<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Tseng, Chih-YungSubject: search.filters.subject.Partial bypass

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item type:Item,
    A novel "partial bypass" concept to augment the performance of air-cooled heat exchangers
    (2012-09-01)
    Wang, Chi-Chuan
    ;
    Chen, Kuan-Yu
    ;
    Liaw, Jane-Sunn
    ;
    Tseng, Chih-Yung
    ;
    機械工程學系
    This study proposes a novel "partial bypass" concept which facilitates the heat transfer augmentation without the pumping power penalty. The basic idea is to introduce bypass cold stream which bypasses the front part of the heat exchanger and mixes with the hot stream across the front part of the heat exchanger, and the mixed stream flows through the rear part of the heat exchanger. Through this concept, heat transfer performance at the front part is slightly reduced but the rear part is substantially increased. The concept can be implemented with either maintaining the same total flowrate, heat transfer rate but accompanies with a much lower pressure drop or it can be applied with the same pumping power but accompanies with a much higher heat transfer rate. It is found that the "partial bypass" concept is especially fruitful for a heat exchanger with a comparatively large number of transfer unit (NTU). The concept is especially helpful in the design of a deep tube bank operated at lower frontal velocity. For validating the proposed concept, the calculation is also compared with the experimental measurements, and good agreement amid the calculations and measurements are reported. (C) 2012 Elsevier Ltd. All rights reserved.
  • Thumbnail Image
    Item type:Item,
    Effect of partial bypass on the heat transfer performance of dehumidifying coils
    (2014-11-01)
    Wang, Chi-Chuan
    ;
    Cheng, Yu-Cheng
    ;
    Liaw, Jane-Sunn
    ;
    Tseng, Chih-Yung
    ;
    機械工程學系
    This study extends a so called "partial bypass" concept to dehumidifying fin-and-tube heat exchangers. Tests are performed for a 2-row and 4-row fin-and-tube heat exchangers having plain fin configuration. The inlet dry bulb temperature is fixed at 25 degrees C while the inlet relative humidities are 50% and 80%, respectively. Test results showed that for a 2-row coil under RH = 50%, the corresponding heat transfer augmentation ratio (Q(R)) and pressure penalty ratio (P-R) decrease with the rise of bypass ratio (BR). At a smaller frontal velocity, the regime of appropriate bypass ratio where Q(R) > 1 and P-R < 1 is more apparent. The effect of partial bypass decreases as the velocity increases. As the velocity gets close to 2 m s(-1), it shows that the performance at high bypass ratio becomes more efficient. At the same time, when bypass ratio becomes lager, the tendency of the decreasing of Delta P is more drastic than the decreasing of Q. Nevertheless, not for all the cases that the performances get better as the bypass ratio increases. For V-fr = 4 m s(-1), the experiment results show that the overall effect is less efficient\' than at V-fr = 2 m s(-1). The major reason is caused by the flow pattern. The rise of bypass airflow is quite large which may act as an air curtain to distort the main airflow, and result in higher pressure drop. This implies that the design of the bypass design is quite imperative in the practice of real applications. For a 4-row heat exchanger, the experiment data of QR and PR for the 4-row coil performs better than a 2-row coil. (C) 2014 Elsevier Ltd. All rights reserved.