標題: Switching characteristics in Cu:SiO2 by chemical soak methods for resistive random access memory (ReRAM)
作者: Chin, Fun-Tat
Lin, Yu-Hsien
Yang, Wen-Luh
Liao, Chin-Hsuan
Lin, Li-Min
Hsiao, Yu-Ping
Chao, Tien-Sheng
電子物理學系
Department of Electrophysics
關鍵字: Chemical soaking (CS);Cu:SiO2;Various Cu concentrations;Resistive random access memory (ReRAM)
公開日期: 1-Jan-2015
摘要: A limited copper (Cu)-source Cu:SiO2 switching layer composed of various Cu concentrations was fabricated using a chemical soaking (CS) technique. The switching layer was then studied for developing applications in resistive random access memory (ReRAM) devices. Observing the resistive switching mechanism exhibited by all the samples suggested that Cu conductive filaments formed and ruptured during the set/reset process. The experimental results indicated that the endurance property failure that occurred was related to the joule heating effect. Moreover, the endurance switching cycle increased as the Cu concentration decreased. In high-temperature tests, the samples demonstrated that the operating (set/reset) voltages decreased as the temperature increased, and an Arrhenius plot was used to calculate the activation energy of the set/reset process. In addition, the samples demonstrated stable data retention properties when baked at 85 degrees C, but the samples with low Cu concentrations exhibited short retention times in the low-resistance state (LRS) during 125 degrees C tests. Therefore, Cu concentration is a crucial factor in the trade-off between the endurance and retention properties; furthermore, the Cu concentration can be easily modulated using this CS technique. (C) 2014 Elsevier Ltd. All rights reserved.
URI: http://dx.doi.org/10.1016/j.sse.2014.07.014
http://hdl.handle.net/11536/124058
ISSN: 0038-1101
DOI: 10.1016/j.sse.2014.07.014
期刊: SOLID-STATE ELECTRONICS
Volume: 103
起始頁: 190
結束頁: 194
Appears in Collections:Articles