<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css"> Skip to main content

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作,涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 10 of 12
  • Item type:Item,
    Breakthrough to Non-Vacuum Deposition of Single-Crystal, Ultra-Thin, Homogeneous Nanoparticle Layers: A Better Alternative to Chemical Bath Deposition and Atomic Layer Deposition
    (2017-04-01)
    Liao, Yu-Kuang
    ;
    Liu, Yung-Tsung
    ;
    Hsieh, Dan-Hua
    ;
    Shen, Tien-Lin
    ;
    Hsieh, Ming-Yang
    Most thin-film techniques require a multiple vacuum process, and cannot produce high-coverage continuous thin filmswith the thickness of a fewnanometers on rough surfaces. We present a new "paradigm shift" non-vacuum process to deposit high-quality, ultra-thin, single-crystal layers of coalesced sulfide nanoparticles (NPs) with controllable thickness down to a few nanometers, based on thermal decomposition. This provides high-coverage, homogeneous thickness, and large-area deposition over a rough surface, with little material loss or liquid chemical waste, and deposition rates of 10 nm/min. This technique can potentially replace conventional thin-film deposition methods, such as atomic layer deposition (ALD) and chemical bath deposition (CBD) as used by the Cu(In, Ga) Se2 (CIGS) thin-film solar cell industry for decades. We demonstrate 32% improvement of CIGS thin-film solar cell efficiency in comparison to reference devices prepared by conventional CBD deposition method by depositing the ZnS NPs buffer layer using the new process. The new ZnS NPs layer allows reduction of an intrinsic ZnO layer, which can lead to severe shunt leakage in case of a CBD buffer layer. This leads to a 65% relative efficiency increase.
  • Item type:Item,
    High-performance InGaN-based green light-emitting diodes with quaternary InAlGaN/GaN superlattice electron blocking layer
    (2016-05-30)
    Tzou, An-Jye
    ;
    Lin, Da-Wei
    ;
    Yu, Chien-Rong
    ;
    Li, Zhen-Yu
    ;
    Liao, Yu-Kuang
    In this study, high-performance InGaN-based green light-emitting diodes (LEDs) with a quaternary InAlGaN/GaN superlattice electron blocking layer (QSL-EBL) have been demonstrated. The band structural simulation was employed to investigate the electrostatic field and carriers distribution, show that the efficiency and droop behavior can be intensively improved by using a QSL-EBL in LEDs. The QSL-EBL structure can reduce the polarization-related electrostatic fields in the multiple quantum wells (MQWs), leading to a smoother band diagram and a more uniform carriers distribution among the quantum wells under forward bias. In comparison with green LEDs with conventional bulk-EBL structure, the light output power of LEDs with QSL-EBL was greatly enhanced by 53%. The efficiency droop shows only 30% at 100 A/cm(2) comparing to its peak value, suggesting that the QSL-EBL LED is promising for future white lighting with high performance. (C) 2016 Optical Society of America
  • Item type:Item,
    An Investigation of Carbon-Doping-Induced Current Collapse in GaN-on-Si High Electron Mobility Transistors
    (2016-06-01)
    Tzou, An-Jye
    ;
    Hsieh, Dan-Hua
    ;
    Chen, Szu-Hung
    ;
    Liao, Yu-Kuang
    ;
    Li, Zhen-Yu
    This paper reports the successful fabrication of a GaN-on-Si high electron mobility transistor (HEMT) with a 1702 V breakdown voltage (BV) and low current collapse. The strain and threading dislocation density were well-controlled by 100 pairs of AlN/GaN superlattice buffer layers. Relative to the carbon-doped GaN spacer layer, we grew the AlGaN back barrier layer at a high temperature, resulting in a low carbon-doping concentration. The high-bandgap AlGaN provided an effective barrier for blocking leakage from the channel to substrate, leading to a BV comparable to the ordinary carbon-doped GaN HEMTs. In addition, the AlGaN back barrier showed a low dispersion of transiently pulsed I-D under substrate bias, implying that the buffer traps were effectively suppressed. Therefore, we obtained a low-dynamic on-resistance with this AlGaN back barrier. These two approaches of high BV with low current collapse improved the device performance, yielding a device that is reliable in power device applications.
