Performance of piezoelectric fins for heat dissipation

檔案

本條目沒有附加檔案。

至出版者網站查看(DOI) ›

日期

2015-07-01

類型

期刊名稱

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

卷期與頁次

第 86 卷,頁 72–77

ISSN

0017-9310

語言

英文

摘要

In this study, a conceptual design employs the piezoelectric patch to a copper plate to form a so-called piezoelectric fin applicable for heat dissipation. A total of nine piezoelectric fins subject to various bonding and piezoelectric patch are made and tested. A piezoelectric fin array is also fabricated as a substitute of heat sink under natural convection. It is found that the tip displacement and the decay of performance of piezoelectric fin are intimately related to the bonding glues. The bonding glues with a higher Young\'s modulus lead to a larger fin tip displacement. The tip displacement increases with applied voltage and the length of piezoelectric patch and a maximum tip displacement of 10.9 mm is observed for TCE bonding under a 100 V power source. A maximum 64% heat transfer augmentation at a supplied power of 5 W is encountered for the piezoelectric fin array. The corresponding fin displacement in the fin array is suppressed owing to the resistant interactions amid adjacent piezoelectric fins. The heat transfer augmentation is moderately reduced to about 40% when the supplied power is raised to 15 W. (C) 2015 Elsevier Ltd. All rights reserved.

所屬典藏

期刊論文
顯示完整詮釋資料 統計資料

引用此條目

Sheu, W.-J., Chen, G.-J., & Wang, C.-C. (2015). Performance of piezoelectric fins for heat dissipation. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 86, 72–77. https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.072

BibTeX RIS

引用文字依 APA 第 7 版格式自動產生,使用前請再核對。

分享

永久網址:https://ir.lib.nycu.edu.tw/handle/11536/124768