完整後設資料紀錄
DC 欄位語言
dc.contributor.author吳安閣zh_TW
dc.contributor.author陳鴻祺zh_TW
dc.contributor.authorUma, Sankar Routen_US
dc.contributor.authorChen, Hung-Chien_US
dc.date.accessioned2018-01-24T07:37:07Z-
dc.date.available2018-01-24T07:37:07Z-
dc.date.issued2016en_US
dc.identifier.urihttp://etd.lib.nctu.edu.tw/cdrfb3/record/nctu/#GT070260084en_US
dc.identifier.urihttp://hdl.handle.net/11536/138987-
dc.description.abstractIn the field of power electronics, application of interleaving technique can be traced back to very early days both in high power conversion as well as in low power conversion. For three-phase interleaved boost converters, both voltage regulation and current balance are important. In pursuance of avoiding the effects of the current imbalance on the system reliability and thermal stress, the current balancing control method is crucial. However, current balancing techniques should not affect the voltage-regulation loop. Therefore, a decoupled current-balancing control (DCBC) is required. That is, independent PI-type controllers are designed to implement the voltage regulation controller and the current balance controller. In this thesis four different current balancing strategies are presented. The small-signal transfer function for all strategies are derived and compared. The DCBC strategy is further carried out for experiments. The results show that the voltage regulation loop and the current balancing loops are decoupled. All the controllers are implemented in Field Programmable Gate Array (FPGA) system. The provided simulation and experimental results verify the proposed current balancing control.zh_TW
dc.description.abstractIn the field of power electronics, application of interleaving technique can be traced back to very early days both in high power conversion as well as in low power conversion. For three-phase interleaved boost converters, both voltage regulation and current balance are important. In pursuance of avoiding the effects of the current imbalance on the system reliability and thermal stress, the current balancing control method is crucial. However, current balancing techniques should not affect the voltage-regulation loop. Therefore, a decoupled current-balancing control (DCBC) is required. That is, independent PI-type controllers are designed to implement the voltage regulation controller and the current balance controller. In this thesis four different current balancing strategies are presented. The small-signal transfer function for all strategies are derived and compared. The DCBC strategy is further carried out for experiments. The results show that the voltage regulation loop and the current balancing loops are decoupled. All the controllers are implemented in Field Programmable Gate Array (FPGA) system. The provided simulation and experimental results verify the proposed current balancing control.en_US
dc.language.isoen_USen_US
dc.subject均流zh_TW
dc.subject交錯式升壓電路zh_TW
dc.subject數位控制zh_TW
dc.subjectcurrent balancingen_US
dc.subjectinterleaved boost converteren_US
dc.subjectdigital controlen_US
dc.title三相交錯式升壓電路電流平衡控制之分析與實現zh_TW
dc.titleAnalysis and Implementation of Current Balancing Control for Three-Phase Interleaved Boost Convertersen_US
dc.typeThesisen_US
dc.contributor.department電控工程研究所zh_TW
顯示於類別:畢業論文