學術出版;;Publications

Permanent URI for this communityhdl:11536/1

收集所有交通大學研究人員與學生個人或團體所發表之各項學術著作，涵蓋期刊論文、教師專書、學位論文等項。;;Collections of Publications of NCTU Researchers and Students Like Journal Papers and Thesis.

Browse

🏛️國立陽明交通大學機構典藏

Search Results

Now showing 1 - 5 of 5

Anterior bone loss after cervical Bryan disc arthroplasty: insight into the biomechanics following total disc replacement
(2020-08-01)
Chen, Tse-Yu
;
Chen, Wen-Hsien
;
Tzeng, Chung-Yuh
;
Huang, Chi-Wei
;
Yang, Chih-Chang
BACKGROUND CONTEXT: Cervical disc arthroplasty (CDA) is an innovative procedure launched in the early 2000s. Compared with anterior cervical discectomy and fusion, many studies show that CDA offers equivalent clinical outcomes while reducing secondary procedures and total cost. PURPOSE: We sought to determine the incidence of anterior bone loss after CDA and the related biomechanical effects. STUDY DESIGN/SETTING: Retrospective chart review. PATIENT SAMPLE: Patients who underwent CDA with one level Bryan Disc (Medtronic SofamorDanek, Memphis, TN, USA) at one institution. OUTCOME MEASURES: Radiological measurements, including the extent of anterior bone loss, global alignment angle, shell angle, lordotic angle, mean degree of angle of the endplate with the horizontal line, global range of motion (ROM) and ROM of the index level were recorded. The grading of anterior bone loss of the index level was defined as Grade 0, no remodeling; Grade 1, spur disappearance or mild change in body contour; Grade 2, obvious bone regression with Bryan Disc exposure. METHODS: Anatomical measures and ROM were compared by grade of bone loss. RESULTS: Of the 121 patients included in the study, anterior bone loss was found in 53 (43.8%) on the upper adjacent level and 54 (44.6%) on the lower adjacent level. Twenty-nine patients (23.9%) had anterior bone loss in both levels. The majority of cases had Grade 1 anterior bone loss. Grade 2 bone loss was noted in the upper adjacent vertebra in only 5 patients and in 4 patients in the lower adjacent vertebra. Age, sex, operative level, and hybrid surgery had no effect on anterior bone loss. Most radiological assessments, including global alignment angle, lordotic angle, mean degree of angle of the endplate with the horizontal line, global ROM, and ROM of the index level, showed no correlation to anterior bone loss. Shell angle was found to be different in groups with or without remodeling in the upper adjacent level: 5.0 degreesin the Grade 0 group and 7.0 degrees in the Grade 1-2 group, p<. 05. CONCLUSIONS: Many more patients than predicted had anterior bone loss. Increasing the shell angle of the artificial disc may increase the incidence of anterior bone loss after CDA. Further study of the biomechanics following CDA should help clarify the mechanisms at work. (c) 2020 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY-NC-ND license. (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Biomechanical evaluation of reconstruction plates with locking, nonlocking, and hybrid screws configurations in calcaneal fracture: a finite element model study
(2017-10-01)
Chen, Ching-Hsuan
;
Hung, Chinghua
;
Hsu, Yu-Chun
;
Chen, Chen-Sheng
;
Chiang, Chao-Ching
Calcaneal fractures are the most common fractures of the tarsal bones. The stability of fixation is an important factor for successful reconstruction of calcaneal fractures. The purpose of this study was to analyze the biomechanical influence of plate fixation with different combinations of locking and nonlocking screws during early weight-bearing phase. A three-dimensional FE foot model was established using ANSYS software, which comprised bones, cartilages, plantar fascia, and soft tissue. Calcaneal plate was fixed with whole locking (WLS), whole nonlocking (WNS), and hybrid screw configurations for FE analysis. The WNS generated a 6.1A degrees and 2.2A degrees Bohler angle decrease compared with the intact model and WLS (WNS: 18.9; WLS: 21.1; intact: 25.0A degrees). Some hybrid screw configurations (Bohler angle: 21.5A degrees and 21.2A degrees) generated stability similar to WLS. The FE results showed that the fragments at the posterior facet and the posterior tuberosity sustained more stress. This study recommends that the hybrid screw configuration with at least four locking screws, two at the posterior facet fragment and two at the posterior tuberosity fragment, is the optimal choice for the fixation of Sanders type IIB calcaneal fractures.
Biomechanical Analysis of Implanted Clavicle Hook Plates With Different Implant Depths and Materials in the Acromioclavicular Joint: A Finite Element Analysis Study
(2016-11)
Lee, Cheng-Hung
;
Shih, Cheng-Min
;
Huang, Kui-Chou
;
Chen, Kun-Hui
;
Hung, Li-Kun
