<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Wang, JSSubject: search.filters.subject.molecular beam epitaxy

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item type:Item,
    High nitrogen content InGaAsN/GaAs single quantum well for 1.55 mu m applications grown by molecular beam epitaxy
    (2004-02-15)
    Wang, JS
    ;
    Kovsh, AR
    ;
    Hsiao, RS
    ;
    Chen, LP
    ;
    Chen, JF
    The growth of high nitrogen content InGaAsN/GaAs single quantum well (SQW) for 1.55 mum applications on GaAs substrates using solid source molecular beam epitaxy and radio frequency plasma nitrogen source is reported. The nitrogen composition was determined using an X-ray diffractometer combined with dynamic simulation. The crystal and optical qualities of highly strained InGaAs/GaAs SQW grown at low temperature can be significantly improved by nitrogen incorporation due to reducing the lattice mismatch. Without the formation of additional nonradiative recombination in InGaAsN SQW with nitrogen composition up to 4.1% which corresponds to wavelength of 1.46 mum was achieved. The longest room-temperature PL peak wavelength obtained in this study is 1.59 mum by increasing the nitrogen composition up to 5.3%. And, the photoluminescence intensity of high nitrogen content InGaAsN SQW can be improved significantly by decreasing the growth temperature due to suppression of the phase separation of InGaAsN alloy. Our results show the potential for the fabrication of 1.55 mum InGaAsN QW lasers on GaAs substrates. (C) 2003 Elsevier B.V. All rights reserved.
  • Thumbnail Image
    Item type:Item,
    Single mode 1.3 mu m InGaAsN/GaAs quantum well vertical cavity surface emitting lasers grown by molecular beam epitaxy
    (2004-12-01)
    Hsiao, RS
    ;
    Wang, JS
    ;
    Lin, KF
    ;
    Wei, L
    ;
    Liu, HY
    The growth by molecular-beam-epitaxy of high-quality 1.3 mum InGaAsN/GaAs quantum wells (QW) intra-cavity contacted vertical cavity surface emitting lasers (VCSELs) was demonstrated. Low-temperature growth, which suppresses the phase separation significantly improves material quality in the active region. Room-temperature continuous wave (RT-CW) single mode output power of 0.75 mW with an initial slope efficiency of 0.17 W/A and a side mode suppression ratio of 40 dB at a lasing wavelength of as long as 1304 nm were obtained.
  • Thumbnail Image
    Item type:Item,
    Growth mode transfer of self-assembled CdSe quantum dots grown by molecular beam epitaxy
    (2006-01-15)
    Lai, YJ
    ;
    Lin, YC
    ;
    Fu, CP
    ;
    Yang, CS
    ;
    Chia, CH
    Self-assembled CdSe/ZnSe quantum dots (QDs) were grown at various growth temperatures on GaAs (0 0 1) by molecular beam epitaxy. An optimum growth temperature for CdSe/ZnSe QDs was found to be 260 degrees C. The Stranski-Krastanow (SK) growth mode was confirmed clearly by atomic force microscopy images. The coherent SK QDs were observed from 2.5 monolayers (MLs). Two types of QDs were found with the CdSe coverage of 3.0 MLs. It was attributed to a growth mode change from the coherent SK growth mode to the ripening growth mode. A schematic diagram of the growth mechanism of self-assembled CdSe QDs was presented. Moreover, the photoluminescence spectra of samples with various thicknesses were investigated. A dramatic change of optical properties confirmed that the QD structure formed with thickness above 2.5 MLs. Finally, the dot size and the density distributions were controlled after growth by in-chamber thermal annealing. For the sample grown at 3.0 MLs, the distribution of dot sizes was controlled from 6.0 to 6.5 x 10(3) nm(3) at an annealing temperature of 400 degrees C. (c) 2005 Published by Elsevier B.V.