完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chang, YH | en_US |
dc.contributor.author | Chieng, WH | en_US |
dc.contributor.author | Liao, CS | en_US |
dc.contributor.author | Jeng, SL | en_US |
dc.date.accessioned | 2014-12-08T15:17:32Z | - |
dc.date.available | 2014-12-08T15:17:32Z | - |
dc.date.issued | 2006-02-01 | en_US |
dc.identifier.issn | 0967-0661 | en_US |
dc.identifier.uri | http://dx.doi.org/10.1016/j.conengprac.2005.01.012 | en_US |
dc.identifier.uri | http://hdl.handle.net/11536/12707 | - |
dc.description.abstract | Multi-axis coordinated trajectory following is important in CNC machines and metal cutting tools. Recently, flight simulators with electrical actuators have been in increasing demand. However, the coordinate control scheme affects the accuracy of the motion because motors have an insufficient load-capacity relative to the hydraulic actuators. The electronic cam (ECAM) is typically used to perform coordinated control. However, selection of the master may determine potentially very different characteristics of motion. This study proposes an automatic master switching method. The conditions and results of the master switching method for ECAM are detailed. The robustness and stability of the proposed control system is also demonstrated using the well-known structured perturbation analysis tool, mu. (c) 2005 Elsevier Ltd. All rights reserved. | en_US |
dc.language.iso | en_US | en_US |
dc.subject | master slave | en_US |
dc.subject | electronic cam | en_US |
dc.subject | structured singular value | en_US |
dc.subject | robust stability | en_US |
dc.title | A novel master switching method for electronic cam control with special reference to multi-axis coordinated trajectory following | en_US |
dc.type | Article | en_US |
dc.identifier.doi | 10.1016/j.conengprac.2005.01.012 | en_US |
dc.identifier.journal | CONTROL ENGINEERING PRACTICE | en_US |
dc.citation.volume | 14 | en_US |
dc.citation.issue | 2 | en_US |
dc.citation.spage | 107 | en_US |
dc.citation.epage | 120 | en_US |
dc.contributor.department | 機械工程學系 | zh_TW |
dc.contributor.department | Department of Mechanical Engineering | en_US |
dc.identifier.wosnumber | WOS:000234339100002 | - |
dc.citation.woscount | 2 | - |
顯示於類別: | 期刊論文 |