完整後設資料紀錄
DC 欄位語言
dc.contributor.authorTsou, Yu Linen_US
dc.contributor.authorGong, Cihun-Siyong Alexen_US
dc.contributor.authorJou, Christina F.en_US
dc.date.accessioned2015-12-02T03:00:58Z-
dc.date.available2015-12-02T03:00:58Z-
dc.date.issued2014-01-01en_US
dc.identifier.isbn978-1-4799-4851-2en_US
dc.identifier.issnen_US
dc.identifier.urihttp://hdl.handle.net/11536/128623-
dc.description.abstractAn ISM band sub-100 mu W Wake-Up Receiver (WuRx) has been presented in this study. Issues regarding tradeoffs between system architectures for Ultra-Low Power (ULP) WuRx are analyzed and compared. Push-Pull Current Re-Use (PPCRU) topology with programmable bias-controlled technique has been proposed for maximum conversion gain requirement for minimum power consumption. The chip of WuRx is 0.79 mm(2) in size and has been implemented in a 0.18-mu m CMOS technology. Measurement shows this technique increases conversion gain by 4.8 dB without extra core current consumption which comes the result of 3.7 dB figure-of-merit (FOM) improvement. Minimum power consumption of WuRx is 88.8 mu W from 1.2-V supply. When operating at 100 kbps data rate, the sensitivity is -63 dBm (10(-3) BER) with 888-pJ/b energy consumption. Owing to gain improvement function in RF front end, the optimum FOM of 183.4 dB can be achieved. Therefore, the proposed gain-improved technique fulfills optimum system performance between power consumption and conversion gain requirement.en_US
dc.language.isoen_USen_US
dc.titleAn Ultra Low-power Wakeup Receiver for Energy-efficient Wireless Senor Networken_US
dc.typeProceedings Paperen_US
dc.identifier.journal2014 IEEE INTERNATIONAL CONFERENCE ON CONSUMER ELECTRONICS - TAIWAN (ICCE-TW)en_US
dc.contributor.department交大名義發表zh_TW
dc.contributor.departmentNational Chiao Tung Universityen_US
dc.identifier.wosnumberWOS:000361019800003en_US
dc.citation.woscount0en_US
顯示於類別:會議論文