完整後設資料紀錄
DC 欄位語言
dc.contributor.authorTsai, Yu Shengen_US
dc.contributor.authorLin, Jian-Shianen_US
dc.contributor.authorChu, Wei-Pingen_US
dc.contributor.authorWang, Po-Hsunen_US
dc.contributor.authorJuang, Fuh-Shyangen_US
dc.contributor.authorChung, Ming-Huaen_US
dc.contributor.authorChen, Chin-Mingen_US
dc.contributor.authorLiu, Mark O.en_US
dc.date.accessioned2014-12-08T15:15:06Z-
dc.date.available2014-12-08T15:15:06Z-
dc.date.issued2010-05-01en_US
dc.identifier.issn1567-1739en_US
dc.identifier.urihttp://dx.doi.org/10.1016/j.cap.2010.02.015en_US
dc.identifier.urihttp://hdl.handle.net/11536/11345-
dc.description.abstractThe derivatives of C(60), [6,6]-phenyl C61-butyric acid methyl ester (PCBM), and 3-hexylthiophene (P3HT) were dissolved in DCB solvent, then spin coated into an active layer for polymer solar cells. The experimental parameters were studied carefully to obtain the optimum power conversion efficiency (PCE). The primary process for generation of photocurrent in an organic photovoltaic device is the generation of bound electron-hole pairs (excitons) by absorption of energy (photons) from the optical electric field. Modeling was based on the assumption that the photocurrent generation process is the result of the creation and diffusion of photogenerated species (excitons), which are dissociated by charge transfer at the active layer. Improve organic optics absorb by insert organic layer (CuPc or C60) at the active layer/Al interface. This research is divided into two components. First part, we use n-type C60 as transmission layer. When an optimum thickness of C(60) is 5 nm, the J(sc) of polymer solar cell can be increased from 7.26 mA/cm(2) to 7.7 mA/cm(2). The V(oc) decrease is because the energy level of C60 LUMO (lowest unoccupied molecular orbital) at 4.5 eV is higher than the 3.7 eV of PCBM. Second part, we use p-type CuPc as transmission layer. When an optimum thickness of CuPc is 3 nm, the short circuit photo-current density (J(sc)) and open circuit voltage (Voc) of polymer solar cell can be increased from 7.26 mA/cm2 to 8.0 mA/cm2 and 0.56-0.58 V, respectively. The reason is the same as C(60). The Voc increase is because the energy level of CuPc LUMO (lowest unoccupied molecular orbital) at 3.1 eV is lower than the 3.7 eV of PCBM. The Jsc increase is because the 3 nm of CuPc leads to a constructive interference happened in the active layer and thus optical absorption increases. In this study we used 3 nm of CuPc at the active layer/Al interface to enhance the short circuit current density, and the efficiency was increased to 2.94%. (C) 2010 Elsevier B. V. All rights reserved.en_US
dc.language.isoen_USen_US
dc.subjectP3HTen_US
dc.subjectPCBMen_US
dc.subjectPolymeren_US
dc.subjectSolar cellsen_US
dc.subjectOptical resonanceen_US
dc.titleAdjusting optical resonance thickness to increase the conversion efficiency of polymer solar cellsen_US
dc.typeArticle; Proceedings Paperen_US
dc.identifier.doi10.1016/j.cap.2010.02.015en_US
dc.identifier.journalCURRENT APPLIED PHYSICSen_US
dc.citation.volume10en_US
dc.citation.issue3en_US
dc.citation.spageS502en_US
dc.citation.epageS505en_US
dc.contributor.department材料科學與工程學系zh_TW
dc.contributor.departmentDepartment of Materials Science and Engineeringen_US
dc.identifier.wosnumberWOS:000280600000039-
顯示於類別:會議論文


文件中的檔案:

  1. 000280600000039.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。