain and 8.0GHz 3dB bandwidth (3.0-11.0GHz) while consuming only 7.3mW through a 1.0V supply including the buffer. Over the 3.1-10.6 GHz frequency band, a minimum noise figure of 4.2dB and input return loss lower than -8.7dB have been achieved.
  • Thumbnail Image
    Item type:Item,
    A 1V-2.39MW capacitor-coupling resonated low noise amplifier for 3-5GHz ultra-wideband system
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chih
    ;
    電信工程研究所
    In this paper a high gain, low power, low-noise amplifier (LNA) is designed for ultra-wideband (UWB) system. The design consists of a wideband input impedance matching network, one stage cascodc amplifier with capacitor-coupling resonated load and it is fabricated in UMC 0.18um standard RF CMOS process. The LNA gives 10.3dB gain and 1.8GHz 3dB bandwidth (3.1 - 4.9GHz) while consuming only 2.39mW through a 1.0V supply. Over the 3.1 - 4.9GHz frequency band, a minimum noise figure of 4.5dB and input return loss lower than -5.7dB have been achieved.
  • Thumbnail Image
    Item type:Item,
    CMOS low-noise amplifier for mode-C & mode-D MB-OFDM UWB wireless receiver
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chih
    ;
    電信工程研究所
    This paper presents a low-power low-noise amplifier (LNA) with switching bands for MB-OFDM Group-C and Group-D ultra-wideband wireless radio system. The LNA is designed and implemented in TSMC 0.18um RF CMOS process. Simulation results show that power gain of 12.4dB, input and output matching lower then -8.5dB and -14.5dB, and a minimum NF of 4.0dB can be achieved, while the power consumption is 11.2 mW through 1.8V power supply.
  • Thumbnail Image
    Item type:Item,
    CMOS low-noise amplifier for mode-C & mode-D MB-OFDM UWB wireless receiver
    (2007)
    Huang, Zhe-Yang
    ;
    Huang, Che-Cheng
    ;
    Chen, Chun-Chieh
    ;
    Hung, Chung-Chih
    ;
    電信工程研究所
    This paper presents a low-power low-noise amplifier (LNA) with switching bands for MB-OFDM Group-C and Group-D ultra-wideband wireless radio system. The LNA is designed and implemented in TSMC 0.18um RF CMOS process. Simulation results show that power gain of 12.4dB, input and output matching lower then -8.5dB and -14.5dB, and a minimum NF of 4.0dB can be achieved, while the power consumption is 11.2 mW through 1.8V power supply.