完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.author | Chen, IC | en_US |
| dc.contributor.author | Hwang, SW | en_US |
| dc.contributor.author | Chen, CH | en_US |
| dc.date.accessioned | 2014-12-08T15:19:41Z | - |
| dc.date.available | 2014-12-08T15:19:41Z | - |
| dc.date.issued | 2005-02-28 | en_US |
| dc.identifier.issn | 0003-6951 | en_US |
| dc.identifier.uri | http://dx.doi.org/10.1063/1.1879103 | en_US |
| dc.identifier.uri | http://hdl.handle.net/11536/13991 | - |
| dc.description.abstract | We have developed a stable green organic electroluminescent (EL) device by using an Al-Cu alloy as a cathode, which has better performance and reliability than the device with an Al cathode. The device with an Al-Cu alloy cathode achieved an EL efficiency of 3.78 cd/A(2.18 lm/W) at 20 mA/cm(2) and the operating voltage was 5.46 V, while device with Al cathode had an EL efficiency of 3.1 cd/A(1.34 lm/W) and 7.3 V at the same drive condition. The Al-Cu device achieved a 20% decay lifetime (t(80)) of 1234 h at an initial brightness of 756 cd/m(2), which is twice the lifetime of conventional device with the state-of-the-art LiF/Al cathode. (C) 2005 American Institute of Physics. | en_US |
| dc.language.iso | en_US | en_US |
| dc.title | Improved performance and stability of organic light-emitting devices with Al-Cu alloy cathode | en_US |
| dc.type | Article | en_US |
| dc.identifier.doi | 10.1063/1.1879103 | en_US |
| dc.identifier.journal | APPLIED PHYSICS LETTERS | en_US |
| dc.citation.volume | 86 | en_US |
| dc.citation.issue | 9 | en_US |
| dc.citation.epage | en_US | |
| dc.contributor.department | 應用化學系 | zh_TW |
| dc.contributor.department | 友訊交大聯合研發中心 | zh_TW |
| dc.contributor.department | Department of Applied Chemistry | en_US |
| dc.contributor.department | D Link NCTU Joint Res Ctr | en_US |
| dc.identifier.wosnumber | WOS:000228991600072 | - |
| dc.citation.woscount | 5 | - |
| 顯示於類別: | 期刊論文 | |

