完整後設資料紀錄
DC 欄位語言
dc.contributor.author蕭有容en_US
dc.contributor.authorHsiao, Yu-Jungen_US
dc.contributor.author林聖迪en_US
dc.contributor.authorLin, Sheng-Dien_US
dc.date.accessioned2015-11-26T01:02:52Z-
dc.date.available2015-11-26T01:02:52Z-
dc.date.issued2015en_US
dc.identifier.urihttp://140.113.39.130/cdrfb3/record/nctu/#GT070250121en_US
dc.identifier.urihttp://hdl.handle.net/11536/127721-
dc.description.abstract在此論文中我們運用了台積電的0.18微米標準製程所製作的單光子累增崩潰二極體(Single Photon Avalanche Diodes, SPADs)元件,搭配被動截止、主動恢復電路實現一個12X12像素的平行輸出影像陣列。我們也建立了SPAD陣列的讀取介面,在此系統中先利用FPGA來計數訊號,再利用RS232進行資料傳輸,最後以Labview軟體呈現影像。此影像陣列擁有好的均勻度,平均暗計數為8082.82赫茲,平均光偵測率為2.97%。影像陣列大小為1.2X1.2平方毫米,填充因子為1.61%,成像功能則由成像一個市售的0.36英吋紅光七段顯示器來驗證。zh_TW
dc.description.abstractIn this work, we realize a 12X12 pixels parallel output image array with a single photon avalanche diodes (SPADs) by using TSMC 0.18μm technology and by applying the passive-quenching active-reset circuit. We also build a read out interface for the SPAD array. In the system, FPGA and RS232 are used for signal counting and data transmission, and Labview software is for measured image display. The SPADs array has a good device uniformity with the mean dark count rate of 8082.87 Hz and with the mean photon detection efficiency of 2.97 %. The size of fabricated image array is 1.2X1.2 mm2, and its fill factor is 1.61%. The imaging function is demonstrated by taking a picture of a ready-made 0.36 inch red light seven segment.en_US
dc.language.isozh_TWen_US
dc.subject單光子偵測器zh_TW
dc.subject影像陣列zh_TW
dc.subject平行輸出zh_TW
dc.subject標準製程zh_TW
dc.subjectSPADen_US
dc.subjectFPGAen_US
dc.subjectRS232en_US
dc.subjectTSMCen_US
dc.title單光子累增崩潰二極體之平行輸出影像陣列zh_TW
dc.titleImage Array of Single Photon Avalanche Diodes with Parallel Outputen_US
dc.typeThesisen_US
dc.contributor.department電子工程學系 電子研究所zh_TW
顯示於類別:畢業論文