完整後設資料紀錄
DC 欄位語言
dc.contributor.authorHuang, HYen_US
dc.contributor.authorShyu, SWen_US
dc.contributor.authorTseng, KHen_US
dc.contributor.authorChou, CPen_US
dc.date.accessioned2014-12-08T15:18:33Z-
dc.date.available2014-12-08T15:18:33Z-
dc.date.issued2005-09-01en_US
dc.identifier.issn1362-1718en_US
dc.identifier.urihttp://dx.doi.org/10.1179/174329305X48329en_US
dc.identifier.urihttp://hdl.handle.net/11536/13360-
dc.description.abstractThe aim of the present study was to investigate the effect of specific oxide fluxes on the surface appearance, weld morphology, retained delta ferrite content, hot cracking susceptibility, angular distortion and mechanical properties obtained with the tungsten inert gas (TIG) process applied to the welding of 5 mm thick austenitic stainless steel plates. An autogenous gas tungsten arc welding process was applied to stainless steels through a thin layer of activating flux to produce a bead on plate welded joint. The MnO2 and ZnO fluxes used were packed in powdered form. The experimental results indicated that the 80% MnO2 - 20% ZnO mixture can give full penetration and also a satisfactory surface appearance for type 304 stainless steel TIG flux welds. TIG welding with MnO2 and/or ZnO can increase the measured ferrite number in welds, and tends to reduce hot cracking susceptibility in as welded structures. It was also found that TIG flux welding can significantly reduce the angular distortion of stainless steel weldments.en_US
dc.language.isoen_USen_US
dc.subjectangular distortionen_US
dc.subjectdelta ferriteen_US
dc.subjecthot cracking susceptibilityen_US
dc.subjectstainless steelen_US
dc.subjectTIG fluxen_US
dc.titleEvaluation of TIG flux welding on the characteristics of stainless steelen_US
dc.typeArticleen_US
dc.identifier.doi10.1179/174329305X48329en_US
dc.identifier.journalSCIENCE AND TECHNOLOGY OF WELDING AND JOININGen_US
dc.citation.volume10en_US
dc.citation.issue5en_US
dc.citation.spage566en_US
dc.citation.epage573en_US
dc.contributor.department機械工程學系zh_TW
dc.contributor.departmentDepartment of Mechanical Engineeringen_US
dc.identifier.wosnumberWOS:000234387900008-
dc.citation.woscount21-
顯示於類別:期刊論文