Clinical implantation of clavicle hook plates is often used as a treatment for acromioclavicular joint dislocation. However, it is not uncommon to find patients that have developed acromion osteolysis or had peri-implant fracture after hook plate fixation. With the aim of preventing complications or fixation failure caused by implantation of inappropriate clavicle hook plates, the present study investigated the biomechanics of clavicle hook plates made of different materials and with different hook depths in treating acromioclavicular joint dislocation, using finite element analysis (FEA). This study established four parts using computer models: the clavicle, acromion, clavicle hook plate, and screws, and these established models were used for FEA. Moreover, implantations of clavicle hook plates made of different materials (stainless steel and titanium alloy) and with different depths (12, 15, and 18mm) in patients with acromioclavicular joint dislocation were simulated in the biomechanical analysis. The results indicate that deeper implantation of the clavicle hook plate reduces stress on the clavicle, and also reduces the force applied to the acromion by the clavicle hook plate. Even though a clavicle hook plate made of titanium alloy (a material with a lower Young\'s modulus) reduces the force applied to the acromion by the clavicle hook plate, slightly higher stress on the clavicle may occur. The results obtained in this study provide a better reference for orthopedic surgeons in choosing different clavicle hook plates for surgery.
Biomechanical analysis of acromioclavicular joint dislocation treated with clavicle hook plates in different lengths
(2015-11-01)
Shih, Cheng-Min
;
Huang, Kui-Chou
;
Pan, Chien-Chou
;
Lee, Cheng-Hung
;
Su, Kuo-Chih
Clavicle hook plates are frequently used in clinical orthopaedics to treat acromioclavicular joint dislocation. However, patients often exhibit acromion osteolysis and per-implant fracture after undergoing hook plate fixation. With the intent of avoiding future complications or fixation failure after clavicle hook plate fixation, we used finite element analysis (FEA) to investigate the biomechanics of clavicle hook plates of different materials and sizes when used in treating acromioclavicular joint dislocation. Using finite element analysis, this study constructed a model comprising four parts: clavicle, acromion, clavicle hook plate and screws, and used the model to simulate implanting different types of clavicle hook plates in patients with acromioclavicular joint dislocation. Then, the biomechanics of stainless steel and titanium alloy clavicle hook plates containing either six or eight screw holes were investigated. The results indicated that using a longer clavicle hook plate decreased the stress value in the clavicle, and mitigated the force that clavicle hook plates exert on the acromion. Using a clavicle hook plate material characterized by a smaller Young\'s modulus caused a slight increase in the stress on the clavicle. However, the external force the material imposed on the acromion was less than the force exerted on the clavicle. The findings of this study can serve as a reference to help orthopaedic surgeons select clavicle hook plates.
Effect of the cord pretension of the Dynesys dynamic stabilisation system on the biomechanics of the lumbar spine: a finite element analysis
(2011-11-01)
Liu, Chien-Lin
;
Zhong, Zheng-Cheng
;
Hsu, Hung-Wei
;
Shih, Shih-Liang
;
Wang, Shih-Tien
The Dynesys dynamics stabilisation system was developed to maintain the mobility of motion segment of the lumbar spine in order to reduce the incidence of negative effects at the adjacent segments. However, the magnitude of cord pretension may change the stiffness of the Dynesys system and result in a diverse clinical outcome, and the effects of Dynesys cord pretension remain unclear. Displacement-controlled finite element analysis was used to evaluate the biomechanical behaviour of the lumbar spine after insertion of Dynesys with three different cord pretensions. For the implanted level, increasing the cord pretension from 100 to 300 N resulted in an increase in flexion stiffness from 19.0 to 64.5 Nm/deg, a marked increase in facet contact force (FCF) of 35% in extension and 32% in torsion, a 40% increase of the annulus stress in torsion, and an increase in the high-stress region of the pedicle screw in flexion and lateral bending. For the adjacent levels, varying the cord pretension from 100 to 300 N only had a minor influence on range of motion (ROM), FCF, and annulus stress, with changes of 6, 12, and 9%, respectively. This study found that alteration of cord pretension affects the ROM and FCF, and annulus stress within the construct but not the adjacent segment. In addition, use of a 300 N cord pretension causes a much higher stiffness at the implanted level when compared with the intact lumbar spine.

學術出版;;Publications

Browse

Filters

Settings

Sort By

Results per page

🏛️國立陽明交通大學機構典藏

Search Results