Full metadata record
DC FieldValueLanguage
dc.contributor.authorYang, ACMen_US
dc.contributor.authorWang, RCen_US
dc.contributor.authorKunz, MSen_US
dc.contributor.authorYang, ICen_US
dc.date.accessioned2014-12-08T15:02:42Z-
dc.date.available2014-12-08T15:02:42Z-
dc.date.issued1996-04-30en_US
dc.identifier.issn0887-6266en_US
dc.identifier.urihttp://hdl.handle.net/11536/1344-
dc.description.abstractThe topography of the microscopic shear deformation zones (SDZ) in the glassy polymer PPO was studied by using atomic force microscopy (AFM) and was used to analyze the growth and breakdown of the SDZ. It was found that the local stress and strain are almost constant within the deformation zones but higher than those in the elastic regions. The maximum strain rate during stretching was found to always locate near the SDZ boundaries, indicating that most drawing took place there. With both the local stress and strain obtained for every point within the SDZ, it is possible to construct a full stress-strain curve for the drawing of the tiny local deformation zones. The stress-strain curve clearly demonstrates a yield point in the beginning of microyielding where the tensile modulus was found to be much lower than that in the elastic regime. Some strain hardening, however, took place at larger deformation. Moreover, we found that for each microscopic region participated in the microdrawing the local strain rate increased with local strain until a critical strain around 0.65 was reached, after which the strain rate decreased with strain. This critical strain may be related to the chain entanglement network structure because it shifted to 0.75 when PS diluents were blended into PPO, indicating that strain hardening was delayed by the increase of chain entanglement mesh size. (C) 1996 John Wiley & Sons, Inc.en_US
dc.language.isoen_USen_US
dc.subjectatomic force microscopeen_US
dc.subjectshear deformation zoneen_US
dc.subjectstrain localizationen_US
dc.subjectstrain hardeningen_US
dc.titleDrawing of microshear deformation zones in glassy polymers: Poly(phenylene oxide) (PPO)en_US
dc.typeArticleen_US
dc.identifier.journalJOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICSen_US
dc.citation.volume34en_US
dc.citation.issue6en_US
dc.citation.spage1141en_US
dc.citation.epage1145en_US
dc.contributor.department電子物理學系zh_TW
dc.contributor.departmentDepartment of Electrophysicsen_US
dc.identifier.wosnumberWOS:A1996UC62600016-
dc.citation.woscount5-
Appears in Collections:Articles


Files in This Item:

  1. A1996UC62600016.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.