完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChou, C. C.en_US
dc.contributor.authorUang, C. M.en_US
dc.contributor.authorSeible, F.en_US
dc.date.accessioned2014-12-08T15:17:20Z-
dc.date.available2014-12-08T15:17:20Z-
dc.date.issued2006-03-01en_US
dc.identifier.issn1084-0702en_US
dc.identifier.urihttp://dx.doi.org/10.1061/(ASCE)1084-0702(2006)11:2(140)en_US
dc.identifier.urihttp://hdl.handle.net/11536/12600-
dc.description.abstractCompression tests were conducted on two reduced-scale orthotropic plates to verify the design strength of steel box girders for the new San Francisco-Oakland Bay Bridge. The first specimen was composed of three longitudinal closed ribs and a top deck plate. It failed in global buckling, followed by local buckling in the deck plate and ribs. The second specimen, which was composed of four longitudinal T-shaped ribs and a bottom deck plate, experienced global buckling as well as local buckling in the ribs and the deck plate. The ultimate strength and failure mode of both specimens were evaluated by two bridge design specifications: the 1998 AASHTO load and resistance factor design specification and the 2002 Japanese JRA specification. Findings from code comparisons showed that: (1) Sufficient flexural rigidity of ribs were provided for both specimens; (2) the JRA specification slightly overestimated the ultimate strength of both specimens; and (3) neither specifications predicted the observed buckling sequence in Specimen 2. A general-purpose nonlinear finite element analysis program (ABAQUS) was used to perform correlation study. The analysis showed that the ultimate strength and postbuckling behavior of the specimens could be reliably predicted when both the effects of residual stresses and initial geometric imperfections were considered in the model.en_US
dc.language.isoen_USen_US
dc.subjectsteel platesen_US
dc.subjectcompression testsen_US
dc.subjectbridges, cable-stayeden_US
dc.subjectCaliforniaen_US
dc.subjectSan Franciscoen_US
dc.titleExperimental evaluation of compressive behavior of orthotropic steel plates for the new San Francisco Oakland Bay Bridgeen_US
dc.typeArticleen_US
dc.identifier.doi10.1061/(ASCE)1084-0702(2006)11:2(140)en_US
dc.identifier.journalJOURNAL OF BRIDGE ENGINEERINGen_US
dc.citation.volume11en_US
dc.citation.issue2en_US
dc.citation.spage140en_US
dc.citation.epage150en_US
dc.contributor.department土木工程學系zh_TW
dc.contributor.departmentDepartment of Civil Engineeringen_US
dc.identifier.wosnumberWOS:000245203900002-
dc.citation.woscount6-
顯示於類別:期刊論文


文件中的檔案:

  1. 000245203900002.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。