<link rel="stylesheet" href="styles.cf390c6bfbe7555f.css">

學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Author: search.filters.author.Wei, Hung-JuSubject: search.filters.subject.CMOS

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item type:Item,
    Flicker Noise and Power Performance of CMOS Gilbert Mixers Using Static and Dynamic Current-Injection Techniques
    (2010-01-01)
    Wei, Hung-Ju
    ;
    Meng, Chinchun
    ;
    Chien, Hsin-I
    ;
    Lu, Hsi-Liang
    ;
    Syu, Jin-Siang
    The Gilbert Mixers using static and dynamic current-injection techniques are all implemented in 0.13 mu m CMOS technology. As the experimental results, the dynamic injection technique has higher conversion gain, less sensitivity to current injection, smaller required LO power, better noise figure and lower flicker noise when the transistor size and biasing condition are the same as that of static injection technique for a fair comparison.
  • Thumbnail Image
    Item type:Item,
    A Chebyshev-Response Step-Impedance Phase-Inverter Rat-Race Coupler Directly on Lossy Silicon Substrate and Its Gilbert Mixer Application
    (2011-04)
    Wei, Hung-Ju
    ;
    Meng, Chinchun
    ;
    Yu, Sheng-Wen
    ;
    Chang, Chia-Hung
    ;
    電機工程學系
    This paper focuses on the analysis and the design methodology of the step-impedance phase-inverter rat-race coupler on a silicon-based process. The issues of impedance limitation and bandwidth are discussed in detail. Our proposed concept utilizes a high silicon dielectric constant, phase-inverter structure, step-impedance technique, and Chebyshev response to make the rat-race coupler more compact (similar to 64 reduction) and highly balanced over a wide operating bandwidth. Moreover, the inter-digital coplanar stripline used in the step-impedance section effectively reduces the characteristic impedance of the transmission line for large size shrinkage and insertion-loss reduction. The demonstrated step-impedance rat-race coupler directly on silicon substrate has 6- similar to 7-dB insertion loss from 5 to 15 GHz and small variations in amplitude/phase balance. Compared with our previous work, the proposed rat-race coupler achieves a 3-dB improvement in the insertion loss. Thus, a 0.13-mu m CMOS Gilbert down-converter with a miniature phase-inverter rat-race coupler at the RF path for wideband single-to-differential signal conversion achieves a noise figure of 16 dB.
  • Thumbnail Image
    Item type:Item,
    A Chebyshev-Response Step-Impedance Phase-Inverter Rat-Race Coupler Directly on Lossy Silicon Substrate and Its Gilbert Mixer Application
    (2011-04)
    Wei, Hung-Ju
    ;
    Meng, Chinchun
    ;
    Yu, Sheng-Wen
    ;
    Chang, Chia-Hung
    ;
    電機工程學系
    This paper focuses on the analysis and the design methodology of the step-impedance phase-inverter rat-race coupler on a silicon-based process. The issues of impedance limitation and bandwidth are discussed in detail. Our proposed concept utilizes a high silicon dielectric constant, phase-inverter structure, step-impedance technique, and Chebyshev response to make the rat-race coupler more compact (similar to 64 reduction) and highly balanced over a wide operating bandwidth. Moreover, the inter-digital coplanar stripline used in the step-impedance section effectively reduces the characteristic impedance of the transmission line for large size shrinkage and insertion-loss reduction. The demonstrated step-impedance rat-race coupler directly on silicon substrate has 6- similar to 7-dB insertion loss from 5 to 15 GHz and small variations in amplitude/phase balance. Compared with our previous work, the proposed rat-race coupler achieves a 3-dB improvement in the insertion loss. Thus, a 0.13-mu m CMOS Gilbert down-converter with a miniature phase-inverter rat-race coupler at the RF path for wideband single-to-differential signal conversion achieves a noise figure of 16 dB.