Full metadata record
DC FieldValueLanguage
dc.contributor.authorHsu, Ming-Yangen_US
dc.contributor.authorLin, Grayen_US
dc.contributor.authorPan, Chien-Hungen_US
dc.date.accessioned2019-04-03T06:41:32Z-
dc.date.available2019-04-03T06:41:32Z-
dc.date.issued2017-12-25en_US
dc.identifier.issn1094-4087en_US
dc.identifier.urihttp://dx.doi.org/10.1364/OE.25.032697en_US
dc.identifier.urihttp://hdl.handle.net/11536/144306-
dc.description.abstractWe have fabricated electrically injected InAs/InGaAs/GaAs quantum-dot (QD) photonic-crystal (PC) surface-emitting lasers (SELs) and successfully demonstrated roomtemperature lasing emissions at 1.3-mu m wavelength for the first time. The PCSEL device fabrication was greatly simplified by deposition of transparent conducting layer of indiumtin- oxide over "PC slab-on-substrate" structure. The threshold current density per QD layer was as low as 50 A/cm(2)/layer; however, the optical output was limited to 2 mW. The bandedge lasing mode was identified and near-circular beam with narrow divergence angle less than 2 degrees was achieved. (C) 2017 Optical Society of America under the terms of the OSA Open Access Publishing Agreementen_US
dc.language.isoen_USen_US
dc.titleElectrically injected 1.3-mu m quantum-dot photonic-crystal surface-emitting lasersen_US
dc.typeArticleen_US
dc.identifier.doi10.1364/OE.25.032697en_US
dc.identifier.journalOPTICS EXPRESSen_US
dc.citation.volume25en_US
dc.citation.issue26en_US
dc.citation.spage32697en_US
dc.citation.epage32704en_US
dc.contributor.department電子工程學系及電子研究所zh_TW
dc.contributor.departmentDepartment of Electronics Engineering and Institute of Electronicsen_US
dc.identifier.wosnumberWOS:000418893200045en_US
dc.citation.woscount5en_US
Appears in Collections:Articles


Files in This Item:

  1. 3334801fba7bc979d209a36d3147ad66.pdf

If it is a zip file, please download the file and unzip it, then open index.html in a browser to view the full text content.