標題: A band-pass filter using via-hole-wall cavity
作者: Hwang, Ruey Bing
Pan, Jun Liang
電信工程研究所
Institute of Communications Engineering
關鍵字: via-hole-array waveguide;periodic structures;band-pass filter
公開日期: 1-Jun-2007
摘要: In this paper, we presented a band-pass filter-consisting of a post-wall cavity, resonator. This band-pass filter was fabricated in a two-layered printed circuit board, which includes an input and an output substrate integrated waveguides as the feeding structures in the top layer and a cavity in the bottom layer. The interconnection of the signal between different layers is achieved via the apertures etched on the input and output waveguides and cavity. We found the bandwidth of such a class of band-pass filter could be altered by tuning the length of the coupling apertures. Besides, the pass-band frequency can be estimated by the resonant frequencies of the cavity. We have fabricated the bandpass filter on a low-loss dielectric substrate and measured its S-parameters, including the return- and insertion-loss. In addition, the numerical simulation by the CST microwave studio, a full-wave time-domain numerical method, was also carried out. A good agreement between the measured and simulation results was obtained. (c) 2007 Wiley Periodicals, Inc.
URI: http://dx.doi.org/10.1002/mop.22438
http://hdl.handle.net/11536/10767
ISSN: 0895-2477
DOI: 10.1002/mop.22438
期刊: MICROWAVE AND OPTICAL TECHNOLOGY LETTERS
Volume: 49
Issue: 6
起始頁: 1456
結束頁: 1459
Appears in Collections:Articles


Files in This Item:

  1. 000245815300064.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.