標題: Two new D-A conjugated polymers P(PTQD-Th) and P(PTQD-2Th) with same 9-(2-octyldodecyl)-8H-pyrrolo[3,4-b]bisthieno[2,3-f:3 ',2 '-h]quinoxaline-8,10(9H)-dione acceptor and different donor units for BHJ polymer solar cells application
作者: Keshtov, M. L.
Kuklin, S. A.
Chen, F. C.
Khokhlov, A. R.
Peregudov, A. S.
Siddiqui, S. A.
Sharma, G. D.
光電工程學系
Department of Photonics
關鍵字: Strong acceptor-weak donor D-A copolymer;Bulk heterojunction;Polymer solar cells;Solvent additive;Power conversion efficiency
公開日期: 1-Sep-2015
摘要: We report the synthesis, characterization and photovoltaic properties of bulk heterojunction polymer solar cells of new donor-acceptor conjugated copolymers P(PTQD-Th) and P(PTQD-2Th) that incorporate same strong 9-(2-octyldodecyl)-8H-pyrrolo[3,4-b]bisthieno[2,3-f:3\',2\'-h]quinoxaline-8,10(9H)-dione as strong acceptor and different weak thiophene (Th) and bi-thiophene (2Th) as donors, respectively. Both the copolymers showed suitable unoccupied lowest molecular orbital (LUMO) energy levels, compatible with the LUMO of PC71BM for efficient electron transfer from copolymer to PC71BM in the blended copolymer: PC71BM thin films. Moreover the deeper highest occupied molecular orbital (HOMO) energy levels of both copolymers ensures the high open circuit voltage (V-oc) of the BHJ polymer solar cells. The optimized P(PTQD-Th):PC71BM and P(PTQD-2Th):PC71BM with weight ratio of 1: 2 processed with chloroform solvent showed PCE of 3.65% and 3.96%, respectively. The higher value of J(sc) for the device processed with P(PTQD-2Th):PC71BM as compared to that for P(PTQD-Th):PC71BM, attributed to narrower optical bandgap and broader absorption profile for P(PTQD-2Th) as compared to P(PTQD-Th). The PCE values of polymer solar cells were further improved (5.54% and 5.67% for P(PTQD-Th):PC71BM and P(PTQD-2Th):PC71BM, respectively) when small amounts of solvent additive, i.e. 1,8-diiodoctane (DIO) were used for the processing of active layers. The improved PCE has been attributed to both the enhanced values of short circuit current (J(sc)) and fill factor (FF) due to the better nanomorphology and charge transport, induced by the high boiling point of solvent additive. (C) 2015 Elsevier B.V. All rights reserved.
URI: http://dx.doi.org/10.1016/j.orgel.2015.05.023
http://hdl.handle.net/11536/127986
ISSN: 1566-1199
DOI: 10.1016/j.orgel.2015.05.023
期刊: ORGANIC ELECTRONICS
Volume: 24
起始頁: 137
結束頁: 146
Appears in Collections:Articles