標題: Application of porous oxide layer in plastic/metal direct adhesion by injection molding
作者: Yeh, Ren-Yu
Hsu, Ray-Quen
機械工程學系
Department of Mechanical Engineering
關鍵字: plastic;metal;plastic/metal direct adhesion;injection molding;plasma electrolytic oxidation
公開日期: 3-八月-2015
摘要: In this study, porous oxide layers were coated on aluminum sheets by plasma electrolytic oxidation (PEO) treatment. The PEO-treated aluminum sheets were then inserted and direct heated in the injection mold. The melting plastic penetrated and solidified in the micropores during the injection molding process, consequently achieving plastic/metal direct adhesion through micro-mechanical interlocking. The effects of the different surface morphologies of PEO coatings on plastic/metal adhesion were studied by shear test and microscopic characterizations. The microstructures were varied by changing PEO process parameters. The bonding strength was affected by the surface morphology changes, and the experimental results show that the surface porosity is a major factor in the direct adhesion. Reliable joints can be achieved on the porous coating, and the strength was proportional to the surface porosity. The shear strength in this study was in a range of approximately 3-8MPa with 7-20% surface porosity.
URI: http://dx.doi.org/10.1080/01694243.2015.1038955
http://hdl.handle.net/11536/124755
ISSN: 0169-4243
DOI: 10.1080/01694243.2015.1038955
期刊: JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
Volume: 29
Issue: 15
起始頁: 1617
結束頁: 1627
顯示於類別:期刊論文