<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Lee, Hsin-YiSubject: search.filters.subject.Flow-rate interruption

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item type:Item,
    Fabrication of epitaxial ZnO films by atomic-layer deposition with interrupted flow
    (2009-12-31)
    Ku, Ching-Shun
    ;
    Huang, Jheng-Ming
    ;
    Lin, Chih-Ming
    ;
    Lee, Hsin-Yi
    ;
    材料科學與工程學系
    We formed epitaxial ZnO thin films on a (0001) c-plane sapphire substrate through deposition of atomic layers (ALD) at 25-160 degrees C using diethylzinc (DEZn) and deionized water as precursors in combination with interrupted flow. High-resolution X-ray diffraction measurements were employed to characterize the microstructure of these films. With interrupted flow, we obtained ZnO thin films with an optimal growth window in a range of 40-160 degrees C, effectively decreasing the growth temperature by about 120 degrees C relative to a conventional method involving continuous flow. X-ray reflectivity measurements showed that the rate of growth increased also between 20 degrees C and 120 degrees C. The XRD results indicate that the stock time might extend the reaction of DEZn and water through an increased duration. All results show that a low temperature for growth improves the crystalline quality and is consistent with thermodynamically blocked self-compensation. (C) 2009 Elsevier B.V. All rights reserved.
  • Thumbnail Image
    Item type:Item,
    Growth of high-quality epitaxial ZnO films on (10-10) sapphire by atomic layer deposition with flow-rate interruption method
    (2013-09-01)
    Huang, Jheng-Ming
    ;
    Ku, Ching-Shun
    ;
    Lee, Hsin-Yi
    ;
    Lin, Chih-Ming
    ;
    Chen, San-Yuan
    A novel process in an atomic layer deposition system with "flow-rate interruption" (FRI) was developed to obtain epitaxial ZnO films of high quality. The m-plane ZnO thin films were grown on m-plane sapphire substrates by atomic layer deposition with FRI or a conventional continuous-flow method at the temperature in the range of 25-260 degrees C; 200 degrees C appeared optimal. Measurements of X-ray reflectivity indicated that the thickness of ZnO films with FRI is almost twice than that grown with the continuous-flow method. The structural, optical and electrical properties were investigated with X-ray diffraction (XRD), photoluminescence and Hall measurements. The diffraction results indicated that the interrupted flow might extend the reaction of diethylzinc and water through an increased duration to improve the crystallographic quality of the films. According to the results from XRD at high resolution, to substantiate the epitaxial relation between the thin film and the substrate, an off-normal azimuthal scan along ZnO (201) demonstrated two-fold symmetry that indicated the ZnO films to be in epitaxial growth on sapphire. The photoluminescence results showed a strongly enhanced near-band-edge emission of an FRI sample, and the donor-bond exciton appearing in films also indicated superior crystalline qualities. The Hall mobility of the FRI method was up to 64.7 cm(2) V-1 s(-1). The FRI method evidently improved the structural, optical and electrical properties of the ZnO films with small consumption of precursors. (C) 2012 Elsevier B.V. All rights reserved.
  • Thumbnail Image
    Item type:Item,
    Epitaxial growth of ZnO films at extremely low temperature by atomic layer deposition with interrupted flow
    (2010-04-15)
    Ku, Ching-Shun
    ;
    Lee, Hsin-Yi
    ;
    Huang, Jheng-Ming
    ;
    Lin, Chih-Ming
    ;
    材料科學與工程學系
    Thin crystalline films of zinc oxide (ZnO) of high quality have been grown epitaxially on a (0 0 0 1) c-plane of a sapphire substrate with atomic layer deposition (ALD) at extra-low temperature. With diethylzinc (DEZn) and deionized water as precursors in combination with interrupted flow, we obtained ZnO thin films with an optimal growth window in a range 25-160 degrees C, so effectively lowering the growth temperature by about 120 degrees C relative to the conventional method involving a continuous-flow. We characterized the microstructure of these films with X-ray reflectivity and high-resolution X-ray diffraction (XRD) measurements. The XRD results indicate that the stock time might extend the reaction of DEZn and water through an increased duration. This low temperature for growth results in increased crystalline quality and reduced the non-radiative recombination process to enhance the optical properties of ZnO films. (c) 2009 Elsevier B.V. All rights reserved.