完整後設資料紀錄
DC 欄位語言
dc.contributor.author周恕人en_US
dc.contributor.authorChou, Shu-Jenen_US
dc.contributor.author陳仁浩en_US
dc.contributor.authorChen, Ren-Hawen_US
dc.date.accessioned2015-11-26T00:57:00Z-
dc.date.available2015-11-26T00:57:00Z-
dc.date.issued2015en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT070251003en_US
dc.identifier.urihttp://hdl.handle.net/11536/126826-
dc.description.abstractEVOH對氧分子及PP對水分子具有優越阻障性,結合異種材質製作多層膜可發揮良好綜效,有助於提升綜合阻障性能及降低成本,為未來多層膜發展趨勢。許多研究指出,多層膜能夠造成阻障性大幅提升是高分子結晶變形或分散的結果。 本研究目的主是要探討當多層膜在厚度維持不變,內部層數大幅提升使得層厚大幅下降,其對內部微結構及結晶度的影響。 本研究採用EVOH 與PP二種材質做為研究材料,研究中將使用自行設計之分流模具、擴張模具,搭配實驗室先前架設之共擠出設備,將原為兩層之高分子膜以二的倍數反覆交疊,逐漸增加層數並減低各層厚度,製作EVOH/PP超多層膜,並以熱差掃描熱量分析儀(Differential Scanning Calorimeter, DSC)、光學偏光顯微鏡、掃描式電子顯微鏡觀測各薄膜之結晶度及結構變化。 研究結果顯示,由於層倍增次數增加使得膜厚下降,大幅壓縮層間空間,當層厚小於30μm時,結晶度開始下降,其中多層膜核心層的PP結晶度由層厚45μm時36.94%,在層厚15μm時大幅下降到15.8%。在層厚較厚時可見之球晶,而隨著層厚減薄,觀察到之結晶大幅減少且微結構變得更加均質及分散。 由結晶度及偏光顯微鏡觀測的結果均指向同一結論,結晶成長受空間影響甚鉅,當即層厚縮減至小於球晶尺度時結晶度將大幅下降,期待本研究的結果可在未來做為多層薄膜發展的參考。zh_TW
dc.description.abstractBecause EVOH and PP exhibit superior barrier capabilities against oxygen and water vapor, the combination of these dissimilar materials in a multilayer film can synergistically improve the overall barrier performance and reduce costs. Numerous studies have indicated that the improvement of barrier capabilities in multilayer films is a consequence of crystalline deformation or dispersion. In this study, we investigated a multilayer film whose overall thickness remains unchanged but whose internal layers are significantly multiplied, resulting in a substantial decrease in the thickness of each layer. The transformation affects the internal microstructure and polymer crystallinity of the film. EVOH and PP were used as research materials. We developed a new mold design that can separate and expand co-extruded polymer films using a co-extrusion system. The mold enables repeated overlay of two polymer layers to reduce the layer thickness and increase the number of layers. The specimens were subsequently compared by optical microscopy, scanning electron microscopy, and differential scanning calorimetry to determine the relationships among layer thickness and crystallinity. The results indicate that, as the space between each layer decreases under compression, the crystallinity also begins to decrease. When the thickness is less than 30 μm, the PP crystallinity begins to decrease. The crystallinity of the PP core layer significantly decreases from 36.94% in the case of 45μm layer thickness to 15.8% in the case of 15μm layer thickness. The size of the spherulites visible in the thicker layers is substantially reduced in the thinner layers. Furthermore, the microstructure is becoming more homogeneous and more dispersed. The crystallinity results and the polarized optical microscope observations indicate the same conclusion, i.e., space is a very important factor for crystal growth. The crystallinity of a polymer will sharply decrease when the layer thickness is smaller than the spherulites’ size scale. Hopefully, the results of this research will pave the way for further research in multilayer films.en_US
dc.language.isozh_TWen_US
dc.subject共擠製zh_TW
dc.subject多層膜zh_TW
dc.subject結構zh_TW
dc.subjectCo-extrusionen_US
dc.subjectMulti-layer filmsen_US
dc.subjectStructureen_US
dc.titleEVOH/PP多層膜共擠出的模流與結構的初步探討zh_TW
dc.titlePreliminary Study on the Mold Flow and Structure in the Co-extrusion of EVOH/PP Multi-layer Filmsen_US
dc.typeThesisen_US
dc.contributor.department機械工程系所zh_TW
顯示於類別:畢業論文