標題: The influence of serration on a shaving cutter with a pre-designed relief portion
作者: Chang, SL
Wu, UD
Hsieh, JK
Tseng, CH
Cheng, SD
Chang, KR
機械工程學系
Department of Mechanical Engineering
關鍵字: shaving cutter;serration;hob cutter;finite element method
公開日期: 2006
摘要: In this paper, a shaving cutter with serration and a pre-designed relief portion manufactured by a hob cutter was designed. Due to the non-conventional manufacturing process, standard manufacturing problems were avoided and the production efficiency was enhanced as was the stiffness of the shaving cutter. Two solid models of the shaving cutter, one with the novel relief portion and the other a relief hole, were set up for stress analysis using the finite element method. The models confirmed that the shaving cutter with the novel relief portion had a higher stiffness compared to that with a relief hole in the presence of serration.
URI: http://hdl.handle.net/11536/12780
ISBN: 0-87849-990-3
ISSN: 0255-5476
期刊: PROGRESS ON ADVANCED MANUFACTURE FOR MICRO/NANO TECHNOLOGY 2005, PT 1 AND 2
Volume: 505-507
起始頁: 961
結束頁: 966
顯示於類別:會議論文