  • Item type:Item,
    Efficiency droop behavior improvement through barrier thickness modification for GaN-on-silicon light-emitting diodes
    (2015-03-05)
    Tzou, An-Jye
    ;
    Lin, Bing-Cheng
    ;
    Lee, Chia-Yu
    ;
    Lin, Da-Wei
    ;
    Liao, Yu-Kuang
    Crack-free GaN-based light-emitting diodes (LEDs) were grown on 150-mm-diameter Si substrates by using low-pressure metal-organic chemical vapor deposition. The relationship between the LED devices and the thickness of quantum barriers (QBs) was investigated. The crystal quality and surface cracking of GaN-on-Si were greatly improved by an AlxGa1-xN buffer layer composed of graded Al. The threading dislocation density of the GaN-on-Si LEDs was reduced to < 7 x 10(8) cm(-2), yielding LEDs with high internal quantum efficiency. Simulation results indicated that reducing the QB thickness improved the carrier injection rate and distribution, thereby improving the droop behavior of the LEDs. LEDs featuring 6-nm-thick QBs exhibited the lowest droop behavior. However, the experimental results showed an unanticipated phenomenon, namely that the peak external quantum efficiency (EQE) and light output power (LOP) gradually decreased with a decreasing QB thickness. In other words, the GaN-on-Si LEDs with 8-nm-thick QBs exhibited low droop behavior and yielded a good peak EQE and LOP, achieving a 22.9% efficiency droop and 54.6% EQE. (C) 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
  • Item type:Item,
    Observation of unusual optical transitions in thin-film Cu(In,Ga)Se-2 solar cells
    (2012-11-05)
    Liao, Yu-Kuang
    ;
    Kuo, Shou-Yi
    ;
    Lin, Woei-Tyng
    ;
    Lai, Fang-I
    ;
    Hsieh, Dan-Hua
    In this paper, we examine photoluminescence spectra of Cu(In,Ga)Se-2 (CIGS) via temperature-dependent and power-dependent photoluminescence (PL). Donor-acceptor pair (DAP) transition, near-bandedge transition were identified by their activation energies. S-shaped displacement of peak position was observed and was attributed to carrier confinement caused by potential fluctuation. This coincides well with the obtained activation energy at low temperature. We also present a model for transition from V-Se to V-In and to V-Cu which illustrates competing mechanisms between DAPs recombinations. (C) 2012 Optical Society of America
  • Item type:Item,
    Growth and characterization of Cu(In,Ga)Se-2 thin films by nanosecond and femtosecond pulsed laser deposition
    (2014-06-02)
    Chen, Shih-Chen
    ;
    Hsieh, Dan-Hua
    ;
    Jiang, Hsin
    ;
    Liao, Yu-Kuang
    ;
    Lai, Fang-I
    In this work, CuIn1-xGaxSe2 (CIGS) thin films were prepared by nanosecond (ns)- and femtosecond (fs)-pulsed laser deposition (PLD) processes. Different film growth mechanisms were discussed in perspective of the laser-produced plasmas and crystal structures. The fs-PLD has successfully improved the inherent flaws, Cu-2 (-) Se-x, and air voids ubiquitously observed in ns-PLD-derived CIGS thin films. Moreover, the prominent antireflection and excellent crystalline structures were obtained in the fs-PLD-derived CIGS thin films. The absorption spectra suggest the divergence in energy levels of radiative defects brought by the inhomogeneous distribution of elements in the fs-PLD CIGS, which has also been supported by comparing photoluminescence (PL) spectra of ns- and fs-PLD CIGS thin films at 15 K. Finally, the superior carrier transport properties in fs-PLD CIGS were confirmed by fs pump-probe spectroscopy and four-probe measurements. The present results indicate a promising way for preparing high-quality CIGS thin films via fs-PLD.
  • Item type:Item,
    Toward Omnidirectional Light Absorption by Plasmonic Effect for High-Efficiency Flexible Nonvacuum Cu(In,Ga)Se-2 Thin Film Solar Cells
    (2014-09-01)
    Chen, Shih-Chen
    ;
    Chen, Yi-Ju
    ;
    Chen, Wei Ting
    ;
    Yen, Yu-Ting
    ;
    Kao, Tsung Sheng
    We have successfully demonstrated a great advantage of plasmonic Au nanoparticles for efficient enhancement of Cu(In,Ga)Se-2(CIGS) flexible photovoltaic devices. The incorporation of Au NPs can eliminate obstacles in the way of developing ink-printing CIGS flexible thin film photovoltaics (TFPV), such as poor absorption at wavelengths in the high intensity region of solar spectrum, and that occurs significantly at large incident angle of solar irradiation. The enhancement of external quantum efficiency and photocurrent have been systematically analyzed via the calculated electromagnetic field distribution. Finally, the major benefits of the localized surface plasmon resonances (LSPR) in visible wavelength have been investigated by ultrabroadband pump-probe spectroscopy, providing a solid evidence on the strong absorption and reduction of surface recombination that increases electron hole generation and improves the carrier transportation in the vicinity of pn-juction.
