Comparison of Ni-metal induced lateral crystallization thin-film transistors fabricated by rapid thermal annealing and conventional furnace annealing at 565 degrees C

檔案

日期

2007-11-01

類型

期刊名稱

JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS

卷期與頁次

第 46 卷第 11 期,頁 7204–7207

ISSN

0021-4922

語言

英文

摘要

Two annealing methods, pulse rapid thermal annealing (RTA) and conventional furnace annealing (CFA), were used to fabricate nickel-induced lateral crystallization (NILC) polycrystalline silicon (poly-Si) at 565 degrees C. It was found that the growth rate of RTA-POLY was 5 times higher than that of CFA-POLY. The performance of RTA-thin-film transistors (TFTs) was not as good as that of CFA-TFT. RTA-TFT showed lower drain current, higher threshold voltage, larger subthreshold swing, lower electron mobility, and lower leakage current than CFA-TFT.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Hu, C.-M., Wu, Y. C. S., & Gong, J.-W. (2007). Comparison of Ni-metal induced lateral crystallization thin-film transistors fabricated by rapid thermal annealing and conventional furnace annealing at 565 degrees C. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 46(11), 7204–7207. https://doi.org/10.1143/JJAP.46.7204

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/10201