完整後設資料紀錄
DC 欄位語言
dc.contributor.authorChiang, Cheng-Taen_US
dc.contributor.authorHuang, Yu-Chungen_US
dc.date.accessioned2017-04-21T06:49:38Z-
dc.date.available2017-04-21T06:49:38Z-
dc.date.issued2008en_US
dc.identifier.isbn978-1-4244-1540-3en_US
dc.identifier.issn1091-5281en_US
dc.identifier.urihttp://dx.doi.org/10.1109/IMTC.2008.4547101en_US
dc.identifier.urihttp://hdl.handle.net/11536/135044-
dc.description.abstractIn this paper 12-bit multi-channel non-calibrating dual-mode successive approximation ADC for PMBus devices is newly proposed The proposed dual-mode data converter is attractive due to that all the requirements of the PMBus devices, which are high resolution, low-cost, dual-mode, multi-channel, and low power consumption for portable products, are successfully matched. Based upon the device parameters of 0.25 mu m 1P5M CMOS technology with 3.3/2.5 V power supply, all the functions and performance of the proposed dual-mode data converter for PMBus are successfully tested and proven through SPICE simulations and verified in the measurements. The area of this chip is 1.64 x 1.56 mm(2) and the measured power consumption is 1.683 in W The proposed dual-mode data converter is suitable for power monitoring systems, such as PMBus devices.en_US
dc.language.isoen_USen_US
dc.subjectPMBusen_US
dc.subjectsuccessive approximation A DCen_US
dc.subjectdata converteren_US
dc.subjectpower managementen_US
dc.subjectHSPICEen_US
dc.titleA 12-bit Multi-Channel Non-Calibrating Dual-Mode Successive Approximation ADC for Power Management Bus (PMBus) Devicesen_US
dc.typeProceedings Paperen_US
dc.identifier.doi10.1109/IMTC.2008.4547101en_US
dc.identifier.journal2008 IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1-5en_US
dc.citation.spage568en_US
dc.citation.epage+en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:000261512100109en_US
dc.citation.woscount1en_US
顯示於類別:會議論文