  • Item type:Item,
    A look into the origin of shunt leakage current of Cu(In,Ga)Se-2 solar cells via experimental and simulation methods
    (2013-10-01)
    Liao, Yu-Kuang
    ;
    Kuo, Shou-Yi
    ;
    Hsieh, Ming-Yang
    ;
    Lai, Fang-I
    ;
    Kao, Ming-Hsuan
    This study investigates how to apply space-charge-limited (SCL) current to describe shunt leakage current in a CIGS solar cell. Possible factors inducing SCL current have been observed through conductive atomic force microscopy (C-AFM), which supports the SCL current theory, describing the shunt current of a CIGS solar cell. In simulations derived from experimental data, deviation of dark IV curves is due to flaws in the real device. These flaws are absent in simulation, but investigation verifies the characteristics of SCL current component's experimental IV curves within shunt leakage current. A device with a metal/CIGS/metal structure could simulate SCL current and confirm its characteristics. Such a simulated structure, representing flaws inserted into a CIGS solar cell, generates the same dark-current behavior revealed in experimental dark IV curves. This study investigates the response of dark current to varying sizes of the flaw within the CIGS solar cell. (C) 2013 Elsevier B.V. All rights reserved.
  • Item type:Item,
    Non-antireflective Scheme for Efficiency Enhancement of Cu(In,Ga)Se-2 Nanotip Array Solar Cells
    (2013-08-01)
    Liao, Yu-Kuang
    ;
    Wang, Yi-Chung
    ;
    Yen, Yu-Ting
    ;
    Chen, Chia-Hsiang
    ;
    Hsieh, Dan-Hua
    We present systematic works in characterization of CIGS nanotip arrays (CIGS NTRs). CIGS NTRs are obtained by a one-step ion-milling process by a direct-sputtering process of CIGS thin films (CIGS TF) without a postselenization process. At the surface of CIGS NTRs, a region extending to 100 nm in depth with a lower copper concentration compared to that of CIGS TF has been discovered. After KCN washing, removal of secondary phases can be achieved and a layer with abundant copper vacancy (V-Cu) was left. Such compositional changes can be a benefit for a CIGS solar cell by promoting formation of Cd-occupied Cu sites (Cd-Cu) at the CdS/CIGS interface and creates a type-inversion layer to enhance interface passivation and carrier extraction. The raised V-Cu concentration and enhanced Cd diffusion in CIGS NTRs have been verified by energy dispersive spectrometry. Strengthened adhesion of Al:ZnO (AZO) thin film on CIGS NTRs capped with CdS has also been observed in SEM images and can explain the suppressed series resistance of the device with CIGS NTRs. Those improvements in electrical characteristics are the main factors for efficiency enhancement rather than antireflection.
  • Item type:Item,
    Enhanced broadband and omnidirectional performance of Cu(In,Ga)Se-2 solar cells with ZnO functional nanotree arrays
    (2013)
    Hsieh, Ming-Yang
    ;
    Kuo, Shou-Yi
    ;
    Han, Hau-Vei
    ;
    Yang, Jui-Fu
    ;
    Liao, Yu-Kuang
    An effective approach is demonstrated for enhancing photoelectric conversion of Cu(In,Ga)Se-2 (CIGS) solar cells with three-dimensional ZnO nanotree arrays. Under a simulated one-sun condition, cells with ZnO nanotree arrays enhance the short-circuit current density by 10.62%. The omnidirectional anti-reflection of CIGS solar cells with various ZnO nanostructures is also investigated. The solar-spectrum weighted reflectance is approximately less than 5% for incident angles of up to 60 degrees and for the wavelengths primarily from 400 nm to 1000 nm. This enhancement in light harvesting is attributable to the gradual refractive index profile between the ZnO nanostructures and air.