完整後設資料紀錄
DC 欄位語言
dc.contributor.authorShu, YLen_US
dc.contributor.authorJeng, WJen_US
dc.contributor.authorChiu, CWen_US
dc.contributor.authorChen, CHen_US
dc.date.accessioned2014-12-08T15:18:31Z-
dc.date.available2014-12-08T15:18:31Z-
dc.date.issued2005-09-01en_US
dc.identifier.issn0308-0501en_US
dc.identifier.urihttp://dx.doi.org/10.1002/fam.890en_US
dc.identifier.urihttp://hdl.handle.net/11536/13321-
dc.description.abstractFume exhaust pipes used in semiconductor facilities underwent a series of fire tests to evaluate the performance of a water mist system. The parameters considered were the amount of water that the mist nozzles used, the air flow velocity, the fire intensity and the water mist system operating pressure. In order to make a performance comparison, tests were also performed with a standard sprinkler system. The base case served as a reference and applied a single water mist nozzle (100 bar operating pressure, 7.31/min water volume flux and 200 pin mean droplet size) installed in the pipe (60 cm in diameter) subjected to a 350 degrees C air flow with an average velocity of 2 m/s. In such a case, the temperature in the hot flow dropped sharply as the water mist nozzle was activated and reached a 60 degrees C saturation point. Under the same operating conditions, four mist nozzles were applied, and made no further contribution to reducing the fire temperature compared with the case using only a single nozzle. Similar fire protection performances to that in the base case were still retained when the exhaust flow velocity increased to 3 m/s and the inlet air temperature was increased to 500 degrees C due to a stronger input fire scenario, respectively. Changing to a water mist system produced a better performance than a standard sprinkler. With regard to the effect of operating pressure of water mist system, a higher operating pressure can have a better. performance. The results above indicate that the droplet size in a water-related fire protection system plays a critical role. Copyright (c) 2005 John Wiley & Sons, Ltd.en_US
dc.language.isoen_USen_US
dc.subjectexhaust ducten_US
dc.subjectwater misten_US
dc.subjectfire protectionen_US
dc.subjectsemiconductoren_US
dc.titleAssessment of fire protection performance of water mist applied in exhaust ducts for semiconductor fabrication processen_US
dc.typeArticleen_US
dc.identifier.doi10.1002/fam.890en_US
dc.identifier.journalFIRE AND MATERIALSen_US
dc.citation.volume29en_US
dc.citation.issue5en_US
dc.citation.spage295en_US
dc.citation.epage302en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000232386600003-
dc.citation.woscount0-
顯示於類別:期刊論文


文件中的檔案:

  1. 000232386600003.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。