<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Lai, YLSubject: search.filters.subject.T-shaped gate

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item type:Item,
    Novel I-line phase shift mask technique for submicron T-shaped gate formation
    (2002-07-01)
    Chen, SH
    ;
    Chang, HC
    ;
    Fu, DK
    ;
    Chang, EY
    ;
    Lai, YL
    A novel submicron (<0.2 mum) T-shaped gate technology using a phase shift mask (PSM) technique is developed. The 8% half-tone PSM was selected for the definition of the isolated narrow space. Before lithography, a 2000 Angstrom SiN film was deposited on the wafer. After i-line PSM exposure and reactive ion etching (RIE) of the silicon nitride film, openings less than 0.2 mum wide were formed on the SiN film. To further reduce the dimensions of the openings, an additional 566 Angstrom nitride was then deposited on the wafer and etched back using RIE without any mask. An opening of 0.167 mum was formed on the wafer after the dry etching process. The wafer was then coated with another layer of photoresist to form a lift-off structure. The T-shaped gate with a length of 0.167 mum was obtained using this technique. The novel T-shaped gate technology is a high-throughput process for both silicon and compound semiconductor devices.
  • Thumbnail Image
    Item type:Item,
    A simple fabrication process of T-shaped gates using a deep-UV/electron-beam/deep-UV tri-layer resist system and electron-beam lithography
    (1996-12-01)
    Lai, YL
    ;
    Chang, EY
    ;
    Chang, CY
    ;
    Yang, HPD
    ;
    Nakamura, K
    A new fabrication process of T-shaped gates has been developed using a deep-UV/electron-beam/deep-UV (DUV/EB/DUV) tri-layer resist system and electron-beam lithography for the first time. The simple process accomplished a submicron T-shaped gate by a single exposure and a single development step. The narrow/wide/narrow opening of the DUV/EB/DUV resist structure can be accurately controlled by the e-beam dosage and the development conditions. Differences in the sensitivities of the DUV resist and the EB resist were investigated. Due to the lower sensitivity of the adopted DUV resist to the electron beam, the smaller opening of the DUV resist layer was obtained. The higher sensitivity of the EB resist resulted in a wider opening in the middle resist layer. A 0.15-mu m-gate-length T-shaped gate can be easily formed by the short-process-time and low-production-cost hybrid DUV/EB/DUV resist approach.