完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chen, CC | en_US |
dc.contributor.author | Kuo, JT | en_US |
dc.contributor.author | Jiang, MS | en_US |
dc.contributor.author | Chin, A | en_US |
dc.date.accessioned | 2014-12-08T15:17:28Z | - |
dc.date.available | 2014-12-08T15:17:28Z | - |
dc.date.issued | 2006-02-01 | en_US |
dc.identifier.issn | 0895-2477 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1002/mop.21353 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/12654 | - |
dc.description.abstract | A parallel coupled-line microstrip filter is designed and implemented on PCB with its maximum bandwidth. In this paper, this filter has presented almost very good characteristics including the simulated bandwidth of 67%. the measured bandwidth of 64%, lower insertion loss of 1.27 dB. and flat response in the pass-band. The maximum bandwidth fabricated on PCB shows good agreement with the theoretically calculated bandwidth of 70% due to the narrower gap size between the coupled lines. (C) 2005 Wiley Periodicals, Inc. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | parallel coupled-line microstrip filter | en_US |
dc.subject | PCB | en_US |
dc.subject | narrower gap | en_US |
dc.title | Study of parallel coupled-line microstrip filter in broadband | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1002/mop.21353 | en_US |
dc.identifier.journal | MICROWAVE AND OPTICAL TECHNOLOGY LETTERS | en_US |
dc.citation.volume | 48 | en_US |
dc.citation.issue | 2 | en_US |
dc.citation.spage | 373 | en_US |
dc.citation.epage | 375 | en_US |
dc.contributor.department | 傳播研究所 | zh_TW |
dc.contributor.department | 電子工程學系及電子研究所 | zh_TW |
dc.contributor.department | Institute of Communication Studies | en_US |
dc.contributor.department | Department of Electronics Engineering and Institute of Electronics | en_US |
dc.identifier.wosnumber | WOS:000234765000048 | - |
dc.citation.woscount | 15 | - |
顯示於類別: | 期刊論文 |